270 S-250 -60

ARBURG

Condition: used, Year of construction: 2017, clamping force: 250 kN, displacement volume: 570 cm³, injection pressure: 2,470 bar, overall weight: 14,500 kg, load hours: 22,900 h, screw conveyor diameter: 55 mm, terms of delivery: FCA Pegnitz delivery time: on request Bledpsxv D Tkjfx Afnsc terms of payment: 100% prior to delivery

Year of construction: 2007, condition: used, Record Scorpion MEC. SP. Compact good condition flow packer. This machine has an in-feed belt that makes integration to an existing line much easier. Key features - New condition - Very compact compared to most other flowpackers, Only ±290 cm long, very easy to integrate. - Bottom seal Bsdpfemymi Tox Afnolc - Very easy to set-up and run Optionally with additional infeed device, photo's in the album.

Condition: excellent (used), Year of construction: 2007, Arburg 320C 500-100 (2007) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Blodpfju Dmgqsx Afnjc Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment Bledpfjyg I Ihox Afnec • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: excellent (used), Year of construction: 1993, Boy 50 T2 Traction force 50 tons Year 1993 Cutting blade 38 mm Bodpfx Afsuiaa Senjlc Injection weight 138 cm3

Condition: new, Year of construction: 2023, Clamping force: 320 t Screw diameter: 30 mm Bledpfx Afjyg I Emsnjc Shot weight: 97 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Shot volume: 106 cm3 Type: Multicomponent Drive: Hybrid

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators Bedsyg I Egopfx Afnelc • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Condition: good (used), 1x used Arburg 370U 500-170 Bsdpfxsxl Tzcj Afnelc With Multilift Immediately available!

Condition: new, Year of construction: 2023, Clamping force: 500 t Screw diameter: 60 mm Blsdpfx Aoyg I A Sofnec Shot weight: 620 g Distance between tie bars V: 920 mm Distance between tie bars H: 920 mm Shot volume: 678 cm3 Type: Multicomponent Drive: Hybrid Special multicomponent machine

Condition: excellent (used), Year of construction: 2004, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Blodpfx Afsuykh Donsc Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 25 mm Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Injection pressure: 1040 bar Working hours: 34.748

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 03-99-276, total height: 1,700 mm, total width: 1,000 mm, total length: 4,000 mm, overall weight: 810 kg, number of blades: 2, input voltage: 400 V, nominal power: 4 kW (5.44 HP), - color white - Year 1999 - Condition used - Buy as it is (no maintenance will be given by us) Supply Conveyor Track is about 2000mm long Simple machine but effective Blodpfx Afjwut Dfenjc Transport not included.

Condition: excellent (used), Year of construction: 2004, Arburg 520 TV 1300-350 (2004) Blodswp E E Rjpfx Afnoc Clamping Unit: 1. Clamping Force: 1,000 kN (100 tonnes) 2. Opening Force: 115 / 300 kN 3. Opening Stroke: 300 mm 4. Maximum Distance Between Platens: 600 mm 5. Minimum Mould Installation Height: 300 mm 6. Tie Bar Spacing: 1,300 mm 7. Maximum Weight of Movable Mould Half: 500 kg 8. Ejector Force: 45 / 175 kN 9. Ejector Stroke: 150 mm Injection Unit: Screw Diameter: 40 mm Injection Volume: 230 cm³ Injection Pressure: 1,670 bar

Condition: used, Year of construction: 2021, functionality: fully functional, clamping force: 2,500 kN, Arburg Allrounder 630A Multi Component Plastics Injection Moulding Machine (2021) Blsdpfx Afjygx Urenec Arburg Allrounder 630A 2500-800/400 L2, 2500kN clamp force multi-component plastics injection moulding machine (2021) including 800 horizontal injection unit and 400 vertical injection units

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,300 kN, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Blsdpsx D E Dyefx Afnoc Machine Benefits Technical Machine Benefits • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 290 unit: 30 / 35 / 40 mm 400 unit: 35 / 40 / 45 mm 800 unit: 45 / 50 / 55 mm Injection Pressure (Max.): 290: 2500 / 2000 / 1530 bar 400: 2500 / 2000 / 1580 bar 800: 2470 / 2000 / 1650 bar Shot Weight (Max. g PS): 290: 97 / 132 / 172 g 400: 141 / 184 / 232 g 800: 291 / 359 / 434 g Heating Output 290: 7.7 kW | 5 zones 400: 9.7 kW | 5 zones 800: 19.9 kW | 8 zones Net Machine Weight: 290: 5600 kg 400: 5900 kg 800: 6350 kg