Used water-jet cutting equipment and machines for sale (46)

Condition: good (used), Year of construction: 2017, functionality: fully functional, working range: 3,050 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 220 mm, positioning accuracy: 0.015 mm, input voltage: 400 V, table length: 3,050 mm, operating speed: 250 mm/s, table width: 1,525 mm, pressure: 4,137 bar, positioning speed: 15 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, table height: 840 mm, operating pressure: 4,137 bar, input current: 77 A, total height: 1,300 mm, total length: 4,210 mm, total width: 2,130 mm, water pressure: 2.8 bar, pump pressure: 4,137 bar, overall weight: 3,850 kg, working length: 3,050 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, 2017 Swiftcut Swift-Jet CNC Waterjet Cutting Machine – Under 900 Hours Use High-Precision CNC Waterjet Profile Cutter – Low Hours, Good Condition – Now Available at Used Machine Tools Ireland Ltd 🔍 Overview: We are offering this 2017 Swiftcut Swift-Jet Waterjet Cutting Machine, a top-tier solution for high-precision, cold-cutting of a wide range of materials including metal, stone, plastic, glass, and composites. With less than 900 operational hours, this machine is in very good condition and ideal for any business seeking reliable, accurate, and versatile cutting performance. 🛠️ Machine Specifications: Brand: Swiftcut Model: Swift-Jet Year of Manufacture: 2017 Technology: CNC Waterjet Profile Cutting Cutting Area: 3000 x 1500mm Hours Used: Less than 900 hours Pump Type: High-pressure waterjet pump Cutting Method: Abrasive and pure water capability Software: Swiftcut Control Software (user-friendly, intuitive interface) Table Dimensions: 3000 x 1500mm Max Sheet Size: 3050 x 1525mm (10' x 5') Max Traverse Speed: 15m.min Max Z Axis Clearance: 220mm Hfedpfx Aewb D S Hoalsd Positional Accuracy: 0.015mm Tank Depth: 840mm Max Pressure: 60,000psi(4137bar) Continuous Pressure: 60,000psi Min. Piercing Pressure: 20,000psi Max Output Flow: 3.8l/min Max Orifice Size: 0.36mm Min Orifice Size: 0.13mm Cutting Water Infeed: 7.6l/min Water Pressure Infeed: 2.8bar Pump Voltage: 400V/77A Pump Power: 37kW/50HP Machine Voltage: 1ph/16A Water Treatment Voltage: 1ph/10A Garnet Hopper Voltage: 1ph/10A Machine Dimensions: 4210 x 2130 x 1740mm Pump Dimensions: 1850 x 920 x 1300mm Machine Weight: 2400kg(empty) Pump Weight: 1450kg 🌟 Key Features: Cold-cutting process – no heat-affected zones, preserving material integrity Precise and clean cuts on a variety of materials and thicknesses Ideal for metal fabrication, signage, engineering, prototyping, and more Compact footprint, easy installation, and low maintenance Exceptional build quality from a trusted UK manufacturer 🔧 Applications: Perfect for cutting: Mild Steel, Stainless Steel, Aluminium Brass, Copper Stone, Granite, Marble Plastic, Acrylic Glass, Rubber, Composite Materials ✅ Why Choose This Swift-Jet? Very low hours – lightly used and well maintained Excellent condition – ready to work immediately Cost-effective alternative to brand new equipment Supported by Swiftcut's strong reputation for service and performance Take advantage of this rare opportunity to own a high-spec waterjet cutting system with low hours – ideal for precision fabrication. Act quickly – this unit won’t last long! Used waterjet cutting machine Ireland, Swiftcut Swift-Jet for sale, CNC waterjet profile cutter, low hours waterjet machine, 2017 Swift-Jet waterjet, metal and stone cutting machine, abrasive waterjet cutter, used CNC cutting machines Ireland, high-precision waterjet cutter, used fabrication equipment for sale Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,270 h, travel distance X-axis: 1,505 mm, travel distance Y-axis: 3,005 mm, travel distance Z-axis: 210 mm, number of axes: 5, This 3-axis PHENIX MD JET 1530 was manufactured in 2021. It features a spacious 1500 x 3000 mm table and a powerful 30HP hyperthermal pump capable of 4100 bar pressure. The machine has 1290 hours of operation and includes essential components such as a pump, tank, filter drain, and a salt softener. If you are looking to get high-quality waterjet cutting capabilities, consider the PHENIX MD JET 1530 machine we have for sale. Contact us for further details. Hfedpfx Aaeytf T Ielod • 1500x3000 Table • 30HP Hyperthermal Pump • 4100 Bar Pressure • 1290 Hours • Joystick (Faulty, needs repair or removal, but functions without the option) Additional equipment • Cooling Radiator with Barrier and Hardware • Salt Softener Included • Consumables Included • Pump/Tank/Filter Drain for Sale

Condition: ready for operation (used), Year of construction: 2018, travel distance Z-axis: 305 mm, total height: 2,692 mm, overall weight: 2,041 kg, number of axes: 3, This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine. • Work envelope / cutting table: • Cutting X-axis travel: 10’ 0’’ (3,061 mm) • Cutting Y-axis travel: 6’ 7’’ (2,019 mm) • X-axis table size: 12’ 2’’ (3,708 mm) • Y-axis table size: 7’ 0’’ (2,134 mm) • Material support slats: 4’’ × 14 ga galvanized steel (102 mm × 2 mm) • Performance: • Traverse speed: 500 in/min (12,700 mm/min) Hfsdpfx Aaeya Ecijljd • Repeatability: ±0.001’’ (±0.025 mm) • Accuracy: ±0.003’’ (±0.076 mm) • Pump & cutting head: • Pump power: 30 HP • Cutting head: MAXJET 5i with A-Jet (5-axis cutting) • Nozzle life: Diamond orifice, approx. 500 hours (guaranteed) • Dimensions & weight: • Operating weight: 20,500 lb (9,299 kg) • Overall height: 8’ 10’’ (2,692 mm) • Footprint (without controller): 14’ 1’’ × 14’ 1’’ (4,293 × 4,293 mm) • Slat bed: • Standard configuration: 34 slats • Maximum slat configuration (optional): 117 slats • Maximum material load: 300 lb/ft² (1,465 kg/m²) • Standard features: • Intelli-TRAX abrasive-jet linear drive system (1 micron resolution) • Brushless servo motors and drives • Abrasive feed system (15 lb capacity) • Rugged catcher tank (300 lb/ft² load capacity) • Industrial steel protection covers on X-axis • Modular bridge control and power centers • Low-noise pump and system design • Windows-based control system • IntelliMAX Standard Software (2 seats) • Mobile control station with widescreen display • No special foundation required • Ergonomic full table access • Made in the USA

Condition: ready for operation (used), Year of construction: 2019, total height: 2,500 mm, overall weight: 2,700 kg, number of axes: 3, This 3-axis STM WS3040 waterjet cutting machine was manufactured in 2019. It features a large effective cutting area of 3000 x 4000 mm, dual Z-axis CNC for enhanced precision, and is equipped with advanced NUM FLEXIUM plus 3D 5-axis control. Additional highlights include LED work area lighting, a high-pressure Servotron pump, and comprehensive safety technology. If you are looking to get high-quality cutting capabilities, consider the STM WS3040 machine we have for sale. Contact us for more information. Additional equipment • Retrofit between 2020-2023 Machine Benefits Hjdpfx Aox D Sktoaljfd Technical Machine Benefits • Quick up feature • High-pressure connection between pump and cutting head • Pressure relief valve • Effective cutting area: 3000 x 4000 mm • 2x z-axis cnc 3d with a and b axes • Clearance height: 300 mm with quick up • 2x stm3d cutting heads with cutting angle error compensation, pivotable up to 68° • Max material thickness: 50 mm • Support surface: 3100 x 4100 mm • 2x electric pre-drilling unit for material Extra Information Pressure Bag Filter for Wastewater Treatment Machine-Specific Data Servotron 40.45+ High-pressure Pump: 4.6 liters/min, 45 kW CNC Abrasive Dosing Unit with Intermediate Container 1600 kg Abrasive Storage Container with Mini Hopper Media Oil Filling, AC Oil/Air Heat Exchanger OneClean Hydrofilter including Automatic Water Level Control for Cutting Tank Water Analysis System Control Unit CNC Control: NUM FLEXIUM, 40 m/min Handheld Control Unit Touch Screen Operation Work Area Lighting via LED Strip Dimensions Machine Depth 3900 mm

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 2,050 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 200 mm, total height: 1,600 mm, spindle motor power: 45,000 W, product length (max.): 1,800 mm, spindle speed (max.): 1,800 rpm, This H.G. Ridder Waricut HWE 3020 2 2 D Retrofit was manufactured in 2023. It features two cutting heads, each capable of a maximum travel of 2,450 mm. Key specifications include a travel range of 2,050 mm (X) and 3,050 mm (Y), with a Z-axis travel of 200 mm. It boasts a maximum linear speed of 20 m/min and an installed drive power of 45 kW. Contact us for more information about this waterjet cutting machine. • Cutting heads: 2 • Maximum travel per head with two cutting heads: 2,450 mm • Cutting head: Z-axis CNC, sD version • Manual cutting head adjustment (Y): ±45° • Manual cutting head adjustment (X): ±10° • Position uncertainty P: < ±0.050 mm • Mean position variation Ps: < ±0.030 mm • Maximum linear speed: 20 m/min • Minimum water pressure: 3 bar • Maximum water temperature: 40°C • Flow rate: 0.7–6.4 l/min • Design pressure: max. 3,800 bar Additional equipment Hfsdpfx Aasx D Ik Ajled • Pump • Sludge removal system

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, number of axes: 3, This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. • Operating hours: less than 800 hours • First commissioning: September 2021 • Working area: 4020 × 2020 mm (4 m × 2 m) • Design: Cantilever (gooseneck-type) structure • Axes: 3 axes (X, Y, Z) driven by ball screws Hfodpfx Aaox Sz A Rjlod • Software & control: FlowMaster license included; FlowMaster programming/control installed on the machine control station and an additional customer PC • Abrasive waterjet cutting system: • Cutting head: Flow PASER 4 with high-pressure ON/OFF valve • High-pressure generation: • Pump: Flow Hyplex Prime 30 ultra-high-pressure pump • Maximum pressure: 4,150 bar • Features: High efficiency with integrated autonomous cooling • Workpiece support tank: Heavy-duty painted steel tank, independent from the machine axes Additional equipment • High-pressure piping kit (from pump to cutting head) • Laser pointer for positioning (red dot for program alignment) • UltraPierce system (abrasive suction/Venturi) for chip-free piercing of sensitive materials (glass, stone, composites, plexiglass) • EcoFlow cutting sludge extraction system with pneumatic diaphragm pumps and hopper for abrasive recovery into a big bag • Flow abrasive feeding system

Condition: used, Year of construction: 2019, Waterjet cutting machine with plasma Manufacturer: TCI Cutting Type: BP-C 4020 Year of manufacture: 2019 CNC control: TCI CNC 4.0 Working area: 4x2 m Equipment: 1 cutting head KMT OEM SL-VI 50 HP 4,000 bar with high-pressure pump 1 plasma cutting head with Hypertherm XPR300 power source High voltage control system TCI SRA 4.0 Abrasive transfer system Abrasive measuring system Collision protection system Water treatment system TCI HIDROSYSTEM 2.0 Sludge removal system Hodpfx Asykqwtjalefd Lantek Expert 2D software with automatic nesting feature

Condition: excellent (used), Year of construction: 2018, operating hours: 240 h, functionality: fully functional, machine/vehicle number: Maschinen-Nr. 8914, working range: 4,250 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 1,000 kg, type of input current: three-phase, input voltage: 400 V, table length: 4,650 mm, table width: 2,050 mm, pressure: 4,150 bar, travel speed (max.): 40,000 mm/min, table load: 1,000 kg, total height: 3,800 mm, total length: 6,700 mm, total width: 3,000 mm, compressed air connection: 8 bar, pump pressure: 4,150 bar, overall weight: 4,500 kg, product height (max.): 350 mm, power: 30 kW (40.79 HP), We are offering this very well-maintained CMS brembana idroline S waterjet cutting machine, year of manufacture 2018, for immediate sale. This is a rare opportunity to acquire a machine with extremely low operating hours—only 240 operating hours!—in excellent condition. Hfodpfx Asyti Iioaljd If you are looking for a robust, reliable precision machine equipped with a 5-axis head, including Easy-Stone software and a 15" TFT color display with membrane keyboard, this is the right choice. It features the CMS Powder Free System and protected guides against water and dust. The rack and linear guides are housed within the structure and protected by labyrinth sealing systems. The machine has a gantry bridge construction, allowing workpiece supports up to 1000 kg/m². Machine weight without water is approximately 4500 kg. It is fitted with lifting doors—one at the front and one at the rear—ensuring no splash water or abrasive ends up on the workshop floor. Sand is removed from the water tank by means of a chain conveyor. The abrasive medium feeder can handle up to 330 kg of sand, and the tank holds 8,000 liters of water. The unit is equipped with a Greenjet EVO high-performance pump: 4150 bar / 30 kW / 40 HP / 400 V +/-5%, 50-60 Hz. Manufacturer: CMS Model: brembana idroline S Year of Manufacture: 2018 Machine Type: Waterjet cutting machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16/195245, repeat accuracy: 0.025 mm, working range: 3,660 mm, travel distance X-axis: 3,660 mm, travel distance Y-axis: 1,830 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 200 mm, table length: 4,000 mm, operating speed: 212 mm/s, table width: 2,000 mm, pressure: 6,000 bar, positioning speed: 12,700 m/min, rapid traverse X-axis: 12,700 m/min, rapid traverse Y-axis: 12,700 m/min, operating pressure: 6,000 bar, cutting speed: 7,620 mm/min, travel speed (max.): 12,700 mm/min, feed length X-axis: 3,660 mm, feed length Y-axis: 1,830 mm, feed length Z-axis: 200 mm, total width: 21,000 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, water pressure: 6,000 bar, compressed air connection: 6 bar, pump pressure: 6,000 bar, product height (max.): 200 mm, working length: 3,660 mm, input frequency: 50 Hz, power: 75 kW (101.97 HP), load capacity: 3,200 kg, throat depth: 21,000 mm, FLOW I-6012 IFB – Premium Waterjet Cutting System with 87,000 PSI & Dynamic Waterjet Cut ANY material up to 250 mm thick – with precision down to 0.025 mm. This Flow IFB is not your standard waterjet system. Featuring 87,000 PSI HyperPressure technology and the patented Dynamic Waterjet cutting head, it belongs to the absolute top range of machines. Comparable new systems today cost over €400,000. WHY THIS MACHINE WILL IMMEDIATELY BENEFIT YOUR OPERATION: - 87,000 PSI instead of the usual 60,000 PSI: This translates into 20-50% higher cutting speeds and 30-50% lower abrasive consumption, significantly reducing your unit costs in daily operation. - Dynamic Waterjet with 5-axis kinematics: Automatic compensation for taper and stream lag. Achieve burr-free, taper-free cut edges at 2-4 times the speed of conventional machines – with no need for secondary finishing. - Immediately production-ready after oil change: The system was in regular operation until August 2025. No years of downtime, no hidden damages. Operating hours can be read directly at the control unit during inspection. - Large cutting area 1,830 x 3,660 mm: Process large sheets, plates, and components without repositioning. Ideal for contract manufacturing, metal fabrication, stone processing, and prototyping. - Siemens Sinumerik 840D: Industry-standard control system. Your operators are familiar with the interface, and spare parts and support are available long-term. TECHNICAL DATA: Manufacturer: Flow International Corporation (USA) Model: I-6012 IFB (Integrated Flying Bridge) Year: 2007 Serial No.: 2006353W-044 Cutting range: 1,830 x 3,660 mm Z-axis: 200 mm Table size: 2,000 x 4,000 mm Table type: slat table with water catch basin Pump: Flow HyperJet Model 7X Intensifier Operating pressure: 87,000 PSI (6,000 bar) Motor: 100 HP (75 kW) Power supply: 400V / 3-phase / 50 Hz Cutting head: PASER ECL Plus with Dynamic Waterjet Axes: 5 axes (+/- 10° articulation) Height sensor: automatic Accuracy: +/- 0.025 mm Repeatability: +/- 0.025 mm Max. traverse speed: 12,700 mm/min Max. cutting speed: 7,620 mm/min Controller: Siemens Sinumerik 840D Software: FlowMaster / FlowPath CONDITION: The machine is stored dry and protected in a hall. All components are complete. There is no visible damage or corrosion. An oil change is required prior to recommissioning. Operating hours can be read directly at the Sinumerik control during inspection. SCOPE OF DELIVERY: - Complete Flow I-6012 IFB waterjet cutting system - 87K PSI HyperJet intensifier pump with 100 HP motor - Dynamic Waterjet cutting head (5-axis, PASER ECL Plus) - Siemens Sinumerik 840D control with PC operator station - Complete abrasive delivery system - Slat table with catch basin - Complete electrical cabinets Hfjdpfsyl S Nyex Aaled - Spare parts on pallet (high-pressure hose, various components) - 8 original manuals (German/English) Overhead crane available for loading on site. Inspection possible at any time by appointment.

Condition: used, power: 45 kW (61.18 HP), WATER JET MACHINE INTENSIFIER PUMP JET CUT 45 KW WORKING ORDER. Hfodpfxex U Ax Se Aaljd large capacity pump that is capable of running single or multi head machines. spares package as shown

Condition: good (used), Year of construction: 2012, Machine is in good working condition. Hfjdpfx Ajylx Hrsaled

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,240 h, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Application Types Cutting Hodpex D Rxpefx Aaljfd

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! Hedshqnl Tepfx Aalefd So you can work longer than 1 hour.

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits Hfodpfx Aaed Ab Uuolsd No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: used, Year of construction: 2009, operating hours: 3,303 h, functionality: fully functional, pressure: 4,000 bar, overall weight: 990 kg, Uhde HPS 4011 High pressure pump 15 HP /HP Hsdouixdcopfx Aaljfd (Pictures are condition)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,209 h, General Data Machine weight 3000 kg Measurements height 1800 mm Measurements depth 2300 mm Hfjdpfex Enidox Aaled Dimensions Machine Length 4500 mm Main Drive Number of axis 3 Movement X-Axis Movement 3400 mm Z-Axis Movement 200 mm Y-Axis Movement 1800 mm This 3-axis Waterjet Italy CLASSICA CL 510 was manufactured in 2011, featuring a cutting area with dimensions of 3400 mm by 1800 mm and a Z-axis height of 200 mm. It includes a high-pressure KMT SL-V pump and an ESA S510 controller. If you are looking to get high-quality cutting capabilities, consider the Waterjet Italy CLASSICA CL 510 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2020, operating hours: 57 h, Main Drive Number of axis 5 Additional Equipment Smart Abrasive Reserve Tank Included Tank Capacity: 350 kg Tank Pressure: 6 bar Sand Dosing System: Adjustable via CNC (flow 50–1000 g/min) This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information. Application Types Hjdpjx D Hlrjfx Aalofd Cutting

Condition: good (used), Year of construction: 2019, Waterjet cutting system Working area: X-axis 2,002 mm, Y-axis 3,001 mm (bridge), Z-axis clearance 300 mm CNC-milled cutting tank made of aluminum and stainless steel CNC Z-axis with 300 mm clearance and Quick-up Z-axis with automatic height sensing Allfi waterjet cutting valve Control cabinet STM OneClean hydro filter – automatic abrasive sludge removal Automatic water level regulation in the cutting tank Stainless steel coarse particle filter module Hjdpfx Aasyhnhdsljfd

Condition: good (used), Year of construction: 2002, Ingersol rand streamline plus waterjet intensifier pump. Hfedpfx Aonp Iywoalod good working condition

Condition: refurbished (used), Year of construction: 2005, operating hours: 482 h, functionality: fully functional, machine/vehicle number: 0502072, input voltage: 400 V, pressure: 3,792 bar, operating pressure: 3,500 bar, input current: 30 A, water pressure: 3,792 bar, compressed air connection: 6 bar, pump pressure: 3,792 bar, overall weight: 850 kg, power: 11 kW (14.96 HP), KMT SLV 15 HP high pressure pump Pressure intensifier, control, hydraulics cleaned and checked. Hedpfjvncvlex Aalefd Oil/water cooling available (Pictures are the condition)

Condition: excellent (used), Year of construction: 2016, CMS Tecnocut Easyline Cutting Area / Axis Movement Hfodpfx Asd I D R Tealjd X-Axis: 2.000 mm Y-Axis: 4.000 mm Z-Axis: 220 mm Options: - 3-Axis Cutting Head - Sanddoser - 22,5 kW High Pressure Pump Easypump

Condition: used, Year of construction: 1997, functionality: fully functional, Model: BAS 100. Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Annealing timer. Blade positioning device. Year of manufacture: 1997. Automatic annealing temperature control. Hfjdpfjw Snpiex Aalod Welding wood strip up to 100 mm. Bimetal strip up to 80 mm. Connection: 3 x 220 V. (3 x 400V available on request) Weight: 500 kg. Dimensions (W*D*H): 1400*900*1500 mm. Instructions and packing included.

Condition: like new (used), Year of construction: 2022, operating hours: 90 h, MAXIEM 1530 Demonstration machine Year of manufacture: 2022 Pump working hours: 90h Hedpjtq Emxefx Aalofd Equipment: • M30 pump with 30HP (22kW) power; • Worktable with a head operating range of 3048mm x 1575mm; • Control computer with Windows 10 and software; • Cutting head integrated with diamond flange; • 300kg abrasive feeder.

Condition: excellent (used), Year of construction: 2008, operating hours: 5,357 h, functionality: fully functional, For sale: Complete Flow WMC2-4020 waterjet cutting system equipped with a 60 ksi (4200 bar) high-pressure pump and dual cutting heads. The machine is offered as a fully functional set, ready for operation. Technical details: Model: Flow WMC2-4020 Cutting heads: 2 (dual head configuration) Pump pressure: 60 ksi / 4200 bar Total operating hours: 5,357 h Hfodsyluu Eopfx Aalod Year of manufacture: The pump and motor are marked with year 2006. We estimate the machine itself to be from around 2008. Unfortunately, the exact production year cannot be clearly identified from the nameplate. The machine is sold as a complete package, including all components required for operation.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€) Hfedpfxoi Hckrj Aaled