Condition: used, Year of construction: 1990, functionality: fully functional, input voltage: 380 V, overall weight: 1,100 kg, warranty duration: 2 months, welding power (max.): 149 kVA, total width: 750 mm, open-circuit voltage: 7 V, air pressure: 5.5 bar, working range: 220 mm, Equipment: documentation/manual, type plate available, We are offering this used Schlatter P 3.372.53.32 spot welding machine, year of manufacture 1990. Input voltage U1: 380 V Short-circuit power Sc: 160 kVA Reactance X: 50% Mains frequency f1: 50 Hz No-load voltage U20: 7.1 V Secondary voltage U2: 5.0 V Welding current I2c: 22.6 kA Welding current I2cc: 28 kA Primary current I1: 300 A Secondary current I2: 640 A Maximum apparent power Smax: 149 kVA Coolant flow rate p: 14 - 22 l/min Distance e: 220 mm Dimension A: 480 mm Rsdpfx Aoyhgvtea Uop Dimension B: 750 mm Maximum force Fmax: 30.0 kN Operating pressure p: 5.5 bar Coolant pressure Pa: 3 - 4 bar Must be collected with an appropriate vehicle. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: reconditioned (used), Year of construction: 1987, punching force: 25 t, power of the servo motor: 17,000 W, input voltage: 400 V, type of input current: three-phase, Bihler Mach 05 base machine (refurbished) - without control cabinet and electrical system - drive with new flywheel and Ortlinghaus clutch - new Siemens servo motor (1PH8137-1HD10-0BA1) - material feed - 5 slides - 25-ton press - central punch drive - central lubrication Redpsyhp E Dsfx Aa Uop - newly painted (RAL6011)

Condition: used, Year of construction: 1976, wire diameter: 3,0 - 5,5 mm Redpfx Aaekk Exe Uep nail length: 15 - 80 (100) mm output: 300 St./min.

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm cutting length: 5 - 70 mm output: 400/min. Rsdpfx Aas Syv Ts Ujp complete with ciller and motorized decoiler

Condition: used, functionality: fully functional, machine/vehicle number: D12L/8373, Offer Number: D12L/8373 Machinetype: wire nail press Make: WAFIOS Type: S110 Rsdpfowi Ubnex Aa Usp Constr. year: approx1970 diameter range: 2,2-3,8 mm nail length: 13-110 mm output - pieces/min: 350 Location: In our warehouse

Condition: good (used), Year of construction: 1990, loading capacity: 2.000 Kg. diameter of decoiler: 1.400 mm outside diameter of coil: max. 1.300 mm inside diameter of coil: min. 400 mm hight of the coil: max. 800 mm Rsdpfx Aoid Sgmsa Uop

Condition: excellent (used), functionality: fully functional, Year of construction: 1984, Loading capacity: max. 300 Kg. Diameter of decoiler: 1.000 mm Diameter of spool: max. 900 mm Inside diam of spool: 240 - 560 mm Rsdpfof S I I Hsx Aa Ujp Hight of spool: max. 180 mm

Condition: excellent (used), Year of construction: 1984, Equipped with: 1 Grip feeding system right hand side 3 Press units á 180 kN = Total 540 kN 4 Standrad slide units 1 Narrow slide unit working range: wire diameter range: up to 10,0 mm strip metal width: up to 100 mm feeding length: up to 250 mm Rodpfx Aema S Nrja Usp output: up 135/min.

Condition: good (used), Year of construction: 1981, wire diameter range: 1,0 - 5,0 mm Rodpfx Asb Hqz Usa Uop ring diameter range: 100 - 600 mm wire feeding length: max. 2.000 mm output: 10 - 120 pcs./min.

Condition: excellent (used), Year of construction: 1985, wire rod diameter range: 3,0 - 10,0 mm wire rod length: 100 - 1.000 mm Redpfew Euz Tjx Aa Uep output: 60 - 120 rods per minute *complete with tools for wire diam. 3,5 - 4,0 - 5,0 - 6,0 - 8,0 mm*

Condition: excellent (used), Year of construction: 1968, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 2 Narrow slide units 4 Standard slide units Rjdol D N Hvepfx Aa Uep Working range: wire diameter range: 0,5 - 3,5 mm strip metal width: max. 32 mm feeding length: max. 170 mm output: max 250/min

Condition: excellent (used), Year of construction: 1977, equipped with: 1 pce. BIHLER auccustic cabine 1 pce. gripper feeder system right hand side 1 pce. Eccentricpress 70 kN 3 pcs. Standard slide units Redpfx Aofzr Aqea Uop 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: good (used), Year of construction: 1976, wire diameter range: a) single wire: 2,2 - 3,8 mm b) double wire: 2,2 - 3,4 mm nail length: 10 - 80 mm Redpjd Im Nujfx Aa Uop output: 300/600 nails/min.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units 2 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min Rodorwnyvspfx Aa Uep

Condition: excellent (used), Year of construction: 1983, equipped with: 1 Feeding system right hand side 1 Eccentricpress 250 kN 5 Slide units Rodpsvuzvdsfx Aa Usp working range: wire diamter range: 1,5 - 5,0 mm stripmetal width: max. 50 mm feeding length: max. 200 mm output: max 450/min.

Year of construction: 1972, condition: good (used), working width: max. 1.700 mm Rodjg Ryvwepfx Aa Uop number of length wires: max. 16 wire diameter length wires; 2,5 - 3,25 mm wire diameter edge wires: max. 3,25 mm wire diameter knot wires: max 3,2 5mm

Condition: excellent (used), Year of construction: 2012, loading capacity: max. 1.500 Kg. wire diameter range: 0,5 - 9,0 mm Rjdpfxevam Iis Aa Ujp coil outside diam. max. 1.000 mm coil inside diam. min. 300 Kg. speed: 0 - 80 U/min

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: Rjden E N Ndopfx Aa Usp wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, *complete with SKAKOTROL control-unit C 400* volume: 700 Kg. Rsdpfx Aowhqkcja Uop loading capacity: max. 500 Kg.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units 2 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm Rsdpfetzlzaex Aa Uop stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. gripper feeder system left hand side 1 pce. Eccentricpress 70 kN 1 pce. Campress 3 pcs. Standard slide units 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm Rsdorpk Axspfx Aa Ujp strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: ready for operation (used), Year of construction: 1979, welding capacity: max. 70 kVA Rodpfxedzudze Aa Usp

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, wire diameter range: 1,5 - 7,0 mm cutting length: max. 2.000 mm wire feeding speed: 5 - 120 mtr./min Rjdpfx Aaec Ucxfo Ujp * machine is been complete new painted*

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Gripper feeding system right hand side 1 Eccentricpress 90 kN 2 Narrow-slide-units 3 Standard-slide-units Working range: Wire diameter range: 0,5 - 3,5 mm Stripmetal width: max. 32 mm Rsdpfjpq H Upjx Aa Usp Feeding length: max. 170 mm Output: max. 250/min.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Rjdpfxetmty Ns Aa Ujp Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min