320 M-750 -210

ARBURG

Condition: excellent (used), Year of construction: 2010, clamping force: 600 kN, Equipment: documentation/manual, ARBURG ALLROUNDER 370 S 600-170 Year: 2010 CLAMPING UNIT Clamping force: 600 kN / 60 t Distance between tie bars H: 370 mm Distance between tie bars V: 370 mm Mould platen dimensions: 510 × 510 mm* Mould opening stroke: 400 mm* Minimum mould height: 200 mm* Maximum daylight: 600 mm* Maximum movable mould weight: 360 kg* Ejector force: 30 kN* Ejector stroke: 125 mm* INJECTION UNIT Injection unit: 170 (model designation) Screw diameter: 20 mm Shot volume: To be confirmed Shot weight (PS): To be confirmed Injection pressure: To be confirmed Screw stroke: To be confirmed Screw L/D ratio: To be confirmed HYDRAULIC SYSTEM Drive: Hydraulic Hydraulic core pullers: 1× CONTROL & EQUIPMENT Hot runner zones: 6× Robot interface: NO GENERAL INFORMATION Machine type: Horizontal Operating hours: 60,700 h Bjdpfx Aozn I H Ejfmslp Year of manufacture: 2010

Condition: ready for operation (used), Selling a well-maintained Mikron VC 1000 milling machine due to the purchase of a new machine. Bljdpfsh Tnpxox Afmop

Condition: used, Year of construction: 2006, Arburg 370 U 600-290 (2006) CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Bedps Ahpmmofx Afmslp Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: used, Year of construction: 2017, overall weight: 8,850 kg, Model 570 A 2000-400 Year of manufacture: 03/2017 Net weight according to the technical data sheet for the basic configuration: 8,850 kg Blsdpfxo Ahkh As Afmop with the following peripherals: - KUKA robot KR 16-2, year of manufacture 2017, with control panel - KUKA robot KR 10 R1100 sixx, year of manufacture 2017, with control panel - FARRAGTECH Card 40S compressed air granulator dryer - NZME temperature control unit station - Conveyor belt - Machine stairs - Machine documentation as shown - Enclosure as shown, without any further accessories or items depicted in the background, not tested for function or completeness This ARBURG 570 A 2000-400 injection molding machine will be auctioned online in our industrial auction / machine auction "Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks and various". You can find this and many other items from the areas of temperature control units, operational equipment and storage technology on our platform.

Condition: used, Year of construction: 1965, x-travel 700 mm Bjdpfevzhh Tsx Afmelp y-travel 350 mm z-travel 450 mm table surface area 940 x 510 mm spindle taper SK 40 spindle turning speed range 32 - 1600 U/min feed - longitudinal/cross 8 - 400 mm/min feeds vertical 4 - 200 mm/min total power requirement 4,5 kW dimensions of machine L x W x H 1,85 x 1,62 x 1,83 m Accessories: vertical head with quill retraction, univ. table, counter bearing, coolant

Condition: used, Year of construction: 2014, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 250 mm, plate length: 570 mm, plate width: 570 mm, total length: 4,300 mm, total width: 1,700 mm, overall weight: 3,640 kg, Arburg 420C-1000-290 injection molding machine (261) with sorting flap Number: 261 Availability: in stock Year of production: 2014 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 35 Injection weight [g]: 132 Injection pressure [bar]: 2000 Closing force [kN]: 1000 Column spacing [mm]: 420 x 420 Plate size [mm]: 570×570 Min. mold height [mm]: 250 Blodj Ahhfuopfx Afmep Control type: Selogica Tongue: English, German Installed power [kW]: 21.4 Working hours [h]: 59000(new pump 13000) Weight [kg]: 3640 Dimensions [mm]: 4300 x 1700 Feed hopper: NO Robot socket: Yes Core string: 1x Air valve: 1x Control of heating for molds: 3x

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, screw diameter: 90 mm, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN Blodpfx Asydnigofmep • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Blodpfx Aepdr Aijfmep Mould height min 200 mm

Condition: used, Year of construction: 2006, Arburg 370U 600-290 (2006) 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Blsde Ahgdqepfx Afmsp Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: like new (used), Year of construction: 2006, Clamping force: 220 tons Opening stroke: 650 mm Bsdpfx Afjzwlbfemolp Mould height: 300 mm Clamping platen daylight: 950 mm Tie bar daylight: 570 x 570 mm Mould clamping plattens (b x h) : 795 x 795 mm Ejector stroke: 225 mm Screw diameter: 50 mm Screw stroke: 200 mm Injection volume: 392 cm3 Shot weight: 359 g Injection pressure: 2000 bar Working hours: 10.444 Core pullers: 1x

Condition: ready for operation (used), Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible. Bsdpfxeuyk Rls Afmelp

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Comprising the following components: Item 01) Injection molding tools for the capsule, Manufacturer: FOSTAG AG 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Item 02) Two-component injection molding machine, Manufacturer: ARBURG, Model: 720A3200-800, Year of manufacture: 2017 Bjdpfew Nriuex Afmelp The capsules are produced as free-falling parts.

Condition: excellent (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter und Drehteller Hersteller: ARBURG Typ: 470S1100-400/290 Baujahr: 2017 Schließkraft: 110 Tonnen Holmabstand 420 x 420 mm Einbauhöhe min. /max.: 450 mm Bsdpfju E E Suox Afmslp Öffnungsweg: 950 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Drehteller 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, clearance between the columns: 1,200 mm, displacement volume: 12,193 cm³, injection pressure: 1,500 bar, injection weight: 11,584 g, opening stroke: 1,400 mm, Used Stork IMM 12000-19000 injection molding machine. Bsdpfswhkfyex Afmolp

Condition: like new (used), Year of construction: 2022, operating hours: 8,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 570A2000-400/70 Baujahr: 2022 Schließkraft: 200 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht in PS: 141 g Schnecke DN 2: 25 mm Bsdovftnajpfx Afmjlp Max. Hubvolumen: 44 cm³ Spritzteilgewicht in PS: 40 g Steuerung: Selogica Technische Ausstattung anfordern.