Injection molding machine
DEMAG System 800/1120-9500

Name: DEMAG System 800/1120-9500
Brand: DEMAG
Availability: InStock

Year of construction

2008

Condition

Used

Location

Wrocław

Injection molding machine DEMAG System 800/1120-9500

Machine data

Machine type:: Injection molding machine

Manufacturer:: DEMAG

Model:: System 800/1120-9500

Year of construction:: 2008

Condition:: excellent (used)

Price & Location

Location:: Kwiatkowskiego 5a, 52-407 Wrocław, Polska

Call

Details about the offer

Listing ID:: A21501007

Update:: 13.03.2026

Description

Injection Moulding Machine DEMAG System 800/1120-9500

Basic Information

Manufacturer: DEMAG
Model: System 800/1120-9500
Year of manufacture: 2008

Clamping Unit

Clamping force: 8,000 kN
Platen dimensions (horizontal × vertical): 1620 × 1500 mm
Tie bar spacing (horizontal × vertical): 1120 × 1000 mm
Minimum mould height: 500 mm
Maximum mould height: 1050 mm
Maximum distance between platens: 2080 mm
Opening stroke: 1030 mm
Ejector stroke: 350 mm
Ejector force: 139 kN
Maximum mould weight: 7,200 kg

Injection Unit

Screw diameter: 130 mm
Injection volume: 7,300 cm³
Shot weight (PS): 6,640 g
Maximum injection pressure: 1,300 bar
Screw length: 20 L/D

Lodpoyugctefx Al Iohh
Electrical & Hydraulic Equipment

Rated pump motor power: 110 kW
Heater power: 79 kW
Hydraulic oil tank capacity: 1,300 l

Machine Dimensions and Weight

Machine dimensions (L × W × H):
12.3 × 2.7 × 2.7 m
Machine weight:
33,500 kg
Control cabinet weight:
9,700 kg

Optional Energy Saving System ESS (Energy Saving Systems)

The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines.

The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand.

Key Advantages

- Up to 30% reduction in electricity consumption
- Servo drive technology for the hydraulic pump
- World-class and proven technology used in the plastics processing industry
- Reduction of energy losses during idle operation
- Lower heating of the hydraulic system
- Longer service life of hydraulic components
- Possibility of installation on existing hydraulic injection moulding machines

The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2019

72 listings online

Call

Send inquiry

Telephone & Fax

+48 71 70... show

These listings may also fit your interest.

Auction

Województwo dolnośląskie

1,728 km

Injection molding machine
DEMAGSystem 800/1120-9500

Details

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 130 mm, ejector force: 139,000 N, opening stroke: 1,030 mm, plate width: 1,500 mm, plate height: 1,620 mm, TECHNICAL DETAILS Lhedpfjy T Hz Iox Al Ijh Clamping force: 8,000 kN Plate size (h x v): 1,620 x 1,500 mm Clear width between tie bars (h x v): 1,120 x 1,000 mm Mold height: 500 - 1,050 mm Maximum plate distance: 2,080 mm Opening stroke: 1,030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7,200 kg Injection system Screw diameter: 130 mm Displacement: 7,300 cm³ Injection weight (PS): 6,640 g Injection pressure: 1,300 bar Screw length: 20 l/d Electrical and hydraulic equipment Rated power of pump motor: 110 kW Heating power: 79 kW Oil tank capacity: 1,300 L MACHINE DETAILS Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33,500 / 9,700 kg

See details

Listing

Wien

1,814 km

Injection molding machine
ENGEL

Call

Listing

Wrocław

1,728 km

Injection molding machine
DEMAGSystem 800/1120–9500

Call

Condition: excellent (used), Year of construction: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar spacing (W × H) 1,120 × 1,000 mm Min. / Max. mould height 500 – 1,050 mm Maximum distance between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Lsdpfjwy U E Uox Al Ijhh Ejector force 139 kN Maximum mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Injection volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electrical-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (auxiliary equipment)

See details

Listing

Vertical Milling Center Deckel Maho DMU 70VL

Heilbronn

1,298 km

Vertical Milling Center
Deckel MahoDMU 70VL

Call

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Ledpfju Hf Ryox Al Ijhh Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

See details

Listing

Demag Concept 250/630-1450 (2006 year) NC4 controll Demag Concept 250/630-1450

Trenčianske Stankovce

1,890 km

Demag Concept 250/630-1450 (2006 year) NC4 controll
DemagConcept 250/630-1450

Call

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Ljdpfjrgw Exox Al Iohh Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

See details

Listing

Machining Center - Universal DECKEL MAHO DMC 60 H linear

Nürnberg

1,406 km

Machining Center - Universal
DECKEL MAHODMC 60 H linear

Call

Condition: used, Year of construction: 2012, x-travel 630 mm y-travel 800 mm z-travel 750 mm control SIN 840D sl Siemens B - axis 360 x 0,001 ° A - axis -200 -- +25 x 0,001 ° spindle turning speed - stepless 20 - 18.000 U/min power capacity at 100 % load 28,00 kW power capacity at 40 % load 34,00 KW max. torque at 40% / 100% load 110 / 84 Nm tool taper HSK 63 feed X/Y/Z/-axis 1 - 100.000 mm/min rapid traverse X/Y/Z 100,00 m/min feed capacity X/Y/Z 9 / 6 / 9 kN feed B-axis 1 - 14.400 °/min feed A-axis 1 - 7.200 °/min size of pallet 2x 500 x 500 mm workpiece weight max. 400 kg max. workpiece diameter 800 mm workpiece height max. 800 mm tool magacine with 63 Lodpfx Aevxwxvsl Iehh diameter of tools max. 280 mm tool length - max. 550 mm weight of tools max. 15,00 kg total power requirement 65,00 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage control, emulsion mist separator, without chip conveyor and without coolant system.

See details

Listing

Napkin Tissue Packaging Machine AMTEC TIS NT-45

Hamburg

1,205 km

Napkin Tissue Packaging Machine
AMTECTIS NT-45

Call

Year of construction: 2025, condition: new, Packaging machine to pack regular shaped objects like stacks of soft fabric oder paper tissues, controlled through touch screen operation and PLC. Including infeed conveyor, no product no bag function, easy change of packaging size. SIEMENS PLC, WEINVIEW Touch Screen, OMRON Relay and Coder, SCHNEIDER AC contactor, PANASONIC servo driver and motor, DANFOSS frequency converter. - Specifications: Bag sizes: L(100-230)xW(100-200)xH(40-100)mm; max. speed of the machine in neutral: 40 cycles/minute; power: 380V, 3.6kW; machine dimensions: L3560xW5885xH1925mm; weight: 3300kg. Ledpsv Nmbbsfx Al Iohh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

See details

Listing

Emergency power generator 550 kVA 500 kVA 500 kW Volvo Penta Notstromaggregat Volvo Penta TAD1642GE

Salzhausen

1,219 km

Emergency power generator 550 kVA 500 kVA 500 kW
Volvo PentaNotstromaggregat Volvo Penta TAD1642GE

€38,000

Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2015, overall weight: 5,000 kg, fuel type: diesel, power: 455 kW (618.63 HP), output current: 820 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 455 kW (618.63 HP), nominal power (apparent): 570 kVA, continuous power (apparent): 570 kVA, total length: 4,500 mm, total width: 1,700 mm, total height: 2,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Volvo Penta, type of cooling: water, For sale is an emergency generator set with 580 kVA / 440 kW in very good condition. Condition: used, as new, fully functional, tested! Rated output: 580 kVA / 440 kW Engine type: Volvo Penta TAD1642GE Operating hours: 150 h Year of manufacture: 2015 Voltage: 400/230 V Frequency: 50 Hz Speed: 1,500 rpm Condition: fully operational, ready for use, tested Includes new maintenance Includes diesel tank Includes batteries Completely operational, immediately ready for use Lsdpfsvgql Esx Al Ishh Price: net €38,000 plus VAT

See details

Listing

Niederlangen

1,037 km

Fork Lift Truck
LINDE - GASH25T

Call

Listing

Injection molding machine Netstal Synergy 1000-230

Weißenburg in Bayern

1,421 km

Injection molding machine
NetstalSynergy 1000-230

Call

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, For sale is an injection molding machine of the brand Netstal and the type Synergy 1000-230 Lhsdpjrfbnmofx Al Ieh After a transportation accident, the control cabinet is completely defective. For this reason, the machine is offered as a spare parts carrier or for repair. Machine would be fully operational and in good condition Technical data: Operating pressure: 210bar, Injection force: 182kN, clamping force: 1000kN, Opening stroke: 0-400mm, mold installation height: 450-750mm Total weight: 7200 kg Operating hours: approx. 53,000 Available from March 2024 First fillings with hydraulic oil can be ordered from us On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

See details

Advertise here