Cold Circular Saw

EISELE VMSIPV410

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Technical data approx: - Compressive force 10 t - throat 150 mm - Table size . 520 x 320 mm - Table height adjustable 160 mm - drop-through hole in table 165 x 125 mm - gr. installation height 220 mm - ram surface 240 x 150 mm - mortise in ram 30 mm - ram adjustability 40 mm - stroke adjustment 4 - 60 mm - stroke rate 130 1/min - hydr. actuated clutch - Two-hand operation - E. foot switch - separate switch cabinet - drive 380 V / 1,1 kW Lhjdpfxsktg Dho Aa Eor - space requirement approx. W 1000 x H 1800 x D 1100 mm - weight approx. 1300 kg

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 0783, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device Lodpfxet A Ar Sj Aa Eehr - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, Year of construction: 1989, saw blade diameter 320 mm cutting diameter 140 mm total power requirement 3 kW Lhedjw Dvivopfx Aa Eor weight of the machine ca. 0,5 t

Condition: new, Year of construction: 2024, The OS 3008 welding extractor is ideal for extracting smoke and fumes generated during welding, polishing, cutting or grinding rare precious metals. It can purify large amounts of harmful metal particles suspended in the air. This machine is characterized by high purification efficiency, low noise emission and takes up a relatively small area. It is adapted for extraction during arc welding, carbon dioxide, MIG/MAG method, gouge arc, welding in the gas environment. Suction power: 3000 m^3/h These extractors are equipped with high-performance filter inserts, distinguished from conventional filters by the presence of a PTFE (Polytetrafluoroethylene) membrane layer. In conventional filters, the length of the fibers of traditional filter materials such as cotton, satin, paper and other cellulose fibers is from 5 to 60 µm. Soot particles contained in the extracted smoke can remain inside the filter, blocking the filter element. When the blockage becomes too large, the ash cannot be effectively removed from the filter element, the air resistance increases and the gas flow decreases. As the filter becomes more contaminated, the filtering efficiency drops dramatically. Lhjdpfstu H N Hox Aa Eer Our filter contains a PTFE membrane layer, the fine structure of which blocks microscopic dust particles. These particles block the dust layer on the surface of the filter material. Most of the dust particles are blocked on the outer surface of the filter, not penetrating the filter interior. Over time, the particles can be removed from the filter by the flow of purified, compressed air. Air volume (m^3/h) 3000 Pressure (Pa) 2000 Filter efficiency (%) 99.9 Power (kW) 3 Filter area 30 Filter size 700 x 750 x 1700 mm Voltage (V) 380 Weight (kg) 90

Condition: used, Year of construction: 1979, bar material dia. max. 50 mm Lodpeucgu Asfx Aa Eohr keins ja

Condition: used, Year of construction: 1991, pressure 60 t throat 280 mm stroke 10 - 90 mm ram adjustment 60 mm no. of strokes 110 Hub/min table surface area 740 x 550 mm clamping plate 740 x 555 mm ram surface 380 x 200 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,850 t Lhedjv Az T Sepfx Aa Eor dimensions of the machine ca. B 1,1 x T 1,6 x H 2,3 m - fixed table - clamping plate - hydraulic clutch Ortlinghaus with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely technically inspected - new colour - shaft pulling, crack inspection, new seals - new control cabinet with touchscreen - current press inspection

Condition: used, pressure 45 t throat 230 mm stroke 8-96 mm total power requirement 4 ps Lhodpswgi Rxjfx Aa Ejr

Condition: new, Year of construction: 1984, pressure 80 t throat 280 mm stroke 10-100 mm no. of strokes 52/80 Hub/min ram - range of adjustment 60 mm table surface area 850x550mm mm ram surface 420x220 mm hole in the table 300x200 mm table height 780 mm tool hole in ram Ø 45 mm weight of the machine ca. 4,5 t Lhodpfx Aajwa Umlj Ejr dimensions of the machine ca. 2000x2000x2700mm m

Condition: good (used), Year of construction: 2002, Metal Circular Saw Behringer Eisele VMS 300 PV Manufacturer: Behringer Eisele Type: VMS 300 PV Year of construction: 2002 Condition: used Cutting range: Straight cut: 120 x 75mm 45° miter cut: 80 x 75mm Speed: 40/80 rpm Weight. 200kg - semi-automatic version - pneumatic quick clamping devices - Infinitely adjustable hydropneumatic saw blade feed Ljdpfoxwl Urjx Aa Eshr - stroke adjustment of the saw unit via clamping lever - generously dimensioned gears with EISELE rotation compensation - Convenient saw blade change Scope of delivery - Operating instructions - 1x saw blade (mounted)

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 190600036, ProfiMaster is a robust-quality filter unit designed for occasional to frequent use during welding with low to medium levels of welding fumes. The disposable filters of the extraction unit have a large capacity and can be replaced with particular ease. The rotatable and swivel extraction hood allows for a 360-degree working radius, minimizing repositioning during welding. - Hose configuration with 4 m arm - Includes start-stop automatic Lsdewxccfspfx Aa Ejhr The unit was purchased in 2019 and, due to operational circumstances, has not been used since spring 2023.