Tool room milling machine

DECKEL FP2

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Cedpoylawxjfx Ac Tehb

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm Codpfx Aceu Et Nbo Tehb - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9585, DECKEL Universal Milling and Drilling Machine Codpfjygicaex Ac Tehb Model: FP 2 Machine No.: 9585 Year of manufacture: 1978/79 Condition: Good, operational condition Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm

Condition: ready for operation (used), machine/vehicle number: 46436, Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm Codpsygia Ejfx Ac Tshb Features: - Sliding vertical milling head - Tilting angle table 260 x 600 mm - Various tool holders - Setup elements - Rotary table D:280 mm - Documentation Condition: workshop-tested

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G Cjdsvc Amtepfx Ac Tehb back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: ready for operation (used), functionality: fully functional, DECKEL FP 2 E milling machine from an educational institution -Travel ranges X / Y / Z 400x200x400mm -Automatic feeds / rapid traverses in the X & Z axis -Spindle speed range 40 - 2000 rpm -Tool holder ISO 40 -Vertical / horizontal milling capability -Swiveling vertical head with drilling quill -Fixed angular table -Machine with sliding head / extended Y-axis travel -New control cabinet -Coolant system -Chip tray -Documentation -Optional / Three-axis digital display Dimensions: L x W x H 1.5 x 1.5 x 1.8 meters / Weight 1500 kg Csdpfx Acezx Rk Io Tohb Errors and omissions excepted.

Condition: good (used), Year of construction: 1964, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 40 rpm, input frequency: 50 Hz, The machine is in good condition! Tool holder: SK 40 Travel ranges X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feeds: 8 - 400 mm/min Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Space requirements L x W x H, approx.: 1200 x 1250 x 1670 mm Head swivels: 90° / 90° Equipment: - 3-axis digital display - Coolant system We would be happy to demonstrate the machine to you on site while it is running. All information is subject to change without notice. Subject to prior sale. Cjdpjilg H Eefx Ac Tshb The item is sold as is, with no warranty of any kind. This exclusion does not apply to claims for damages resulting from gross negligence or willful breach of the seller's obligations, or to any injury to life, limb, or health.

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind cutting angle adjustment Codpjv Syyvjfx Ac Tehb Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, centre height // mm Cjdpfezcgfqjx Ac Tshb total power requirement / kW weight of the machine ca. / t required space / m Parts machine for lids FP1 / FP2 Condition: NEW

Condition: used, power capacity / kW volt / V Chsdpfey S Eb Rox Ac Teb ampere / A DECKEL MONITOR Bildschirm DIALOG FP2 / FP3

Condition: used, Cutting length: 3100 mm Cjdpfexuh Ipjx Ac Tohb Steel cutting capacity: 12 mm Backgauge: 1000 mm

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Csdpfxjwid Spj Ac Tjhb Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: ready for operation (used), Tool milling machine DECKEL FP 2 LB incl. 3-axis digital control (ACU-RITE) -Travel ranges X/Y/Z 795x300x400mm -Automatic longitudinal / transverse / planar feeds -Rapid traverse in all three axes -Spindle speeds 40 - 2000 rpm -Table clamping area 1000x440mm -Tilting table -Digital display, 3-axis (ACU-RITE) -Vertical - horizontal milling attachment -Vertical head with drilling quill -Tool holder ISO 40 Chjdjzu Nhwspfx Ac Tsb -Coolant system -Machine lamp -Various tool holders -Machine documentation Dimensions: L x W x H 2.5 x 2.3 x 1.8 meters / Weight 2200 kg Errors and omissions excepted.

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty Cjdpfx Aewnn S Rsc Tehb New paint RAL 7035/7031

Condition: refurbished (used), Year of construction: 1968, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill travel distance: 80 mm, total length: 1,000 mm, table width: 520 mm, table length: 1,000 mm, table load: 2,000 kg, overall weight: 2,500 kg, input voltage: 400 V, workpiece weight (max.): 2,000 kg, We are offering this refurbished DECKEL FP2LB milling machine, year of manufacture 1968. Manufacturer: DECKEL Model: FP2LB Year of manufacture: 1968 Condition: refurbished Machine type: milling machine Codpfox Sdxzsx Ac Tjhb If you have any questions or need further information, please feel free to send us a message or give us a call.