Trimming saw

C M L J 350 RT CE

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Kdedpfx Adeug Ty Hsqjr Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight:

Condition: new, Year of construction: 2026, For professional and precise glue supply in dowel holes and back side grooves. Kjdpedxz Tpefx Adqodr Short introduction: • Always the same and right glue amount • No afterwards cleaning of the workpieces of too much glue is necessary • Easiest and minimal cleaning (1x week) of the gluing system (through cleaning program) • Glue cost savings • Ergonomic and light glue gun compared to squeezy glue bottles • Faster and more precise working compared to squeezy glue bottles

Condition: excellent (used), Weinig four-sided planer max planing width 230mm Kdodpfx Asrigxyedqer max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Kdjdpfx Adoi E Trpoqer

Condition: used, Complete pellet production line with a maximum capacity of up to 5 tons per hour (limited by dryer capacity). Pellet Presses (3 units): CPM 7122 CPM 7922-2 CPM 7930-4 (only ~200 working hours) Hammer Mills (3 units): Maier hammer mill for wet material Maier hammer mill for dry material Kamas hammer mill (for burner material production) Cooling System: CPM pellet cooler Additional Information: Electrical and control systems are fully integrated into container units Production line has been in operation for approximately 2 years Belt conveyor, reception hopper 4 kW Dryer: distributor reception hopper 2,2 kW Conveyor belt, reception hopper 2,2 kW Worm conveyor for drum dryer 2,2 kW Drum dryer 7,5 kW Main cyclone 90 kW Sluice head cyclone 7,5 kW Fan cyclone 18,5 kW 1 Sluice cyclone 1 2,2 kW Sluice cyclone 2 0,55 kW Sluice cyclone 3 0,55 kW Worm conveyor for cyclones 1-3 3 kW Hammer mill – Maier 160 kW Hammar mill for dust burner – Kamas 110 kW Hammar mill for woodchips – Maier 132 kW Worm screw for elevator 4 kW Elevator for buffer pocket 7,5 kW Buffer pocket high/low 8/4,5 kW Scraper conveyor for the presses 2,2 kW Worm screw for dust mill 2,2 kW Press 1 CPM: Model: 7122 Main engine 160 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Grease lubrication 0,18 kW Press 2 CPM: Model: 7922-2 Main engine 250 kW 200 kW Cascade mixer 7,5 kW Feeding screw, frequency converted 2,2 kW Oil lubrication 1,5 kW Feeding screw 4 kW Press 3 CPM: Model: 7930-4 Work only 200 hours Main engine 250 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Oil cooler 2,2 kW Grease lubrication 0,18 kW Conveyor for warm pellets 2,2 kW Belt conveyor to the refrigerator 2,2 kW Pellet refrigerator, outflow 1,5 kW Fan for the pellet refrigerator 11 kW Fan for the suction 5,5 kW Elevator 2,2 kW Belt conveyor 1,5 kW Belt conveyor 4 kW Combustion air fan 45 kW Conveyor fan 22 kW Conveyor fan 11 kW Silo filter 0,04 kW Kjdpfx Aoyvz Afedqsdr Filter fan 4 kW Screw for dust silo 2,2 kW Driving motor for dust silo 1,1 kW Oil pump 1,5 kW Dosing screw 0,75 kW Sluice feeder 0,37 kW

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed Kdsdpfx Adequp Aneqsr - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour Ksdpfxoqpdkce Adqedr

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg Kdodsh Nvyzjpfx Adqer

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm Kdodpfoychqzsx Adqer 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination * Kdedpfx Aeu Idbyjdqjr