Nail Making Machine

MORONI SPND 80

Condition: good (used), The Bystronic glass cutting line for split band dimensions Pgsdet Et Icepfx Akiju (Maximum 3300 x 2550 mm) Service/spare parts are provided by Hegla, who purchased Bystronic. 1 Bystronic KTR tilting table, Serial No. E9801016-1, o Tilts with built-in hydraulics, roller drive for automatic glass transport to the cutting table • 1 fully automatic float glass cutting table o Type: XYT 972, Serial No. E980016-2 o Can also be used for shaping, waste optimization, and PC Terra o Maximum dimensions 3300 x 2550 mm o Glass thicknesses 2-15 mm o With belt conveyor • 1 breaking table with breaker bars and air cushions o Serial No. E980016-4

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Pgedpeyhbt Hsfx Akisu Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: D12E/8177, Offer Number: D12E/8177 Machinetype: wire nail press Make: WAFIOS Pgjdpfx Aewi Tk Iokisu Type: N61 Constr. year: 1986 wire diameter: 3,1-5,2 mm nail length: 13-150 mm capacity - pieces/min: 370 Location: Europe

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Pgsdpfx Ajilhfcjkiou

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Pjdpfx Akexlngasisgu Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Pjdpfx Asl Hx Rpokiegu

Condition: used, GRUNDFOS vertical multistage high-pressure centrifugal pump Pump in like-new condition, but a part of the magnetic coupling has been removed. Pgodpfx Akofupadoiou Type CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Power supply: 400 volts, 50 Hz Power: 3 kW - Pump design with 9 stages - Made of stainless steel 1.4401 - The like-new pump was used as a source of spare parts, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packaged in the original wooden crate Pump dimensions (L x W x H): 1100 x 250 x 300 mm Shipping crate dimensions (L x W x H): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg Like new Not a submersible pump or a deep-well pump.

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: D48E/7965, Offer Number: D48E/7965 Machinetype: barbed wire machine Make: WAFIOS Type: STH2 Constr. year: 1981 line wire diameter: 1,6-2,8 mm point wire diamter: 1,4-2,5 mm output - meter/min: 25-38 Location: Europe Pgodpfsx Ea E Ijx Akiou

Condition: excellent (used), Year of construction: 1994, Nail making machine Make: WAFIOS Type: N90 Constr. year: 1994 diameter range: 2,5-3,8 mm nail length: 50-90 mm output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !! Pgjdsuhxqmjpfx Akiju

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8373, Offer Number: D12L/8373 Machinetype: wire nail press Make: WAFIOS Type: S110 Constr. year: 1970 diameter range: 2,2-3,8 mm nail length: 13-110 mm output - pieces/min: 350 Podpjwi Ubnofx Akiogu Location: In our warehouse