Citizen M32 III

Citizen M32 III

Condition: ready for operation (used), Year of construction: 2004, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, controller manufacturer: CINCOM, This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2004. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details. Machine Benefits Technical Machine Benefits • Max chucking barstock: Ø 32 mm • Max machining lenght: 320 mm • Max drilling diameter main spindle: Ø 12 mm • Max back-spindle drilling: Ø 10 mm • Max. Back-spindle rotating speed: 7. 000 rpm, max. Back-spindle power: 3,5 kw • Gang rotary tool: 5 fixed tools - 4 driven tools • Turret tools: 10 positions • Bar feeder: lemca boss 332 e/r type 37ll - year 2005 • Equipment: chip conveyor Hedpeyi Eh Rsfx Acvjk

Year of construction: 2018, condition: excellent (used), Maximum component weight: 75 kg Maximum moment load of the work table: 1250 g/mm Dimensions of work table: 800 x 890 mm Height of working table: 731 mm Measuring height: 500 mm Total height: 1675 mm Hsdpfx Acsi Dagkovsk

Condition: good (used), Year of construction: 2002, machine/vehicle number: P13147, rotational speed (max.): 8,000 rpm, turning length: 320 mm, equipped with Iemca Boss 432r/32LL new in 2002 - some tool holders - chip conveyor - Mitsubishi MELDAS 635 Control Hodsp T Sy Hspfx Acvjk

Condition: excellent (used), Year of construction: 2020, operating hours: 7,341 h, functionality: fully functional, CNC Swiss-type automatic lathe Make: STAR Model: SX-38 Type A Year: 2020 Equipped with: Hsdpfxjx Sx T Tj Acvsk FANUC 31i Model B5 control, synchronous spindle, powered tools, Y2-axis, Y3-axis, 2x C-axis, X2-axis, X3-axis, B-axis (programmable on linear carrier), independent back machining (8 stations), turret, swarf conveyor and swarf trolley, parts conveyor belt, fire extinguishing system, oil mist extraction, JBS guide bushing unit, can be used as both long and short turning machine, high-pressure pump, bar feeder FMB TURBO 5-65

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 2500–2950 kg Hjdox D Nfuspfx Acvjk This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 5,500 W, spindle speed (max.): 6,000 rpm, total height: 1,858 mm, product length (max.): 3,675 mm, number of axes: 7, General Data Measurements height 1858 mm Dimensions Machine Length 3675 mm Main Drive Number of axis 7 Spindle Speed 6000 RPM Spindle motor power 5.5 kW Hsdpfxex Ixigo Acvsk Technical Specification Driven Tools yes This 7-axis NAKAMURA Tome WT150 II was manufactured in 2020, featuring dual 12-tool turrets and motorized positions for enhanced flexibility. It includes a high-pressure coolant pump and a bar feeder interface with an LNS Quick Load Servo 80 S2. Ideal for complex turn-mill operations, consider the opportunity to buy this NAKAMURA Tome WT150 II turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: used, Manufacturer: CINCINNATI Hodpfxowrpyks Acvok

Condition: good (used), centerless grinding machine Hjdpfx Acstrguvsvek

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Hjdpfeuz If Njx Acvek Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The machine is currently operating in an Italian high-end facility specializing in individual components and custom manufacturing for Formula 1 as well as the aerospace sector. The machine is in exceptional condition. Photos are available upon individual request and under strict confidentiality. CNC turning/milling center (multitasking) with full 5-axis simultaneous machining - 2 turning spindles (main spindle + sub spindle) - B-axis milling head (swivelling milling head) + C-axes on both turning spindles - Designed for complete machining (turning + milling + drilling + threading + contouring) Working area / capacities: - Max. turning diameter: 640 mm - Max. turning length: 1,100 mm - Distance between spindle noses (min./max.): 250 / 1,350 mm - Distance between centers (min./max.): 125 / 1,225 mm - Bar capacity / spindle bore: 71 mm - Chuck diameter (typical for A2-8 configuration): 254 mm (10") Main spindle (left): - Spindle nose: A2-8 - Bar capacity: 71 mm - Speed range: stepless up to 4,500 rpm - Spindle power (depending on spindle package): approx. 22/18.5 kW (alternatively 15/11 kW available depending on package) Sub spindle (right): - Design: fully-fledged sub spindle (workpiece transfer/complete machining) - C-axis available (for milling/indexing operations) - Clamping device: hydraulic chuck (compatible with A2-8 configuration, typically 10") Milling unit / 5-axis kinematics: - B-axis swivel range: 225° (−120° / +105°) - Y-axis: ±125 mm (250 mm total) - X/Y “square stroke” / machining window: 250 mm × 250 mm - X-axis undercut below spindle center: 125 mm (for extended machining range) - C-axis on main and sub spindle (C1/C2) Tool / milling spindle (typical version): - Milling spindle in B-head for drilling/milling/threading/simultaneous machining - Speed (depending on package): approx. 8,000 rpm (higher speeds optionally available) - Power (depending on package): typically up to 18.5 kW (package dependent) Tool handling: - Automatic tool magazine (ATC): 120 positions - Automatic tool changer (magazine/ATC) Hjdeynmgljpfx Acvek Control / software: - Nakamura NT-Smart X user interface / process management - 5-axis capable CNC platform (CAM-compatible complete machining, simultaneous machining) Typical applications and process capability (for your listing): - Complete “done-in-one” machining: turning + milling + drilling + threading + 5-axis contours