Schaudt Mikrosa SASL 125

Schaudt Mikrosa SASL 125

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Hsdpjwcfgbefx Afnjfc Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m Hjdpfx Afouy Ifgsnsfc The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.)

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Hsdpfsqzkdmox Afnofc

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Hedpsw Rrvwefx Afnefc Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Hfsdpfevi Hrysx Afnoc Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Hsdorz Nflspfx Afnsfc Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: used, Year of construction: 2014, workpiece length 100 mm swing diameter 80 mm number of spindles 2 Control FANUC 31i-B5 workpiece weight 2,00 kg centre height 170 mm grinding wheel diameter 100 mm grinding wheel hole diameter 32 Hedjvx Uvfepfx Afnjfc grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Wheelhead variant 12 (two grinding spindles can be moved separately).

Condition: used, Year of construction: 1989, Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/400Year 1983 - Serial-No. V 6.83.1891 Mobile on mobile frame After sealing - automatic transport into tunnel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hfsdpsinla Tofx Afnsc

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, GÖCKEL G50 ELTT Precision grinding machine Year of manufacture: 2005 Magnetic table length: 4500 mm, width: 150 mm CNC controlled Hfsdsv D Huqopfx Afnjc Operational

Condition: good (used), Year of construction: 2000, CNC surface and profile grinding machine Fabr.Ziersch & Baltrusch Type:PROFITLINE ZB 62 NC Hfjdpfxofrbcke Afnjc Year of manufacture.2000 grinding range : 600X270mm Electromagnet with continuous transverse pole pitch 600X200mm. P = 4 mm Wet grinding device, with automatic paper belt filter, machine trough. Complete machine documentation available.