ARBURG A 470 H (S&P 3796)

ARBURG A 470 H (S&P 3796)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, working width: 1,700 mm, welding power (max.): 600 kVA, wire diameter (max.): 6 mm, type of input current: three-phase, MG950 Mesh Width (Cross Wire Length) for lower feed, single-row: 200 – 900 mm for upper feed, single-row: 200 – 1700 mm for upper feed, double-row (usable width): max. 1530 mm Mesh Length: max. 3200 mm min. 350* mm Distance between the outermost longitudinal wires: max. 1600 mm Longitudinal wire pitch: min. 20 mm Cross wire pitch: min. 10 mm steplessly programmable Clear opening longitudinal wire: min. 15 mm Clear opening cross wire: min. 8 mm Longitudinal wire diameter: 2.0 – 6.0 mm Cross wire diameter: for lower feed: 1.5 – 4.0 mm for upper feed: 2.0 – 6.0 mm Longitudinal wire overhang: max. 300 mm, min. 10 mm Cross wire overhang: max. 300 mm, min. 5 mm Number of individual welding groups ESG: 12 Gjdpfxeym An Ae Aaxsbl Number of portal welding groups PSG18: 12 Max. number of longitudinal wires: 12

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator Gjdjtltvzspfx Aaxjbl - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.

Condition: new, WM6350F ROGI universal milling machine 400V-3Ph Drilling capacity in steel ----- 50 mm Milling capacity in steel ----- 25 mm Face milling capacity ----- 100 mm Horizontal motor ----- 2.2 KW Vertical motor ----- 2.2 KW Horizontal spindle speed range ----- 60 ~ 1350 rpm Vertical spindle speed range ----- 90 ~ 2000 rpm Spindle taper ----- ISO 40 Gbedpfxsga T Ars Aaxjl Table ----- 1270 x 320 mm Weight ----- 1500 KG INCLUDES * 3-axis digital readout SINO brand * Automatic worktable feed X,Y,Z * Automatic spindle feed * LED lighting * Coolant system * Premium control cabinet * Tilting milling head left/right 0 - 45 degrees * Swiveling worktable OPTION * Pneumatic drawbar

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 Gbedpfx Aaoyg Eu Sexjl extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: ready for operation (used), Year of construction: 2018, clamping force: 400 kN, screw diameter: 30 mm, injection weight: 79 g, Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details. Gbedpfxoy Nkwle Aaxel • Tie bar distance: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm • Vacuum pump capacity: approx. 25 m³/h • Pneumatic flow rate: 1,000 l/min per circuit • Heating capacity per control circuit: 3.6 kW / 230 V (16 A fuse) • Drive motor voltage: 380–480 V (50–60 Hz)

Condition: good (used), Year of construction: 1973, Deckel FP2 tool milling machine with 2-axis Heidenhain digital readout, rigid table, SK 40 spindle holder. Long sliding milling head, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Gbsdpfxoumclaj Aaxel

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories: various collets and arbor holders, counter support. Good, operational condition. Can be demonstrated under power by arrangement. Gbedpfxjxu Uvtj Aaxsl

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 202011019N, feed rate X-axis: 720 m/min, feed rate Y-axis: 720 m/min, feed rate Z-axis: 720 m/min, spindle speed (max.): 2,000 rpm, spindle speed (min.): 60 rpm, quill stroke: 120 mm, quill travel distance: 120 mm, table width: 320 mm, table length: 1,270 mm, position of the milling head: vertikal + horizontal, type of input current: three-phase, rotational speed (max.): 1,800 rpm, rotational speed (min.): 50 rpm, table load: 300 kg, overall weight: 2,200 kg, input voltage: 400 V, distance table to spindle center: 400 mm, input frequency: 50 Hz, Universal Milling Machine ROGI WM6350F in a robust and stable design for professional use in mechanical engineering, toolmaking, as well as in workshops and training facilities. The machine features a large working table measuring 1270 x 320 mm, allowing for precise machining of a wide variety of workpieces. With travel distances of approximately 800 mm on the X-axis, 300 mm on the Y-axis, and 400 mm on the Z-axis, the machine offers high flexibility in operation. Equipped with an ISO 40 spindle taper and a powerful spindle motor (approx. 3 kW), this milling machine is suitable for both light and medium-duty machining tasks. The spindle speed can be set within a range of 50 to 1800 rpm. The milling head can be used both vertically and horizontally, thus ensuring a wide range of machining capabilities. The rigid construction and substantial machine weight of approximately 2200 kg ensure low-vibration operation and high accuracy. Technical Highlights: - Table size: 1270 x 320 mm - Travel distances: X 800 mm / Y 300 mm / Z 400 mm - Spindle taper: ISO 40 - Spindle speed: 50 – 1800 rpm - Spindle motor power: approx. 3 kW Gbjdpfoyw N Ursx Aaxel - Quill stroke: approx. 120 mm - Total weight: approx. 2200 kg - Power supply: 400 V / 50 Hz / 3-phase The machine is in used, functional condition. Inspection and test run are possible by appointment.