Clean air suction with briquetting press

AL-KO Power Unit 250 P - BP

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. Intermediate Lacquer Sanding Configuration Special price for exhibition machine - showroom model - - Robust, space-saving wide belt sander for the highest standards - Constant working height due to upper part adjustment - Working width: 1350 mm - Overhead sanding, with 2 sanding units - Serrated rubber contact roller in proven hardness - Infinitely variable height adjustment of the contact roller according to grit scale - Electric lifting/lowering of the contact roller depending on unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10° - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized precision height adjustment with digital readout - Belt tension, control, and oscillation pneumatically operated Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation of 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece over-thickness protection with instant feed stop and lift-off automation - Stepless adjustment of material removal - Electronic feed control on operator panel, infinitely variable 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated quick setup and feed activation - Eco energy saving mode - Error diagnostics - Pass-through height 210 mm up to 18.5 kW - Sanding belt size 1350 x 2000 mm Perfect - Features: High-quality swiveling Plexiglas control panel - 10'' touch screen - Industrial control system - Automatic pressure regulation and storage of sanding pad elements - Electronic compensation for sanding belt grit size - Job and operating hours counter Lacquer Equipment: - Infinitely variable sanding belt speed on 2nd unit - Cleaning nozzles for the sanding belt of the 2nd unit, controlled by use - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air blow-off with fan Rbsdpfx Aek Dpp Sjcvsw Location: 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm Rodpsu Afu Refx Acvjbw 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Blade revolutions per (min) 5300 Rbjdpfx Asu Rqq Hocvsw Automatic pneumatic movable table Galvanized iron and polyzene supports √ Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator -lateral destacking unit -separation Rodpfxsvbtpo Acvebw -4 cross cut saws -cutting cross section 180x220 mm, 150x300 mm

Condition: excellent (used), HA 4 surface planer planing width 450 mm total table length 2500 mm Feed table 1500 mm Machine height 820 mm Rbodpfx Acoinkfnjvow Max. Chip thickness 15 mm Cutter shaft revolutions 4800 rpm Motor power 4 HP Weight 660 kg 3-piece cutterhead

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0 278 06 1192, film width: 700 mm, roll diameter: 700 mm, Used Friz rotary cutter. 1 set of blades has been resharpened. The machine is used and is sold without warranty. Redpov Radxofx Acvobw Inspection is possible and welcome. Loading facilities available.

Condition: used, Year of construction: 2017, operating hours: 854 h, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Empty weight: 800 kg Price: On request - Year: 2017 - Documentation available: No - CE marking present: Yes Rbedpfx Aexan Utecvow - CE certificate present: No - Serial number: 5037411-000150 - Operating hours: 854 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization Rbedpfev Si Szex Acvow 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Rodpju R Sxxjfx Acvsbw Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Three-spindle underfloor milling machine from RUWI Professional equipment for the workshop This underfloor milling machine enables simple chamfering, rounding, profiling, grooving, grinding and various other milling tasks to achieve the desired result quickly. Quick tool changes are possible thanks to the handy tool store. Set-up times are increasingly eliminated with the larger models. Costly and time-consuming fine adjustments and trial milling, equipped with all important tools, are no longer necessary. The spindle can be infinitely adjusted to the correct working position. This model is ideal for use in the workshop and is often used for final processing. Made in Germany. Features and technical data: - High-quality workmanship - 3 tools on call - Control electronics prevent speed fluctuations under load - Robust and heavy-duty motor - Motor with overload protection - Temperature monitoring with PTC resistor. - Soft start and starting current limitation - The counter-rotating return thread above the ball bearings prevents the ingress of dust and dirt - Quick tool change - Dust extraction above and below the table plate - 1x fine adjustment - Incl. stop ruler - Incl. fastening set for table extension - Convenient tool change from above - BG and wood dust tested Technical data: - Table size: 640 x 500 - Table height: 910 mm - Infinitely variable speed control: 8000 - 25000 rpm - Tools on call: 3 - Milling stroke: 43 mm - Motor power: 1050 watts for continuous industrial use - Voltage: 230 V - Milling spindle: 22 mm diameter - Collets: 8 mm (standard) optionally also 6 mm, 6.35 mm and 10 mm - Suction connection: 120 mm Rodpfxjrk Tqko Acvjbw - Mobility: 4 swivel castors - Weight: 91 kg Availability: short term Location: Solingen