Welding set

Alpha Laser ALM300

Year of construction: 2019, operating hours: 380 h, condition: ready for operation (used), overall weight: 300 kg, total width: 730 mm, total height: 1,585 mm, laser power: 300 W, This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details. • Laser type / wavelength: Nd:YAG, 1,064 nm • Operating mode: Pulsed • Average power: 300 W • Peak pulse power: 9 kW • Pulse energy: 90 J • Pulse duration: 0.5–20 ms • Pulse frequency: Single pulse up to 100 Hz Lasdpfx Abszf A Ifsyoh • Welding spot diameter: 0.2–2.0 mm • Focusing objective: 150 mm (further lenses per lens data sheet) • Work area / axes: • Movement speed (X/Y/Z): 0–25 mm/s • Movement range (X/Y/Z): 120 × 110 × 800 mm • Lowest working point: 530 mm • Highest working point: 1590 mm • Arm deflection: 1300 mm • Observation lens / ergonomics: Microscope attachment with eyepieces for glasses wearers 10× • Electrical connection: 3 × 400 V / 50–60 Hz / 3 × 16 A • Condition: Demo/showroom use only; excellent technical and visual condition

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3379284, General Data Measurements width 1,650 mm Measurements depth 2,234 mm Measurements height 2,580mm Machine weight 3,600 kg Control System: Simens 840D solutionline Movement X-Axis Movement 700 mm Y-Axis Movement 400 mm Z-Axis Movement 485 mm Workpiece Workpiece weight 400 kg Lajdpfx Abjudy Huoyeh Table Outer length 840 mm Outer width 420 mm IPG Laser 100W

Condition: used, Year of construction: 2021, Technical details: traction force: 1600 N (Zuglast: 3000 kg) N Number of working hours: ca. 5 h Tare weight: 300 kg dimensions LxWxH: 1,6 x 0,7 x 1,3 m Electric tow tractor - Tractor Anwendung z.B. ziehen von Wagen, Containern etc. bis zu einer Last von 3000 kg Traction drive: Electric 2x battery type PB, nominal capacity 96 Ah Travel speed with/without rated load: Climbing ability with load up to 15% 24 V Motor type MRP9D Pneumatic tires Wheels swivel at the front Ledpfju Nwigsx Abyoah Operation via drive control drawbar with 2 manual switches and control panel (EMERGENCY button) Coupling with coupling pin Ø 35x200mm Accessories: 220V high-frequency charger Operating instructions Condition: as is, hardly used as is. *

Year of construction: 2006, condition: excellent (used), Capacity over bed Ø 400 mm, travel X/Y/Z 170/50/505 mm, tools Q-axis 360°, 2 + 1 tools, spindle 7 KW, 10 – 4000 rpm, bore Ø 42 mm, control SIEMENS 840D, chip cylinder vacuum cleaner, minimum lubrication system, pneumatic hollow fixing device, 2-jaws and 3-jaws chuck Ø 160 mm, manuals, etc Ljdpfx Abjimbl Ujyoah

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 3,050 mm, table width: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, skyCUBE XL class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XL class, manufactured by PFEIFER technology in Saxony, Germany, has been designed for your professional cutting applications. It combines a new level of productivity with cost-effectiveness and precision. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, offering you the highest level of safety. The ergonomic design with a pull-out worktable makes machine loading easier. Drawers in the lower section of the machine collect cutting waste. Ljdet A N A Rjpfx Abyeah Optimize quality and cutting speed even with thick materials thanks to 6kW laser power—even when cutting with compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Naturally, you’re always on the safe side when operating the skyCUBE laser! The skyTUBE Pro is a Class 1 laser system. There is no risk of exposure to laser beam emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass and a perfectly shielded cutting area reliably protect you from the hazards of laser radiation, while an independent safety system allows loading without interrupting production. Select the laser power best suited to your needs; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a brand-new laser machine manufactured by us) Maximum dimensions (L×W×H): 2310×8505×2505 mm / Laser machine 4.0 T Power supply depending on laser source (6kW) 400V/50Hz 3 phase / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on material and process Laser processing made easy and highly precise – high-speed, high-quality laser cutting

Year of construction: 2017, condition: ready for operation (used), ALPHA LASER ALFlak300 M was manufactured in 2017. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The machine offers a movement range of 340 x 320 x 420 mm and a maximum movement speed of 25 mm/s. If you are looking to get high-quality welding capabilities, consider the ALPHA LASER ALFlak300 M machine we have for sale. Contact us for further details. Ljdez Nfwpjpfx Abyeah - Laser Type / Wavelength: Nd:YAG, 1064 nm- Average Power: 300 W- Peak Pulse Power: 9 kW- Pulse Energy: 90 J- Pulse Duration: 0.5 – 20 ms- Pulse Frequency: Single pulse – 100 Hz- Operating Mode: Pulsed- Welding Spot Diameter: 0.2 – 2.0 mm (0.05 – 0.5 mm with micro welding option)- Focusing Objective: 150 mm- Movement Speed (X, Y, Z): 0 – 25 mm/s- Movement Range (X, Y, Z): 340 x 320 x 420 mm- Arm Deflection: 1500 mm- Lowest / Highest Working Point: 200 mm / 1500 mm- Observation Optics: Leica microscope attachment with eyepieces (10x magnification)- Dimensions (W x D x H): 1200 x 1200 x 1100 mm- Weight: Approx. 550 kg (manual base / chassis)- Electrical Connection: 3 x 400 V / 50–60 Hz / 3 x 16 A

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Laodpfx Aez Eu Syebyjh Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Pulse frequency 0-100 Hz Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Equipment: Ergokeil 5°-25° Ergonomic wedge for microscope Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Tiltable for horizontal to vertical rotation.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 9,975 h, machine/vehicle number: 00110813-06.17, control type: CNC control, actuation type: electric, controller manufacturer: Schneider Electric, controller model: Magelis, laser type: fiber laser, laser source manufacturer: IPG, laser hours: 9,975 h, laser power: 450 W, laser wavelength: 1,050 nm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, working length: 500 mm, working width: 500 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, input voltage: 1,200 V, input current: 30 A, type of cooling: air, total length: 1,180 mm, total width: 1,343 mm, total height: 1,341 mm, Equipment: CE marking, documentation/manual, emergency stop, We are offering this used ALPHALASER AC 450 F laser cutting machine, manufactured in 2017, for sale. Manufacturer: ALPHALASER Ljdjz Ahzfopfx Abysah Model: AC 450 F Year of manufacture: 2017 Laser operating hours: 9975 hours without dust extraction system If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2021, operating hours: 3,006 h, functionality: fully functional, machine/vehicle number: 00161215-02.18, type of input current: three-phase, total height: 1,150 mm, total width: 1,200 mm, total length: 1,030 mm, input voltage: 400 V, overall weight: 910 kg, type of cooling: water, electrical fuse: 16 A, laser power: 900 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, travel distance X-axis: 320 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 370 mm, Equipment: head guard, We are selling a laser welding machine in excellent condition. Lajdpfxezw Eu Sj Abyoh

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,802 h, functionality: fully functional, machine/vehicle number: 12230000107, spindle speed (max.): 10,000 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl, laser power: 100 W, Highly accurate 5-axis milling, laser texturing, and laser paint removal on a precision machine! TECHNICAL DETAILS Ledozcxwrspfx Abyoah Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 560 mm Main spindle speed range: 20 - 10,000 rpm Main spindle drive power: 13 / 9 kW Torque: max. 83 / 57 Nm Tool holder: HSK A63 according to DIN 69893 Table clamping surface: 800 x 650 mm Table load capacity: max. 600 kg Swivel range B-axis: ± 120° Rotational range C-axis: 360° T-slots: 9 x 14 x 63 mm Workpiece dimensions: max. 650 (840) x 500 mm Number of tool positions: 30 Tool weight: max. 6 kg Tool diameter: max. 80 mm Tool diameter with free neighboring pocket: max. 160 mm Tool length: max. 315 mm Tool change time (tool to tool): 1.6 s Tool change time (chip to chip): 8.0 s Rapid traverse: 40 m/min Feed force: 7 / 13 / 10 kN Feed rate: 1 - 40,000 mm/min MACHINE DETAILS Control system: Siemens 840D sl Axes: 5 Total power consumption: 24 kVA Dimensions & Weight Footprint: approx. 4.5 x 3.5 x 2.3 m Machine weight: approx. 11.5 t Operating hours milling machine Spindle hours (according to counter): 4,738 h Power-on hours (according to counter): 18,703 h Operating hours laser Spindle hours (according to counter): 2,802 h Power-on hours (according to counter): 6,177 h EQUIPMENT Swiveling rotary table Laser head 100 W Coolant system Electronic handwheel Documentation