Drilling and Milling M/C

HBM 40 H Deluxe

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm - turning diameter over bed: 1.550 mm - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm Gusdsv Ab Dqopfx Afcsa height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Milling Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with indexable cutter: ø 80 mm Milling capacity: ø 25 mm Gusdpfx Afsg Npiwjcoa Tapping capacity: Ø 22 mm Taper: MT 4 Quill stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg.

Condition: used, Year of construction: 2002, Plotter HP 5000 Serial-No. SG17D1402P Online-Video-Inspection by Skype-Video Guedotzc Rrjpfx Afcea We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm Gsdpfxod S Uf Ss Afcoua top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: used, Pillar drilling machines Godpfxeb N Ezrs Afcjua

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW Godoirax Uspfx Afcjua -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Technical data: Gedpfx Asu At Thefceua - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: new, welding current 15 - 40 A cutting capacity 1 - 16 mm open-circuit voltage 96 V Required air-pressure min. 4 bar Guodpeupxfhsfx Afcsa connected load 3,6 kW connected load frequency 230 V weight 9,0 kg Dimensions (LxWxH) 371 x 153 x 232 mm Exhibition machine !! Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush.

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Gsdsibwarspfx Afcjua Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with flushing water connection Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm ! Price per unit !

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 used steam boiler Gjdpfx Asxnxflsfcsua ----- - mounted on frame - Manufacturer: LOOS, Gunzenhausen Type: UL-S 1250 Output: 1,000 kg/h Permissible operating pressure: 13 bar Increased test pressure: 24.7 bar Total water capacity approx.: 2,320 l Year of manufacture: 10 / 2006 CE marking: CE 0036 Equipped with Weishaupt gas/oil burner GL5/1-D/ZMD, separate control cabinet, feedwater pump, and the existing coarse and fine fittings.