Injection molding machine

ARBURG

Condition: excellent (used), Year of construction: 2010, clamping force: 600 kN, Equipment: documentation/manual, ARBURG ALLROUNDER 370 S 600-170 Year: 2010 CLAMPING UNIT Clamping force: 600 kN / 60 t Distance between tie bars H: 370 mm Distance between tie bars V: 370 mm Mould platen dimensions: 510 × 510 mm* Mould opening stroke: 400 mm* Bledpfx Afozn I H Esmop Minimum mould height: 200 mm* Maximum daylight: 600 mm* Maximum movable mould weight: 360 kg* Ejector force: 30 kN* Ejector stroke: 125 mm* INJECTION UNIT Injection unit: 170 (model designation) Screw diameter: 20 mm Shot volume: To be confirmed Shot weight (PS): To be confirmed Injection pressure: To be confirmed Screw stroke: To be confirmed Screw L/D ratio: To be confirmed HYDRAULIC SYSTEM Drive: Hydraulic Hydraulic core pullers: 1× CONTROL & EQUIPMENT Hot runner zones: 6× Robot interface: NO GENERAL INFORMATION Machine type: Horizontal Operating hours: 60,700 h Year of manufacture: 2010

Condition: ready for operation (used), Year of construction: 2019, operating hours: 300 h, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. Blsdpfx Aszvm Azsfmjp - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg

Condition: used, Year of construction: 2006, Arburg 370 U 600-290 (2006) CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Blodpfx Afo Ahpmmjmop Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: used, Year of construction: 2017, overall weight: 8,850 kg, Model 570 A 2000-400 Year of manufacture: 03/2017 Net weight according to the technical data sheet for the basic configuration: 8,850 kg with the following peripherals: - KUKA robot KR 16-2, year of manufacture 2017, with control panel - KUKA robot KR 10 R1100 sixx, year of manufacture 2017, with control panel - FARRAGTECH Card 40S compressed air granulator dryer Bljdpfxs Ahkh Aj Afmop - NZME temperature control unit station - Conveyor belt - Machine stairs - Machine documentation as shown - Enclosure as shown, without any further accessories or items depicted in the background, not tested for function or completeness This ARBURG 570 A 2000-400 injection molding machine will be auctioned online in our industrial auction / machine auction "Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks and various". You can find this and many other items from the areas of temperature control units, operational equipment and storage technology on our platform.

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Manufacturer: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Bledpfxjxvy Rlj Afmsp Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards. Key advantages of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.

Condition: used, Year of construction: 2014, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 250 mm, plate length: 570 mm, plate width: 570 mm, total length: 4,300 mm, total width: 1,700 mm, overall weight: 3,640 kg, Arburg 420C-1000-290 injection molding machine (261) with sorting flap Number: 261 Availability: in stock Year of production: 2014 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 35 Injection weight [g]: 132 Injection pressure [bar]: 2000 Closing force [kN]: 1000 Column spacing [mm]: 420 x 420 Plate size [mm]: Bsdpfx Ae Ahhfuofmslp 570×570 Min. mold height [mm]: 250 Control type: Selogica Tongue: English, German Installed power [kW]: 21.4 Working hours [h]: 59000(new pump 13000) Weight [kg]: 3640 Dimensions [mm]: 4300 x 1700 Feed hopper: NO Robot socket: Yes Core string: 1x Air valve: 1x Control of heating for molds: 3x

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, screw diameter: 90 mm, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A Bljdpfx Aeydnigjfmop

Condition: good (used), Year of construction: 2004, Peripheral devices Brand: Tool - Temp Type: TT - 157E Available: 14 pieces Bedpfsh Hbpwox Afmelp

Condition: used, Year of construction: 2006, Arburg 370U 600-290 (2006) 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Blodpfx Afs Ahgdqemop Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Blsdpfx Aj Ahx Rgjfmjp Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar Bedpfxjxz Ab Re Afmelp * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Bods Ahx N Rspfx Afmjlp Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2014, ARBURG A 370 S 700-290 U-Version (S&P 3804) Manufacture year: 2014 Operating hours: 41,257 Stunden Screw: 40 mm Injection pressure: 1530 bar Stroke volume: 188 cm³ Clamping Force: 70 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 600 mm Bljdpfx As Ahx D Nsfmep Dimensions: 3700 x 1400 x 2000 mm Eeight: 3580 kg Connected load: 15 kW U-Version = clamping and injectionside could be turned into vertical and horizontal position, 1 x corepuller, 6 x hotrunner, Airvalve, Interface colorizing, 23.761 h automatic and 17.496 h manual... Price: on request contact: Mr. Ralf Schulz

Condition: new, AVAILABLE FOR PURCHASE OR RENT Please read the technical specifications carefully. If the machine is a worthwhile investment for you, please provide your complete contact details, including a valid phone number and email address, so that we can prepare a quotation. Fiber Laser 30W Marking area: 200 x 200 mm Workpiece size max: WxHxD: 550 x 450 x 350 mm Laser type: Fiber 30 Watt Wavelength: 1064 mm Marking speed max. 7000 mm/sec Motorized Z-axis, height: 700 mm Bljdpfx Ajru E Svsfmjp Repeatability/lens: +/- 0.001 mm Line thickness min. approx. 0.01 mm Power supply: 240 V/50 Hz External dimensions: 110 x 80 x 200 cm Front door: manual Includes software and PC Can be inspected on-site while powered Price net, plus VAT

Condition: like new (used), Year of construction: 2006, Clamping force: 220 tons Opening stroke: 650 mm Mould height: 300 mm Clamping platen daylight: 950 mm Tie bar daylight: 570 x 570 mm Mould clamping plattens (b x h) : 795 x 795 mm Ejector stroke: 225 mm Screw diameter: 50 mm Screw stroke: 200 mm Injection volume: 392 cm3 Shot weight: 359 g Bledpfx Aozwlbfsfmop Injection pressure: 2000 bar Working hours: 10.444 Core pullers: 1x