Radial Drilling Machine

BERNARDO RD 1600x50

Condition: ready for operation (used), functionality: fully functional, HURON NU-4 is equipped with several buttons, switches and levers to control its operations. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm Phedpfx Ajriulgea Eja spindle/table distance: 9-509 mm spindle head - swivelling: 360°. spindle taper: SK 40 Meziv spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 PS(HP) weight of the machine approx.: 3.1 t dimensions of the machine approx.: 2.36 x 1.65 x 1.45 m (w x h x d)

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Phodpsrz Tutjfx Aa Eoa Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: like new (used), Year of construction: 2024, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg load capacity welding positioner, CE certificate. Very robust design. Infinitely variable speed from 0.05 to 0.7 rpm, higher speed available on request. Turntable diameter 1200 mm. Tilting up to 120°. Height horizontal 950 mm, tilted to center 720 mm. Hand and foot remote control. Dimensions: length 1.35 m x width 1.2 m. Podsd A Etuopfx Aa Eoha

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Phjdpowhp N Dofx Aa Eoa

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Complete with segmented and straight tools Podpfx Aaen Tnzfj Ejha

Condition: like new (used), Year of construction: 2022, 600 Kg load capacity welding rotary table adjustable in height with through hole 100 - 200mm plate diameter 700mm height horizontal min. 0,65m, max. 1,25m height tilted min. 0,45m, max. 0,95m speed from 0,01 - 1,1 rpm Phjdpfx Ajd Anz Rea Eoa Tilt up to 135 hand and foot remote control with speed indicator very robust

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Psdpou A Dgrefx Aa Eoha Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t Psdpfx Astv Ikloa Eoha dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 44,509 h, laser hours: 28,133 h, laser power: 4,000 W, Standard Equipment Machine • Closed machine frame • Integrated cabinet • Torque drive in combination with linear direct drives • Closed beam guidance via laser light cable (LLK) • Cooling unit • Integrated switch cabinets with interior lighting • Automatic longitudinal pallet changer • 17" touch color screen • Longitudinal conveyor belt • Workspace lighting • Positioning laser diode • Spraying device • PierceLine • FocusLine • NitroLine • PlasmaLine • Microweld • Automatic nozzle cleaning TRUMPF Laser • Integrated solid-state laser TruDisk 4001 with 1 LLK output • Excitation via pump diodes • Laser power control Cutting head • Universal cutting unit • Cutting head strategy • Protective glass against lens contamination • Condition check of the protective glass • ControlLine: height control and sheet metal edge detection Control system • SINUMERIK 840D SL control • Simple workshop programming • Fast reproduction • Integrated technology data • Automatic shutdown • Programmable cutting gas pressure • Multi-sheet processing • FastLine • FlyLine • AdjustLine Data transmission • USB interface • RJ-45 network connection • Wireless Operation Point (basis for Visual Online Support) Safety • CE marking • Light barriers • Multi-chamber extraction system • Compact dust removal system • Machine enclosure, certified viewing window, right door • Sliding roof Extended equipment • Nozzle changer Phjdpfx Aewrplyoa Esa • Wide transverse conveyor belt • Left sliding viewing door • Liftmaster • Loading station • Sheet separation of thin metal (s=0.8-2.0mm) • Construction steel rake (prong spacing 33.5mm) • Third position • Swivel range 180° The Liftmaster is included in the offer The machine can be inspected under production conditions Price ex works Supplier PeterHoppe GmbH 32832 Augustdorf

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is an AMADA AE-2510 NT turret punch press from 2017. The machine is in very good condition, fully functional, and has been in continuous production and regularly serviced. This is an advanced machine for precise sheet metal processing, ensuring high quality and work efficiency. Technical Data and Features: Model: AMADA AE-2510 NT Year of Manufacture: 2017 Control: Easy-to-use AMNC controller with integrated software. Drive: Energy-efficient servo-electric drive, lowering operational costs. Precision: High processing precision due to a variable drive. Tooling: Fast tool changes (approximately 1.5 seconds on average). Phedpewp Ul Hefx Aa Eoa 51 tool stations. 4 AMADEX stations for automatic tool rotation at any angle. The turret rotates the shortest path for minimal tool change times. Minimizes setup time. Capable of using special tools, such as slitting tools. Construction: Robust, closed frame to minimize deformation under heavy loads, ensuring high accuracy, reduced vibrations, and extended tool life. Noise and Vibration Level: Reduced due to new servo drives. Machine Condition: Used, in very good condition, fully functional. It has been in continuous production and regularly serviced. Location: Ożarów Mazowiecki, Poland Additional Information: The offer does not include disassembly, delivery, or tools.