IPM380 Industrial Brush painting Machine

Ceetec IPM380 Industrie Streichautomat Flutanla

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization Lodpfxjv Si Szs Apmshi 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor Lodpfsug Ty Hox Apmohi 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight:

Condition: like new (used), Manufacturer: V. Randwijks Lhjdpjg Snt Sjfx Apmei Rotor Dia.: 500mm Rotor Width: 700mm Electrical Motor: 22kW / 1.470 RPM

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Condition: Well-maintained (training machine) Equipment: Milling unit 5 kW Tool holder, cylindrical, 25 mm with hook spanner clamping Ljdpoxqihcjfx Apmohi Drilling unit 1.5 kW with 19 spindles Crosshead with 4 drilling spindles Saw unit can be swiveled from X to Y. Light barriers in the front area New PC in 2015 Operating system: Windows 98 Weeke software: Woodwop 4.0 Technical data: Travel range X: 3455 mm Travel range Y: 1480 mm Travel range Z: 260 mm External dimensions: Length: approx. 6115 mm Depth: approx. 3660 mm Location: Röllbach Availability: short-term

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total length: 2,150 mm, total width: 1,000 mm, total height: 1,550 mm, type of input current: three-phase, overall weight: 700 kg, workpiece weight (max.): 500 kg, input voltage: 400 V, feed rate X-axis: 30 m/min, conveyor belt width: 400 mm, power: 2 kW (2.72 HP), input frequency: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. The SA380 brush sanding machine offers the following advantages: Lhodpfjw Av Ivox Apmsi 1. Flexible: All profiles, including beams up to 400 mm wide and 260 mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction system 3. Powerful: Automatic feed of 13–30 m/min ensures high throughput 4. Top results: 8 axes with flexible Fladder brushes deliver a perfect finish: 4 sand WITH and 4 sand AGAINST the feed direction (on 4 sides, 2 per side) 5. Safe: Completely enclosed design, requiring only a single 120 mm dust extraction connection The SA250 and SA380 are built to be extremely robust and are manufactured entirely in Denmark. We currently have two demonstration machines in stock.

Condition: excellent (used), Year of construction: 1998, I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Lhodjfzzhyspfx Apmei Year 1998. Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !

Condition: ready for operation (used), For sale: a conveyor belt with dimensions of 1x3 meters, ready for operation. ✅ Length: 1x3 m ✅ Belt width: 0.4 m ✅ Transport can be arranged ✅ A wide selection of conveyor belts is available on site Please contact us. We will help you choose the right conveyor belt to meet your needs. Lhsdpfxot R R T Te Apmji

Condition: new, HIGH PERFORMANCE - BUILT FOR PROCESSING SINGLE, DOUBLE, AND HEAVY-DUTY BOARD! Main features: - 40+ pre-installed FEFCO styles, 100+ available box shapes - One-pass operation for seamless box production - Supports single, double-wall, and high-strength board - Works with sheets and concertina board - Integrated die-cutting system - Fast tool changeover - less than 20 seconds - Fully automatic servo drive setup - Large 19" touchscreen HMI with intuitive software - Slotting, creasing, cutting, gluing, and printing in a single operation - Detachable feeder (compatible with manual or vacuum feeding) Lhodpfswrrfcex Apmsi - Remote diagnostics and updates via integrated VPN connection _____ Optional functions and upgrades: - Gluing system - synchronized cold glue application device - miniFLEXO - compact single-color flexo printer - Flexomat - full-format flexo printer - Vacuum feed system - compensates for sheet curvature - 3D scanner - automatic product scanning and data entry - Automatic box folding system - Fully automatic production line _____ Technical data: - Power supply: 3 x 380/415/480 V - Installed power: 8.5 kW - Production efficiency: Up to 500 boxes per hour - Maximum box size: 2400 mm (94") width x 9999 mm (394") length - Minimum box size: 250 mm (10") width x 750 mm (30") - Slot width: ~7-8 mm (~5/16") - Machine footprint (L x W x H): ~3600 x 1900 x 1750 mm - Machine weight: ~3800 kg (7900 lbs) For further information, contact us, we are happy to help you

Condition: new, Technical data: Max saw blade diameter: 350 mm Min saw blade diameter: 250 mm Saw spindle diameter: 30 mm Scoring tool diameter: 120 mm Scoring tool spindle diameter: 20 mm Undercutter on a separate engine Tilting saw from 0° to 45° Manual adjustment of the angle of inclination of the saw blade Electric height adjustment of the saw Trolley length: 3200 mm Cart lock Eccentric clamp Table extensions Table height: 875 mm Culag: 120mm Ruler 3170 mm long with 2 stops Extraction port diameter: 125 mm Cover Safety switch Power: 400V Total power: 6.5 kW Lsdpfx Asmiii Sjpmjhi Machine dimensions Length: 3450mm Width: 3500mm Height: 1300mm

Year of construction: 2008, condition: ready for operation (used), A packaging cutting and creasing machine for Solarco corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, cardboard thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Lhodpfx Aswgc Ahopmei