Used stirring & mixing equipment for sale (45)

Condition: used, tank capacity: 5,500 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Manhole diameter approx. 390 mm Speed: 1460 rpm Internal diameter: 1,600 mm Kwsdpfx Aoxqbi Sedtet Total height: 4,350 mm Power: 15 kW Agitator: Jet mixer Base type: Height-adjustable feet Location: Bremen Volume: 5,500 liters Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 2,500 mm Last use: Lubricant production TANK Number of feet: 3 pcs EQUIPMENT Manhole / Dome: located in the top head Outlet: available Note: slight residues MATERIAL SPECIFICATION Material of feet: Stainless steel AGITATOR 1 Agitator manufacturer: Fluid Voltage: 380 volts Agitator positioning: eccentric in the top head

Condition: used, tank capacity: 1,100 l, GENERAL Design: suspended Remarks: Former mounting pads were cut off during dismantling and are no longer available; one heating connection was cut off; vessel shows significant residue build-up Speed: 274 RPM Outer diameter: 1,090 mm Inner diameter: 1,040 mm Ksdpfx Adsxqbi Eetjwt Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,200 mm Heating/cooling: available Power: 2.2 kW Seal: Mechanical seal with thermosiphon vessel Agitator: inclined blade agitator Location: Bremen Cylinder temperature control: double jacket Volume: 1,100 liters Double jacket material: V2A 1.4301 (AISI 304) Product contact material: V4A 1.4429 (AISI 316) Condition: used Cylindrical height: 1,200 mm Last application: adhesive production HEATING/COOLING JACKET Base temperature control: double jacket EQUIPMENT Manhole / access: on top head (DN 400) Discharge: flange DN40 Note: Manhole cover plated AGITATOR 1 Agitator manufacturer: Stelzer Voltage: 230/400 Volt Agitator positioning: eccentric on top head Agitator details: agitator element partially bent (see photos)

Condition: used, tank capacity: 4,500 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Remarks: Half-pipe coil only in the lower area of the cylinder Rotational speed: 1445 rpm Internal diameter: 1,500 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Overall height: 4,550 mm Heating/cooling: Available Power: 5.5 kW Max. allowable operating overpressure: 6.0 bar Agitator: Inclined-blade agitator Installation type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 4,500 liters Product-contact material: V4A 1.4401/04 (AISI 316) Condition: Used Cylindrical height: 2,390 mm Last application: Chemical industry TANK Number of feet: 4 pcs HEATING/COOLING JACKET Baseplate temperature control: Half-pipe coil EQUIPMENT Manhole/access port: In the cylinder Note: Light residue present Ksdjxqbilopfx Adtowt Outlet: 55 mm MATERIAL SPECIFICATION Temperature control system material: AISI 316 (V4A) 1.4404 Feet material: Stainless steel AGITATOR 1 Voltage: 400 Volts Current disruptor: Agitator arrangement: Centrally mounted in the tank top

Condition: used, tank capacity: 7,085 l, GENERAL INFORMATION Design: vertical Remarks: Tank made of standard steel, internally plated with V2A (1.4541); manhole diameter 520 mm; external protective coating on the tank; heavy deposits on the tank interior Speed: 160 rpm Internal diameter: 2,000 mm Total height: 5,050 mm Power: 7.5 kW Top cover: bolted lid Agitator: inclined blade agitator Support type: feet Location: Bremen Nameplate: Capacity: 7,085 liters Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 1,970 mm Previous application: paint industry TANK Number of feet: 4 pcs EQUIPMENT Manhole / dome: on the top cover Outlet: present Kjdexqbg Depfx Adtewt MATERIAL SPECIFICATION Bottom material: steel Shell material: steel Feet material: steel AGITATOR 1 Voltage: 400/690 volts Current breaker: Agitator arrangement: centrally mounted in the top cover

Condition: used, Year of construction: 2012, tank capacity: 400 l, GENERAL Design: horizontal Year of manufacture: 2012 Remarks: 1 sight glass on the cylinder is missing (see photos) Speed: 762 rpm Internal diameter: 800 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 1,950 mm Total length: 1,250 mm Power: 1.5 kW Max. overpressure: 6.0 bar Shaft seal: Mechanical seal without thermosiphon vessel Agitator: inclined blade agitator Mounting type: feet Location: Bremen Technical documentation: drawing, various documents, acceptance certificate, CE marking and declaration of conformity, operating manual Nameplate: Vacuum: 1.0 bar Volume: 400 liters Cylinder wall thickness: 4 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical length: 775 mm Last application: pharmaceutical chemistry TANK Max. permissible operating temperature: 150 °C Number of feet: 4 pieces EQUIPMENT Outlet: 50 mm MATERIAL SPECIFICATION Material of feet: stainless steel AGITATOR 1 Agitator manufacturer: Mut Tschamber Kwsdpfoxqbcfox Adtst Voltage: 220/380 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator arrangement: mounted on the tank Agitator equipment: Technical documentation for the agitator available

Condition: used, tank capacity: 22 l, GENERAL Design: upright Speed: 32 - 150 rpm Heating/Cooling: available Power: 0.37 kW Max. permissible operating temperature: 120 °C Max. permissible operating overpressure: 4.0 bar Agitator: anchor agitator Agitators: 2 agitators Agitator element: homogenizer Mounting type: frame Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 22 liters Double jacket volume: 2.0 liters Condition: used Kedpfxexqbb Io Adtowt Last application: cosmetics VESSEL Max. permissible operating temperature: 99 °C Bottom: conical bottom AGITATOR 2 Agitator configuration: bottom-mounted AGITATOR 1 Voltage: 380 volts Agitator configuration: central, top-mounted Agitator equipment: anchor agitator with Teflon scrapers; the drive power of 7.5 kW indicated on the nameplate presumably refers to the homogenizer.

Condition: good (used), Year of construction: 1994, Manufacturer: ZANCHETTA Machine type: GV 50 Rotomix Kwjdpfjnp Hrqsx Adtot Year of manufacture: 1994 Capacity:50 liter Minimal operating capacity: 12 liter Maximal operating capacity: 33 liter Inside depth: 450mm Inside height: 320mm Weight: 850 kg Parts of machinery: 1.Roto mixer Granulator 2.Oil dynamic unit 3.Vacuum / condensation unit 4.Heating unit

Condition: good (used), DIOSNA P250 A Mixer / Granulator with Heating Jacket This mixing unit, with a capacity of 245 liters, is designed for intensive mixing and dispersing of powders or granulates. Additionally, free-flowing materials, including liquids, can be processed. The heating jacket is brought to the desired temperature using an external heating source. Kwsdpfx Adox Anufstst Manufacturer: DIOSNA Year of manufacture: 1988 Space requirement: 250 x 130 x 260 cm

Condition: like new (used), Year of construction: 2013, This floor-standing machine is designed for mixing a large number of dry products. Thanks to the planetary motion of the mixing tool, intensive and homogeneous mixing is achieved. The system consists of a stainless steel vessel—material 316L, mirror-polished, Ra < 0.8 µm—and a stainless steel housing, in which the vessel lid with the integrated mixing units and drives is installed. The mixing vessel has a capacity of approximately 90 liters (usable volume approx. 30 to 60 liters) and is placed and clamped onto two arms. The mixing material is filled in, after which the vessel is raised hydraulically, causing the mixing tool to immerse into the product. The mixer is equipped with a 45° spiral-shaped stainless steel mixing tool; the speed can be regulated via a gearbox. The mixing speed is adjustable—48, 82, 135, and 231 rpm. Vessel discharge is performed via a centrally located bottom outlet. Operation and control, including recipe and batch management, is performed via an operator panel on a separate stainless steel control cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-protected) areas. Kwjdpsx Antuefx Adtot Electrical configuration: 230/400V, 3-phase, 50 Hz, IP55 Space requirement: 90 x 130 x 235 cm Weight: approx. 850 kg

Condition: used, tank capacity: 16,000 l, GENERAL Equipment: Crane lugs Design: vertical Speed: 19.9 rpm Inner diameter: 2,480 mm Total height: 4,900 mm Power: 5.5 kW Agitator: beam agitator Support type: legs Location: Bremen Technical documentation: drawing Nameplate: Volume: 16,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,000 mm Last application: water-based paint TANK Number of legs: 3 pcs Kwedpfx Aexqbplodtst EQUIPMENT Manhole / dome: in cylinder, in top head (DN 500) Outlet: flange DN125 Note: slight residues, dents on cylinder MATERIAL SPECIFICATION Leg material: stainless steel AGITATOR Voltage: 380 Volt Bottom bearing: Agitator arrangement: centered in top head

Condition: used, tank capacity: 6,100 l, GENERAL INFORMATION Equipment: Level indicator (without guarantee) Design: vertical Remarks: Piping inside the tank (see photos); Manhole diameter approx. 400 mm Internal diameter: 1,990 mm Total height: 2,800 mm Support type: height-adjustable feet Location: Bremen Volume: 6,100 liters Cylinder wall thickness: 2.5 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 2,000 mm Kwodpfx Adexqbirotjt Last application: CIP tank in a brewery TANK Number of feet: 4 EQUIPMENT Manhole / Dome: in cylinder Outlet: flange DN50 MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Head wall thickness: 2.5 mm

Condition: not inspected (used), Volume: Approx. 6000 L Kwjdpfxshg Niqe Adtot Type: Standing on three feet Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank

Condition: not inspected (used), Volume: Approx. 6000 L Kwjdpfjhg Nk Dox Adtot Type: Standing on three feet Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank

Condition: ready for operation (used), General Location Bremen Condition used Tank volume 17,300 liters Max. permissible operating temperature 100 °C Specific weight of medium 1.2 (to/m³) Type of construction upright Stand form Feet Number of feet 4 pieces Kwsdeinvcwopfx Adtst Technical data / dimensions Diameter inside 2,900 mm Cylindrical height 1,800 mm Total height 5,100 mm Wall thickness bottoms 4 mm Wall thickness cylinder 8 mm Equipment Technical documents Drawing,TÜV papers Manhole / dome in the top bottom (DN 600), hand hole Type plate Outlet 50 mm Remark slight adhesions Remarks 1 tank (internal no. 7081-3) with a smaller dent as well as a cut-off connection in the top bottom

Condition: excellent (used), Year of construction: 1985, Universal mixer This compact device in stainless steel design (container/mixing tool) is designed for grinding, mixing, suspending, homogenizing, and evacuating solid, liquid, or soft products (with appropriate mixing inserts) in an extremely short working time. The mixer is supplied with a standard blade, which can be used universally for most products to be manufactured. Additional mixing inserts can be obtained from the manufacturer. Technical data: Capacity: 12 liters Motor power: 1.5 /1.9 kW Motor speed: 420 and 2,800 rpm Additional equipment: • Vacuum-resistant • Vacuum gauge • Vacuum pump • Heatable/coolable container Kwedpfjxrfwijx Adtot • Stainless steel lid with sight glass and scraper

Condition: used, - second hand - location: Bremen - Total width: 1.950 mm Kwodpfxjlyqccs Adtot - Total depth: 1.050 mm - Total height: 1.400 mm - Hot mixer: approx. 10 liters - 5.5 kW - Cold mixer: approx. 25 liters - 2.2 kW - Hot mixer flange closure may be missing and would need to be replaced on site

Condition: good (used), Volume: approx. 68 liters Usable volume: 55 liters Suitable for solid, liquid or soft products Motor power: 2.2 / 4.0 / 5 kW with jacket Mobile / tiltable Kwodpfx Aeuk Ez Ejdtet Parts in contact with product made of stainless steel Manufacturer: Stephan Year of construction: 1987 Floor Space: 120 x 80 x 170 cm

Condition: excellent (used), FRYMA MZM / VK - 50 Cream Manufacturing Plant This Plant with usable volume of 50 L is suitable for manufacturing creams, ointments and suppository masses etc and can also handle foamy products. Total volume: 73 litres Min. fill volume: 10 litres Homogeniser: Brienz RF 112 M - 2 - 4.0kW - max. 2,850 rpm Mixer - scraper: SEW FAF 37 - max. 28 rpm Manufacturer: Fryma Koruma Year of construction: 1998 Kodsuf A Rlepfx Adtewt Floor Space: 120 x 150 x 200 cm

Condition: ready for operation (used), Year of construction: 1995, Net/gross volume mixer: 1500/2000l, useful volume secondary tank: 1790l, motor power: 55kW, length: 4700mm, width: 2500mm, height: 3400mm, weight mixer/ secondary tank:3.9/ 1.21t, with extensive documentation, on-site inspection is possible. Ksdpfx Asrn Rc Dedtewt

Year of construction: 2001, condition: used, Used Stephan Model UM 12 high intensity/universal vacuum mixer. Stainless steel jacketed mixing bowl has total capacity 15 litre, working capacity approx. 12 litre. Bowl rated -1/atmospheric pressure at 95°C max. temperarure. Stainless steel nonpressure jacket capacity 0,8 litre, 95°C max. temperature. Has bottom S-blade type of agitator driven via dual speed el. motor 1.5/1.9 kW, 1420/2810 rpm, 50 Hz, 400 V. The vessel has top entry manual teflon wall scrapper. Integrated el. switchboard with local control panel. Also includes vacuum pump DVP Vacuum Italy model LB.5WR and el. heater Thermo Haake model C10 with circulation pump for heating jacket. Kwedpfelc Etqsx Adtot

Condition: excellent (used), Becomix Stirring & Mixing Tank Kwsdpfx Adex Dnkietet Electric lift lid Scraper and mixer motors 316 stainless steel 3000 lts capacity

Condition: excellent (used), Becomix Universal Homogenising Mixer Model RW3000, Capacity 3000 lts, Complete with piping and control panel. Universal mixer for various cosmetic and pharmaceutical products Application: Low to very high viscosities - For example, creams, ointments, emulsions, toothpastes, gel products, mascara, make-up. Properties: Homogeniser with internal and external circulation, Anchor agitator with scrapers for horizontal and vertical mixing Kwsdpfjx Dnilox Adtst Short heating and cooling times, Hygienic and dead space-free construction, CIP/SIP, ATEX zone 2 to 0 possible, cGMP

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: Ball valve Design: Vertical Speed: 0 - 225 rpm Internal diameter: 1,200 mm Explosion-proof: Motor is explosion-proof (compliance with the applicable ATEX regulations under local conditions must be verified) Total height: 2,400 mm Power: 1.85 kW Max. overpressure: 1.00 bar Agitator: Inclined blade agitator Kwodpfx Aoxqbk Aedtet Support type: Feet Location: Bremen Technical documentation: Drawing Nameplate: Vacuum: 0.50 bar Volume: 1,100 liters Cylinder wall thickness: 4.0 mm Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 850 mm Last application: Pharmaceuticals VESSEL Max. permissible operating temperature: 50°C Number of feet: 4 EQUIPMENT Manhole / Dome: On top head (DN 400) Outlet: DN25 DIN 11851 MATERIAL SPECIFICATION Feet material: Stainless steel AGITATOR 1 Voltage: 230/400 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.0 mm Agitator arrangement: Eccentric in top head Agitator accessories: Agitator documentation available Top wall thickness: 4.0 mm

Condition: used, tank capacity: 550 l, GENERAL Equipment: Venting/inlet and outlet valve, disc valve Design: upright Speed: 190 RPM Internal diameter: 820 mm Total height: 1,850 mm Power: 0.75 kW Top cover: agitator crossbeam with folding lid Agitator: paddle agitator Base type: PE base Location: Bremen Technical documentation: drawing, CE marking and declaration of conformity, assembly instructions, operating manual Nameplate: Volume: 550 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 1,034 mm Kwsdpfoxqbh Ijx Adtst TANK Max. permissible operating temperature: 80°C EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION External surface: marbled Internal surface: high gloss Legs material: plastic AGITATOR 1 Voltage: 400 volts Agitator arrangement: centralized on top cover

Condition: used, tank capacity: 586 l, GENERAL Design: vertical Kodpfx Adsxqbcxjtewt Remarks: Manufactured according to ASME guidelines. Internal diameter: 813 mm Total height: 2,093 mm Heating/cooling: present Insulation: present Max. allowable operating temperature: 204 °C Max. allowable operating overpressure: 6.5 bar Max. overpressure: 2.75 bar Stand type: mobile on castors Location: Bremen Technical documentation: drawing Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 586 liters Double jacket volume: 136.0 liters Cylinder wall thickness: 10 mm Product-contact material: enamel Condition: used Last application: pharmaceuticals VESSEL Max. allowable operating temperature: 204 °C Heads: dished ends (Klopper bottom) Number of legs: 4 HEATING/COOLING JACKET Max. allowable operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 50 mm EQUIPMENT Manway/dome: in top head MATERIAL SPECIFICATION Head material: steel Cylinder material: steel TECHNICAL DATA / DIMENSIONS Head wall thickness: 9.5 mm