Lifting magnet Magnetic separator Overba

die magnetprofis PEM202200

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnetic separator TYPE DMPM1200 1.800 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnetabmessungen: 1.200x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with tension bearings. Drive: GEMOTEG shaft-mounted geared motor 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz Protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 9 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply especially transversely stable * equipped with stainless alligator connectors RS125 Magnetic properties: Built-in magnetic core: Strontium ferrite Y30 Isdpfx Ajtxn Irja Esik Bonded SfRe strontium hard ferrite magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole pieces tightly closed and sealed.

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor belt with substructure horizontal range: 3,000mm Rising range: 5,000mm Lead angle in the kink: 35, 40 or 45° Total conveyor length: - Drop height: - Height of horizontal: - Conveyor belt width 600mm (extendable) Drive roller + deflection roller Ø150x620mm S235 steel welded and machined Steel deflection roller stored in the kink and crowned overturned Aluminum profile construction 135x45mm reinforced PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: Motor 1.1KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive etc. ready for connection, motor 2 pcs. corrugated edges 80x45mm Iedpfx Aasi Igzfo Esik 39 pcs. T60 studs, pitch 401mm 2-layer particularly laterally stable Usable width 470mm, results as follows: Transverse arrangement -70+45-50+470+50+45-70mm

Condition: as good as new (ex-display), Year of construction: 2023, air pressure: 5.9 bar, Next-generation air plasma system that significantly simplifies system operation for cutting and gouging up to 32 mm. Features automated process setup using advanced RFID-enabled SmartSYNC torch and a revolutionary one-piece consumable cartridge that provides traceable usage data. Technical data: Cutting performance: Recommended cutting capacity: 32 mm - 500 mm/min Maximum cutting capacity: 38 mm - 250 mm/min Severance capacity: 50 mm - 125 mm/min Piercing: 22 mm Typical gouging: Metal removal rate: 8.6 kg per hour Gouge profile: 6.6 mm (D) x 6.0 mm (W) Iisdpfx Ajw U Stqsa Ejk Scope of delivery: Power cable, H105 handheld torch 23 m, 75° Workpiece lead with clamp, Operating manual Option: Hypertherm cartridge reader, software

Condition: used, Year of construction: 2016, operating hours: 11,200 h,

Year of construction: 2005, condition: ready for operation (used), Wielopła Brodpol WP-165 2W - machine in stock - Polish production - Year of production 2005 TECHNICAL PARAMETERS: Iodpjfum U Eefx Aa Esik - cutting width 380 mm - cutting height 165 mm - diameter 300 mm - four upper pulling years - pneumatic roller pressure - four lower pulling rollers - two rows of pawls - diameter of spindles 70 mm - spindle speed 3640 rpm - main engine 2 x 55 kW - total power of 114 kW - 500 mm horizontal clearance Machine dimensions: - length 220 cm - width 180 cm - height 220 cm - weight 2,940 kg

Year of construction: 1992, condition: excellent (used), E.Gillet vertical sawmill cutting line. Wood feeder and receiver included. Maximum cutting length 6.5mb Very good condition. Iijdpfx Aei Egn Uea Esk

Condition: excellent (used), Here we offer you a Zwick / Roell tensile testing machine table-top testing machine.Zwick / Roell material testing machine BDO-FB0.5TH load in tensile / compression direction 500 N height 1565 mm , width 292 mm , depth 469 mmwidth of the test surface: infiniteTest range depth: 100 mmMax working stroke w.o. Accessories 1266 mmPC or printer interface RS 232Required PC connection (for PC operation) COM 1Performance data: 115/230 V (PH, N, PE)Rated power : 0.4 kVAN power frequency: 50/60 HzWeight: 47 kgType: BDO-FB0.5THCondition: used / usedScope supplied: (See picture)(Changes and errors in the technical data, details reserved!)We will be happy to answer any further questions you may have on the phone. Ijdpfsd Sr S Ijx Aa Esik

Condition: ready for operation (used), Year of construction: 1991, | Model | Lokomo C-140B Jaw Crusher | | Feed Opening (Width × Height) | approx. 1400 mm × 1000 mm | | Maximum Feed Size | approx. 600–800 mm | | Strength of Material to be Crushed (e.g. rock) | ~200 MPa (varies significantly depending on material) | | Capacity (Throughput) | estimated 400 t/h | | Motor Power | 200 kW | Iiedpfx Aajxcg Spe Eek | Weight Range | 55 tons |

Condition: like new (used), functionality: fully functional, HBS 840-44-E Bark Shredder totally renovated and as good as new Iiedpfxei E Tkwo Aa Eek

Year of construction: 2012, condition: excellent (used), Merlo Roto 60.24 MCSS from 2012 in very good condition, forks, work basket, remote control, German machine, ready for immediate use Iiodsit I Tgspfx Aa Eek