Used special purpose machines for sale (118)

Year of construction: 2021, operating hours: 22 h, condition: used, functionality: fully functional, machine/vehicle number: 2100034498, Industrial microwave device see the manual for detalis (uploaded document) Dedpfjymzkiox Ag Dscf

Condition: excellent (used), Year of construction: 2006, LANGHEINZ CONTINUOUS-FLOW WATER CHILLER WKG 90 Cooling Capacity: At an inlet temperature of approximately 17.5°C and a flow rate of 7.5 liters per minute, the extracted ice water has the following temperatures: 10 liters: +1.9°C 20 liters: +2.7°C 30 liters: +3.2°C Peak cooling capacity: 180 liters per hour Continuous cooling capacity: 90 liters per hour Batch size: up to 50 liters with approx. 20 kg ice storage Electrical connection: 230V/50Hz Water connection: 1/2" Dimensions W x H x D: Dcjdpfx Asghrmzeg Dsf 950 x 560 x 530 mm water cooling machine

Year of construction: 2017, condition: new, functionality: fully functional, Universally applicable bridge-type swing-beam cutting machine with lift table. Model: 5300A Designed for the manual cutting of sheet and roll materials. Machine configuration includes the following components: • Model 5300A / 1600 x 800 / 800 kN • Blade holder rails for fixed sheet width mounted on the bridge • Plastic cutting pad, type HY 78 Additional equipment: • Automatic die shifting device • Unwinding unit with powered feed for roll materials • Material hold-down device mounted at the table infeed for securing roll material during cutting • Laser material positioning device with 4 cross lasers Dedpfxsyly R Es Ag Dscf • 1 spare cross laser Automatic die shifting device Material hold-down device mounted at the table infeed for fixing roll material during cutting Unwinding device with motorized feeding for roll materials Laser positioning system with 4 cross lasers and 1 spare laser Technical data: Cutting force: 800 kN Table area: 1600 x 800 mm Table height, approx.: 1000 mm Max. material passage height: 190 mm Stroke, adjustable: 15 – 165 mm Adjustable stops: 40 mm Height of safety light curtain: 750 mm Machine weight, approx.: 5,100 kg Hydraulics and drives: Bridge travel drive power requirement: 1.5 kW Bridge travel time, approx.: 2 sec. Closing speed: approx. 90 mm/s Cutting speed: 33 / 5.5 mm/s Return speed: approx. 52 mm/s Hydraulic motor power: 4 kW Oil requirement: 200 l (ISO VG 46) (The required quantity of oil is not included in the delivery.) Plastic cutting pad: Quality: HY 78 natural Shore hardness (D): 78 Dimensions: 1600 x 800 mm Pad thickness: 10 mm Material: polypropylene

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, 3 production and assembly lines for rims (e-bikes) Dcjdpewulrbefx Ag Dsf

Condition: as good as new (ex-display), Universal balancing machine on a horizontal rotating axis bed with belt drive, bearing capacity up to 700 kg, which can be additionally equipped with rotor drive from a headstock by means of cardan shaft. The machine makes it possible to balance many types of rotors such as engines, paper machine shafts, fans, pumps, spindles and many other machine subassemblies. The balancing process is controlled by the latest measuring system "ROTORTEST 9.5" with dedicated software equipped with workshop programs converting unbalance into convenient correction method, e.g. into drilling or milling parameters. The greatest advantages of this type of balancing machine are its universal application, high measurement accuracy, simple and quick calibration method, so called "manufacturer's calibration", which does not require calibration runs before starting the measurements. The whole procedure consists only in entering the basic parameters of the rotor into the program. The machine is an excellent choice for balancing single units of various rotor models as well as large series of the same rotor model. The machine ensures high balancing accuracy and short cycle times. Highest quality components of worldwide recognised brands are used in the production of the balancing machine. The proposed machine is a demonstration machine, however its operation and appearance is in perfect condition Parameters: Dedsf Nvwhspfx Ag Djcf Maximum rotor weight - 700 kg, Maximum diameter over the bed - 1700 mm. The maximum length of the rotor - 2500 mm [...]

Year of construction: 2026, condition: new, functionality: fully functional, Purity: 99.999 Capacity: 21.3 m3/h Dsdpfxexn Upye Ag Dscf

Condition: as good as new (ex-display), Compact balancer with vertical spinning axis and load capacity up to 50 kg. Thanks to its compact design, the machine takes up relatively little space and does not require foundations, so it can be easily relocated to the desired location. The balancing process is controlled by the latest measuring system "ROTORTEST 9.5" with dedicated software equipped with workshop programs, which convert the unbalance into a convenient correction method, e.g. into drilling or milling parameters. Vertical axis balancing machine is recommended for balancing rotors mounted on a bore, e.g. fan rotors, pulleys, flywheels, tools, pumps and many others. The biggest advantages of this type of balancing machine are its universal application, the possibility of using dedicated self-centring chucks giving high measuring accuracy, simple and quick calibration method, so called "manufacturer's calibration", which does not require calibration runs to be carried out before starting the measurements. The whole procedure consists only in entering basic rotor parameters into the software. This machine is an excellent choice for balancing single pieces of various rotor models, and in particular for balancing large series of the same rotor model. Parameters Maximum rotor weight - 50 kg Dcjdpjf Nvwpjfx Ag Dsf Maximum rotor diameter - 650/850 mm Maximum rotor height - 500 mm

Condition: new, Equipment: dust extraction, For all industrial processes where dust and coarse particles are generated, the clean air dust extractors of the AL-KO CLEAN UNIT D series are the right choice. Thanks to their powerful fans and highly effective filter cartridges, these mobile extraction units ensure clean air in metalworking as well as in the plastics, food, and chemical industries. Functionality: Dust and coarse particles are extracted directly at the machine or via capture hoods and conveyed through a suction line to the inlet of the AL-KO CLEAN UNIT D. In a generously dimensioned pre-separation chamber, coarse particles are separated. The downstream filter cartridges of dust class 'M' filter out the remaining fine dust particles. The differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges even during continuous operation. Venturi nozzles on the filter cartridges enhance the cleaning effect, ensuring consistent suction power and a long filter service life. The collected dust is gathered in an easily maneuverable container with an integrated collection bag, enabling low-dust disposal. The purified air is returned to the workspace via the top of the unit. Applications: - Direct extraction of dust and chips - Suitable for single or multiple workstations - For connection to machines, extraction tables, booths, and ducting - For metal and plastics processing and many other industries - For grinding, polishing, filling processes, and more Advantages: - High suction performance due to an efficient fan and cleanable filters with a long service life - Suitable for a wide range of applications - Extremely quiet thanks to highly effective sound insulation - IE3 motors for high energy efficiency Dcodjwwkrfspfx Ag Def - Plug-and-play

Year of construction: 2018, condition: good (used), We sell a Klepp gas filter unit according to ATEX "e" II 3 G. The solution for permanent, optimal extraction and filtering of gaseous pollutants. Dcodsm Ak Rmopfx Ag Dsf

Condition: good (used), Year of construction: 2013, 4 piece diode laser system, Limo Diocut 1300 - second-hand - : Price per piece ex location: 1.950.-€ (net)! Manufacturer: LIMO (Lissotschenko Mikrooptik) Type: Diocut 1300 Year of manufacture: 2013 400V, AC +/- 10% 50/60 Hz Dsdpfx Agjumi Ste Docf I < 16A, 3 phase, + N + PE Condition: good, Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: Dsdewhdnhspfx Ag Djcf The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: used, Year of construction: 2007, operating hours: 1,234 h, functionality: fully functional, machine/vehicle number: 65020107, Equipment: documentation/manual, Hello. My profession is picture framing. A few years ago, I retired and have decided to sell the machines I no longer need. One of them is a BVP 65 E /380 Biedermann vacuum laminating press - 1.80x1.30 m. I mostly used it to laminate posters, which I would then frame. However, you can also laminate graphics, drawings, photographs, silk, and batik. Dcjdpfxex Dq A Io Ag Dsf The image is bonded to MDF in the machine using heat and pressure with a special film. At the same time, a laminating foil is applied to the image. The finished product is protected not only against dirt but also against UV radiation, and it is overall very lightweight. The lamination surface can be smooth or textured like canvas. Pictures with a textured surface look like they were painted on canvas. Various laminating films are included in the price—see the photo. The vacuum press is in good technical condition. Thank you for your response and have a nice day.

Year of construction: 2024, condition: new, Langut transport trolley Basic length 2900 mm support to support Max. length Length telescope 6000 mm Dedpfxshbm Iho Ag Djcf Payload 4000 Kg Width between stanchions 1220 mm Rungeb to fold with pin Storage support for stanchions on telescopic tube Transport fixture for load forks and forks Steering wheel with parking brake Painted in RAL 2000 and RAL 7021

Condition: good (used), functionality: fully functional, machine/vehicle number: 003128, empty load weight: 200 kg, Year of construction: 2003, Hello. I have a profile wrapping machine from Ruchser for sale. The machine is 100% operational and comes with roller tables. It is capable of simultaneous wrapping of the profile on three sides. If you have any questions, please contact me. Dcedjx Tpgyspfx Ag Def

Condition: excellent (used), Year of construction: 2022, operating hours: 95 h, functionality: fully functional, For sale: Complete industrial microwave generator system from MUEGGE GmbH (Germany), 30 kW at 915 MHz, in excellent condition with very low operating hours. This package includes the full WR975 high-power waveguide assembly, making it ideal for industrial heating, drying, food processing, chemical applications, and R&D environments. Dsdpfxsx Ex Dro Ag Dscf Technical Specifications Microwave Power Supply: • Output power: 30 kW • Frequency: 915 MHz • Input: 3 × 400 VAC, 50 Hz • Control interface: CAN • Colour: RAL7035 • Included: 10 m CAN cable Magnetron Head: • Power rating: 30 kW / 915 MHz • Waveguide interface: WR975 Included Waveguide Components: • 100 kW circulator, WR975 • WR975 waterload • Detector diode (for forward/reflected power monitoring) • 20 dB attenuator, Type R 412 720 Documentation: • Complete English instruction manual and technical documentation provided on USB stick. Condition: • Excellent – barely used • Fully functional and tested • Located in France • Ready for immediate dispatch Applications: • Industrial microwave heating • Drying and dehydration processes • Pasteurisation and food treatment • Chemical and materials processing • Research and development Original New Price: • €109,000 (manufacturer reference) Asking Price: • Negotiable, subject to shipping and inspection

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: 0963, Oven used for sinter paste drying and subsequent cooling of printed half-bridges Dcodpfx Agoxm Ri Hs Djf

Year of construction: 2004, condition: good (used), coil, coil edge guide Dcodpommc Uiefx Ag Dof brake load cells 12 holographic spool unwinders hot stamping unit cooling suction hood with collection bag boiler refrigerator electrical panel operator panel

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2 h, functionality: fully functional, machine/vehicle number: LM 500 W6-P, Due to lack of use, a Plasmek Plastic Makinalari LM500 W6-P laminating machine is for sale. The machine has virtually 0 operating hours and has not been used. All parts and accessories are included. Special offer: now only €39,500. Dedpfsw H Rpvox Ag Decf

Year of construction: 2026, condition: new, functionality: fully functional, AVANTECHNO 411 is a professional mobile system for line boring and internal build-up welding, designed for precision restoration of worn cylindrical bores and pivots directly on site. The system integrates boring, internal welding (overlaying), facing, drilling, and thread cutting into a single portable unit. The equipment is mounted directly onto the workpiece, allowing on-site repair without the need for disassembly or transportation of heavy components. The coaxial centering system ensures high concentricity when restoring spaced bores. Technical specifications: Dcsdpoyq Rldofx Ag Dof - Boring diameter range: Ø 22 – 400 mm (up to 1,000 mm with additional kits) - Internal build-up welding range: Ø 25 – 400 mm - External build-up welding range: Ø 20 – 250 mm - Accuracy: up to 0.01 mm (H7 tolerance field) - Feed rate: 0 – 0.5 mm/rev - Maximum spindle speed: up to 450 rpm - Continuous feed travel: 250 mm (extendable via bar length) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 3 kW - Operating temperature range: −30°C to +40°C - Weight of electromechanical module: approximately 42 kg Functional capabilities: - Single-pass coaxial restoration of multiple aligned bores - Internal hole welding with continuous spiral overlay technology - Facing of flanges and mounting surfaces - Restoration of bearing seats and circlip ring grooves - Restoration of blind bores - Quick change of boring bar with welding shaft without the need for re-centering Applications: Suitable for maintenance and repair of: - Excavators, loaders, and construction equipment - Mining machinery and processing equipment - Agricultural machinery - Cranes and lifting equipment - Industrial and heavy mechanical assemblies Advantages: - On-site repair without disassembly - Significant reduction of downtime and transport costs - Compact and portable design - Manufactured in the EU with a 24-month warranty - Engineered for heavy-duty industrial applications

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, input voltage: 220 V, overall weight: 50 kg, warranty duration: 24 months, AVANTECHNO 611 is a heavy-duty mobile line boring and internal welding system, designed for precise on-site restoration of worn cylindrical bores and pivot joints. The machine combines boring, internal welding, facing, drilling, and thread cutting in a single portable unit. It mounts directly onto the workpiece, allowing repairs without dismantling heavy components, while maintaining precise coaxial alignment of multiple bores. Technical specifications: - Boring diameter range: Ø 62 – 600 mm (Ø 32 – 1,000 mm with additional kits) - Internal welding range: Ø 350 – 1,000 mm - Accuracy: up to 0.01 mm (H7 tolerance) - Feed rate: 0 – 0.5 mm/rev - Maximum bar rotation speed: up to 300 rpm - Continuous feed travel: 300 mm (extendable) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 2.5 kW Dedpfx Asyq Rivog Dscf - Weight of electromechanical unit: approximately 50 kg Applications Suitable for repairing: - Excavators and construction machinery - Mining and industrial equipment - Agricultural machinery - Cranes and lifting equipment - Heavy-duty mechanical assemblies Advantages: - On-site repair without disassembly - Reduced downtime and transport costs - Portable and robust construction - Manufactured in the EU with a 24-month warranty - Designed for heavy industrial applications

Condition: used, Year of construction: 2018, functionality: fully functional, Internal dimensions 380 x 6800 mm Dcjdpfx Agew Ud Aqe Dof

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: ALBA 350 kg/h, Steam generator 350 kg/h, 245 kW, gas burner. Incl. water treatment. Dedpfxow Ud Ele Ag Dscf

Year of construction: 2007, condition: used, functionality: fully functional, Metalchem MDI-300 two-stage intensive mixer Dcodpfxsqy H Eis Ag Def

Condition: new, Year of construction: 2023, Turning equipment to be installed in multiple types of installations. For turning large and heavy parts. Djdor Hbu Eepfx Ag Docf

Condition: as good as new (ex-display), Year of construction: 2015, Ultrasonic Cleaning System It is designed for 10m long heat exchanger with 1.5m diameter and weight of 30 tons. Together with internal mounted rollers and quick chemistry heating system, it is perfect for cooperation with demanding clients. Applications for the use of ultrasonic units - Industrial cleaning - High-pressure cleaning - Petro-chemical activities - Shut-down cleaning activities - Other cleaning where Year of production: end of 2015 Total working hours: 135 for diesel generator, about 40 for ultrasonic transducers Dodpfx Agsuigpmo Djcf From the beginning It was stored in warehouse in perfect conditions All other technical information and price can be sent upon request. This technology is highly recommended for cleaning heat exchangers but also for small parts which high pressure methods can damage. It reduces the periods of shutdowns while cleaning, saves water and sewage.