Used tool grinders for sale (193)

Condition: excellent (used), Year of construction: 2013, operating hours: 1,169 h, functionality: fully functional, Ladies and Gentlemen, Chsdpfx Absva Dumsbsf We offer you a very well equipped Schütte grinding machine. Please refer to the technical data sheet for a technical description.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, spindle speed (min.): 12,000 rpm, power: 12 kW (16.32 HP), warranty duration: 6 months, Our machine is completely Liner-moving, machine maintenance has been done, we give 6 months warranty for the machine. Installation and training will be done by our company. Cedpfx Abewizunsbohf Features X/Y/X linear motor A/C torque motor Glass rulers Haidenhein 5-piece stone change Eco robot (active) 400 mm helix opening feature All sizes of GunDrill can be connected and sharpened. 3D cutting tool simulation is available.

Condition: used, Year of construction: 1982, x-travel 0 mm y-travel 0 mm table length 600 mm table width 400 mm total power requirement 2 kW Cedpfet Hwr Uox Abbshf weight of the machine ca. 1500 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 890000190, 5-axis grinding machine for the production of indexable inserts. Extensive equipment with handling system, force measurement, Vomat oil filtration system and new oil mist extraction unit (installed 2022). Overhauled and upgraded for voltage 3 in 2022. New fire extinguishing system from 2022. Machine ready for demonstration. Chedpfx Absw S Im Usbof

Year of construction: 1984, condition: used, gr. grinding Ø: 40 mm small grinding Ø: 5 mm weight: 0,9 t 2 grinding wheels with flange Chsdpfocq Rv Usx Abbsf 8 collets 1 coolant tank mechanical feed with fixed stop The cardan shaft for the workpiece drive is worn out

Condition: used, Year of construction: 1985, machine/vehicle number: 113785, 4 - station tool grinding machine pre-grinding - disc 200 x 50 x 51 mm - table size 400 x 200 mm Cjdpfjg H Ng Dsx Abbjhf re-grinding - disc 200 x 50 x 51 mm - table size 400 x 200 mm lap grinding - disc / diamant 125 - 12.5 x 51 mm - table size 400 x 200 mm chip groove - disc - 150 x 8 x 51 mm coolant device  workplace lamp motor speed 1,400 x / 2,800 rpm electrical data 380 V / 0.37 / 0.6 KW space requirements width - 1,100 x depth - 1,000 x height - 1,400 mm weight approx. 340 kg

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, spindle speed (max.): 7,000 rpm, feed length Y-axis: 320 mm, type of input current: three-phase, overall weight: 4,650 kg, center height: 190 mm, travel distance X-axis: 490 mm, grinding spindle motor power: 24,000 W, workpiece diameter (max.): 320 mm, input voltage: 400 V, nominal power (apparent): 35 kVA, spindle nose: ISO 50, swivel angle A-axis (min.): 360 °, CNC tool grinding machine - WALTER Helitronic Power Production TECHNICAL CHARACTERISTICS: CNC control: HMC 500 Software installed: Tool Studio 2.1 R4 Number of axes: 5 Height of centers: 190 [mm] Stroke X: axis 490 [mm] Resolution X axis: 0.00001 [mm] Stroke Y axis: 320 [mm] Resolution Y axis : 0.00001 [mm] Stroke Z axis: 660 [mm] Resolution Z axis: 0.00001 [mm] Cjdewvf I Sepfx Abbshf Traversing feeds X, Y and Z axes: 15000 [mm/min] A axis: 360 [°] C axis: +/- 200 [°] Resolution C axis: 0.0001 [°] Max. workpiece lenght: end face grinding: 320 [mm] Max. grinding length: 350 [mm] Max. grinding diameter: 320 [mm] Grinding spindle attachment: NCT Grinding spindle diameter: 80 [mm] Grinding wheel max. speed: 7000 [rpm] Grinding spindle motor power: 24 [kW] Max. diameter grinding wheel: 200 [mm] Internal workpiece spindle nose: ISO 50 Workpiece spindle max. speed: 60 [rpm] Total power required: 35 [kVA] Weight: 4650 [Kg] EQUIPMENT INCLUDED: x1 TRANSOR 12290-800A filtration unit x1 MTA oil chiller model TAE 015 x1 DSL oil mist extractor model AES-GAMMA 30 x1 RENISHAW part probe x1 disc-type tool loader 40 positions x1 SCHUNK gripper x2 grinding wheel arbor adapters x1 fire protection system - to be inspected by the buyer through a certified organization x1 electrical schematic manual x1 Service Instructions manual LICENSED WALTER WINDOW MODE (WWM) PACKAGES: - Package 001 (cylindrical mills) - Package 002 (tapered mills) - Package 003 (drills) - Package 004 (step drills) - Package 006 (woodwork tools) - Package 013 (reamers) - Package 015 (insert seats) - Package 016 (warmup program) - Package 027 (flexible program) - Package 090 (loader package) - Package 091 (acm) - Package 098 (loader package) - Package 099 (loader package) - Package 100 (reference data m.) - HELICONE (flute calc. conical.) - HELIDRILL (flute calc. drills) - HELIFLUTE (flute calc. cyl. mill.) - MCS (machine control .) - SCHEIBE (wheels menu) - TS_ADVANCED (toolstudio (v1.0-v.) - TS_STANDARD (toolstudio (v1.0-v.) - TS_STEPTOOLS (toolstudio (v1.0-v.) LICENSED TOOLSTUDIO OPTIONS: - Tool Studio 2.0 server/machinecontrol - Tool Studio 2.0 standard license - Tool Studio 2.0 advanced license - Tool Studio 1.9 upgrade options - Tool Studio 2.0 upgrade options - Option steptools - Option profile light (contour roughing ...) - Option calibration w/ touch probe - Option drills Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: used, FOR SALE – Michael Deck Grinding Machines (S20 NUM, S22 NUM, S22 MTS) 3 different models of grinding machines, produced with Michael Deck quality and distinguished by their precision and durability, are offered for sale. All machines are in working order and their maintenance has been done regularly. They are suitable for mass production and special grinding needs. On-site inspection and technical support can be provided upon request. ⸻ 🔹 1. Michael Deck S20 NUM • Control Unit: NUM control system • Grinding Type: Cylindrical grinding (inner and outer diameter) • Distance Between Centers: 400 mm • Center Height: 100 mm • Grinding Motor: 3.7 kW • Accessories: Magnetic table, diamond center, cooling unit Codpfewta Hqex Abbjhf ➡️ It is ideal for delicate works in the workshop with its compact structure. Easy to use and high energy efficiency. ⸻ 🔹 2. Michael Deck S22 NUM • Control Unit: NUM digital control system • Distance Between Centers: 500 mm • Center Height: 125 mm • Spindle Motor: 5.5 kW • Grinding Motor: High frequency, variable speed • Equipment: Internal grinding head, automatic lubrication, digital position indicator ➡️ Provides high repeatability in mold, tool and precision part production. Also suitable for heavy work thanks to its high torque motor. ⸻ 🔹 3. Michael Deck S22 MTS • Control: Manual / Servo-assisted hybrid system • Center to Center Distance: 600 mm • Center Height: 150 mm • Additional Features: • Linear ruler X-Z measurement • Automatic balancing system • Quick wheel change mechanism • Programmable positioning ➡️ Offering both manual and automatic control, this model is ideal for special grinding scenarios and flexible production environments. ⸻ 📍 Location: Turkey - Can be tested in a workshop environment. 📦 Status: Working, well-maintained and ready. 📄 Documentation: Technical documentation and past service records are available upon request.

Condition: used, Year of construction: 2006, Offer in progress! Cedpfxswftufs Abbjhf

Condition: like new (used), Year of construction: 2020, operating hours: 4,000 h, The machine is as good as new. It is equipped with an ELBARON sanding mist extraction system. The machine can also be supplied without this device on request. The package includes collets for all standard diameters up to 20 mm. Complete description and installation manual. An original spare spindle is available on request. So there is no waiting time for spindle maintenance. Cjdpfxot Dykne Abbohf English: The machine is in mint condition. It is equipped with an ELBARON grinding mist extraction system. On request, the machine can also be delivered without this device. The package includes collets for all common diameters up to 20 mm. Full description and installation manual. An original spare spindle is available on request. So there are no waiting times for spindle maintenance.

Year of construction: 1979, condition: good (used), May WH50 relief grinding machine Data: Manufacturer: Rhode & Dörrender (May) Type: WH 50 year of manufacture: 1979 small grinding Ø: 3mm gr.grindingØ: 50mm weight: 1,35t footprint: 1520 x 1600mm Application range: 2 to 4 cutting tools round and relief grinding Suitable for grinding molding tools Diaform dresser Cedpjhadxcofx Abbshf

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 061, feed length Y-axis: 35 mm, feed length Z-axis: 67 mm, grinding length: 50 mm, grinding spindle speed: 6,000 rpm, grinding diameter: 2 mm, disc diameter: 150 mm, section length (max.): 15 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the period from 28.07.2025 to 31.07.2025. Three simultaneous axes + two robot axes Chodpfowvi Rksx Abbjf TECHNICAL DETAILS Control: ROLLOMATIC Grinding Range Grinding diameter: 0.1 – 2.0 mm Collet: B 8 Cutting length: 0 – 15 mm Helix angle: 24 – 45° Overall length: 30 – 50 mm Travel Z: 67 mm Travel Y: 35 mm Axes A: 63° B: 360° C: 360° Station 1 Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Station 2 Flute and relief grinding Direct drive spindle: 70 mm diameter, 0.30 kW Inverter: 2,000 – 6,000 rpm Grinding wheel for flutes: 150 mm Ø Grinding wheel for relief: 100 mm Ø MACHINE DETAILS Overall height: 2,200 mm Overall length: 2,000 mm Overall width: 2,300 mm Total weight: 2,000 kg Operating voltage: 3 x 380 V Frequency: 50 Hz

Condition: excellent (used), grinding wheel (ØxWxd): 125 x 20 x 20 mm Speed: 2800 rpm longitudinal adjustment: 130 mm cross adjustment: 80 mm height adjustment: 65 mm rake angle: +25° to -10 Codpfxsfqicxe Abbehf Dimensions WxDxH: approx. 550 450 450 x 650 mm Weight: approx. 70 kg

Condition: new, functionality: fully functional, Joerg S-Techplus is a technology company headquartered in Germany and focused on 5-axis CNC tool sharpening machines. The machines it develops are optimized for the precision production and resharpening of both HSS (high speed steel) and carbide cutting tools. Product development and engineering processes are carried out in Germany, while machine production is carried out in China in accordance with high quality standards. In this way, Joerg S-Techplus combines cost advantage with European engineering and offers competitive solutions in the global market. Chodswizvxopfx Abbef As the representative of Turkey, CoreCut Cutting Technologies provides support to its customers in all processes from pre-sales consultancy to after-sales technical support. With its wide application area, user-friendly interface and high precision, Joerg machines are an efficient and reliable production platform for tool manufacturers. For more information and product catalog, you can contact us and visit us.

Condition: used, Year of construction: 1992, max. grinding diameter 0 mm grinding length 0 mm workpiece length 970 mm total power requirement 12 kW Csdjt Hwpaopfx Abbjhf weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2013, SAACKE CNC grinding center model UW I F Chjdpfx Aov Ef Ekjbbsf with 5 controlled axes X, Y, Z, A + B and fully automatic grinding wheel changer NUM Axium Power control with PC Electrostatic oil mist separator Accessories: GS filter system RBAFWT 113 stationary with coolant filtration for attachment to a CNC grinding machine SAACKE Büchele filter system Software extension for multi-spiral for cylindrical milling cutters without face, with flat face or corner chamfer with up to 12 different spiral angles

Condition: good (used), Wilhelm Haarmann KG, DM PU, Grinding machine Chsdpfx Aobq Syyebbsf

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 236, spindle speed (max.): 6,000 rpm, feed length Y-axis: 35 mm, feed length Z-axis: 67 mm, grinding length: 50 mm, grinding diameter: 2 mm, section length (max.): 15 mm, No minimum price – sale guaranteed to the highest bidder! Submitting a bid obliges you to collect the item within the period from 28.07.2025 to 31.07.2025. Three-axis simultaneous + two robot axes TECHNICAL DETAILS Control: ROLLOMATIC GRINDING AREA Grinding diameter: 0.1 – 2.0 mm Collet: B 8 Cutting length: 0 – 15 mm Spiral angle: 24 – 45° Overall length: 30 – 50 mm TRAVEL Travel Z: 67 mm Travel Y: 35 mm AXES A: 63° B: 360° C: 360° STATIONS Station 1: Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Overall length: 30 – 50 mm Station 2: Flute and relief grinding Direct drive spindle: 70 mm diameter, 0.30 kW Chodpfx Abswvi H Sebjf Frequency converter: 2,000 – 6,000 rpm Grinding wheel (flutes): 150 mm diameter Grinding wheel (relief): 100 mm diameter MACHINE DETAILS Operating voltage: 3 x 400 V Frequency: 50 Hz Overall height: 2,200 mm Overall length: 2,000 mm Overall width: 2,300 mm Total weight: 2,000 kg

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: TX7_600195, total height: 22,500 mm, total length: 25,200 mm, total width: 15,500 mm, workpiece weight (max.): 25 kg, spindle speed (max.): 10,000 rpm, grinding wheel diameter: 202 mm, overall weight: 7,500 kg, grinding length: 400 mm, grinding spindle motor power: 37,000 W, power: 37 kW (50.31 HP), workpiece diameter (max.): 300 mm, disc diameter: 202 mm, 5-axis CNC tool and cutter grinder - available in used condition or fully rebuilt. Powerful and versatile machine with large working envelope and high spindle power for wide range of operations and requirements. Based on a rigid and stable polymer concrete bed (ANCAcrete), it comes with a 37kW direct driven spindle, 2-station wheel changer for up to eight wheels, automatic pallet loading (520 tools max, 15s loading time), mist extraction unit, steady bed and headstock dressing. Ideally suited for volume production of carbide and HSS cutting tools. Chsdpfx Aoq Sud Rjbbjf !This offer is only available in Europe, Middle East and Africa!

Condition: used, Year of construction: 2011, functionality: fully functional, spindle speed (min.): 12,000 rpm, grinding wheel diameter: 200 mm, overall weight: 5,000 kg, power: 20 kW (27.19 HP), warranty duration: 6 months, Our machine is in working condition and has automatic chain loading. Installation and training will be done by our company. The machine will be sold with a 6-month warranty. Please contact us for price and other questions. Cjdpfxjwizq Ns Abbshf

Condition: used, Year of construction: 1994, workpiece diameter 110 mm grinding length 410 mm clamping length 20 mm total power requirement 0,25 kW Codpjt Hw Nmofx Abbjhf weight of the machine ca. 500 kg dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1000x1600 mm Weight 350 kg Chjdpfx Absvz Ht Iobof Total power requirement 0,6 kw

Condition: used, Year of construction: 1996, functionality: fully functional, spindle speed (min.): 10,000 rpm, power: 12 kW (16.32 HP), warranty duration: 3 months, Our machine is well maintained and fully functional. Installation and Training will be provided by our company. The machine has a 3-year warranty after installation. Please contact us for price and details. Chsdowiztqopfx Abbjf

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, spindle speed (min.): 12,000 rpm, power: 12 kW (16.32 HP), warranty duration: 6 months, Our machine is completely Liner-moving, machine maintenance has been done, we give 6 months warranty for the machine. Installation and training will be done by our company. Csdpfxow Rpfve Abbohf Features X/Y/X linear motor A/C torque motor Glass rulers Haidenhein 5-piece stone change Eco robot (active) 400 mm helix opening feature All sizes of GunDrill can be connected and sharpened. 3D cutting tool simulation is available.

Condition: new, Year of construction: 2025, functionality: fully functional, The 5-axis laser cutting system from the OPMT brand is a high-tech solution developed especially for the production and re-sharpening of PCD (diamond) and hard metal cutting tools. Thanks to laser processing, high surface quality is achieved without contact, while tool life and precision are significantly increased. The LTR-5AX model is suitable for both mass production and special tool processing needs with its robotic loading option and user-friendly software interface. It is especially recommended for companies processing wood, aluminum and composite materials. The machine is offered in Turkey with the CoreCut guarantee, and installation, training and service support are provided locally. The system, developed by the joint engineering of Joerg and OPMT, is actively used by many manufacturers in Europe. Delivery time: 8–12 weeks Warranty: 1 year Condition: New Price: On request For more information or to get a quote, you can contact us: Emre Özkan – CoreCut Chodpfxewr Tiij Abbsf