Holzkraft sc 2 classic for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
3
ST combined 3 classic F 23 - saw milling machine With pivoting blade, pivoting Milling spindle and Formatschiebeschlitten made of anodised aluminium Stable steel-cast iron construction Large support surface and precise cast iron table High-precision format carriage made of anodized aluminum (route 2250 mm) Big boom (900 x 600 mm) with retractable aluminium telescopic fence Max blade Ø 315 mm before crack device, adjustable from 90 °-45 ° Saw RIP fence with fine adjustment Sturdy saw un... more
5
New machine Built 2017 Cutting plane directly at the rolling table Precision-guided aluminium format slide, anodized as standard Large table boom can be shifted longitudinally Isfdzbjlw Standard with parallel stop, round rod guide and fine adjustment Large work table made of milled grey cast iron Quiet running and precise cuts The standard table widening and table extension allow easy work with larger workpieces The large-sized grey cast iron saw unit is double-attached to the casting table and... more
1
««««» Products» woodworking» wood power» wood power» saws SC 3 classic - series miniature circular saw Cutting plane directly on the roller table Precision-guided format carriage made of aluminium, anodised as standard Large table boom telescopic arm out and longitudinally movable Extendable aluminium telescopic stroke, angle adjustable with professional stop flaps RIP fence with quick-clamping and adjustment The standard extension of table and extension table enable easy work with larg... more
1
- NEW - Fabikat Holzkraft/SCM Type SC 3 classic 23 - with swiveling saw blade and high-quality sliding carriage Made of anodized aluminum - Cutting plane directly at the sliding sled - Heavy steel gray cast construction - Precision-guided format sliding slides made of aluminum, standard anodized - Large table boom on telescopic arm guided and longitudinally displaceable - Extensible aluminum telescopic stop, angle-adjustable with professional flaps - Parallel stop with quick release... more
1
Miniature circular saw with tilting blade and high quality Formatschiebeschlitten in anodised aluminium Average level of small saws directly on the roller table Precision-guided format carriage made of aluminium, anodised as standard Large table boom telescopic arm out and longitudinally movable The standard extension of table and extension table enable easy work with large work pieces The large-sized saw unit of grey cast iron is attached to the cast table twice and is a guarantor of stabi... more
6
Vehicle - Make: Manitou - Type: MLT625-75H ST3B Classic - Drive type: Diesel - Load capacity: 2500kg - Load center: 500 - Lifting height: 5900 mm - Reach: 0 mm - Built: 2017 - Engine hours: 400 - Internal No:: 3097 _____ Mast data - Mast type: Telescope - Lifting height: 5900 mm - Height: 2000 mm - Free stroke: 0 mm - Fork carrier: 0 mm - Forks: 0 x 0 x 0 mm _____ Dimensions ... more
6
max. Durchlaßhöhe : 150 mm Schleifbandlänge 1. Aggregat : 1900 mm max. Arbeitsbreite : 1100 mm Bandanzahl : 2 1. Aggregat: : Stahlwalze Be0uhcnlku Schleifbandbreite 1. Aggregat : 1120 mm 2. Aggregat: : Kombiaggregat Ausführung 2. Aggregat : Walze/Schuh Schleifschuh 2. Aggregat : Elektronikschleifschuh Schleifbandlänge 2. Aggregat : 1900 mm Schleifbandbreite 2. Aggregat : 1120 mm Reinigungsbürsten : Ja Steuerung : Bildschirmsteuerung Elek./pneu. Bandoszillation : pneumatisch Tischhub : e... more
13
Table mill SCM / HOLZKRAFT minimax t45 classic Be0o7gpeq0 used, year of constr. 2013 with 4-roller-feeder HOLZKRAFT Milling shaft 30 mm Useful height of milling shaft 100 mm Height adjustable by hand crank Max. Tool diameter milling 210 mm Max tool diameter slots 275 mm Speed 3500-7000-10000 rpm Power milling motor 4 KW Feed unit with clockwise and counterclockwise rotation, 2 speeds each Extractable workpiece support Table dimensions 580 x 1000 mm + extensions left / right each... more
8
Combi 4 x wood power CU 410 c F 26 N Tersa -Technical data- -Circular saw- Be hem length 2,600 mm maximum saw blade Ø 315 mm maximum cutting height at 90 ° / 45 ° 100 / 79 mm maximum drop length width left of the saw blade 2,310 mm cutting width on the parallel fence 900 mm saw blade tilt 90°-45 ° - set off -. Working width 410 mm dressing table length 1,660 mm Planer shaft Ø / number cutter 72 mm / 3 PCs. -Thickened- Table dimensions 410 x 605 mm min/max height 3 / 230 mm max Spananahm... more
7
Swivel milling machine type 245 classic Solid base and highest level of quality. Are consciously on electronic controls and functional elements, the series easy, medio and ultimo to find classic does not have the swivel milling machine 245. Manual dials and analog display are combined here with high-quality materials, careful production and maximum functionality. For businesses with a low throughput a good choice - is guaranteed the 245 classic. -Swivel range-5 to + 45 ° -RPM 3000/4500/6000/... more


holzkraft ...
daily

New machines via email!

Stay updated!
1
Camuvhfs I can offer you a SPS cylinder printing machine Vitesse Classic G2 complete with Mabeg feeder, print size 72cm X 102 cm. Outlet height 950mm. The price is with Feeder Mabeg M7, the Feeder only has streamfeed, without single sheet operation. more
4
thermal CtP Heidelberg Topsetter 102 Classic Model 2310 with Single Cassette Loader Model 2311 and Xitron Raster Blaster age 2000/2001 max. plate size 1060 x 940 mm min. plate size 650 x 550 mm resolution 1200 - 4000 dpi thermal laser 830 nm 32 Diodes Conveyor Haase OE 41 online processor with stacker and trolley My2pckxa more
1
Grinding unit via a lever up to 45 ° swivelling The machine frame made of welded steel guarantees high torsion stiffness and vibration-free operation. Oscillating abrasive belt with a separate geared motor for better grinding results Oscillation can be activated optionally Grinding sole with graphite coating for a longer life of the sanding belt Height-adjustable grinding table to take advantage of the total width of the sanding belt Height-adjustable auxiliary table with fume control syst... more
6

4-combined machinery Holzkraft CU 300 Classic F 23

Bitburg, GermanyGermany dealership location
6422 km
2019
as good as new (ex-display)
Combi 4 x wood power CU 300 classic F 23 N Vogwugujg -Technical data- -Circular saw- Be hemline 2,250 mm maximum saw blade Ø 315 mm maximum cutting height at 90 ° / 45 ° 103 / 82 mm maximum drop length width left of the saw blade 2,310 mm cutting width on the parallel fence 820 mm saw blade tilt 90°-45 ° - set off -. Working width 300 mm dressing table length 1,510 mm Planer shaft Ø / number cutter 72 mm / 3 PCs. -Thickened- Table dimensions 300 x 585 mm min/max height 3 / 230 mm max S... more
1
Minimax c 26 g TERSA - multiple combination to sawing, milling, Planer thicknessing. The compact universal multiple combination with ALU-Formatschiebeschlitten and TERSA-shaft for the discerning DIY For sawing, milling, surface planing and thicknessing. The desks, heavily ribbed grey cast iron and the base frame made of welded steel guarantee rigidity and vibration-free operation. Unique in this performance class: smooth aluminium Formatschiebeschlitten, anodized, with ball contact system ... more
1
WOOD strength S 400 elite S - professional - format circular saw heavy duty with pre scoring unit and format carriage made of anodised aluminium. · Standard with before crack device with separate ratem drive motor, external adjustable · Smooth anodized aluminium Formatschiebeschlitten · Cast iron saw unit with double Swivel segment Guide (double cradle) and Zero-point rotation · High weight ensures precision and smooth running · 400 mm saw blade, cutting height 138 mm (also with... more
3
Wood power band and disc Sander BTS 200 Compact grinder to edit by faces, edges, and curves Large work tables With Swivel belt loop aggregate 0-90 degrees Quick changing of the sanding belts with quick change system Simple band run setting including miter gauge Grinding diameter: 305 mm Sanding belt dimensions: 152 * 1219 mm Belt speed: 12 m / s Working table cast iron: 315 * 155 mm Work table aluminium: 400 * 225 mm Fqyzsdj Work table rotation: - 15 ° - 0 degrees + 45 degrees... more
5
Technical data: Volume flow: 18950 m3/h. Pressure max: 2950 Pa. Bfeqhjv0k9 Power: 30 KW Speed: 2090 rpm. Machine weight 500 kg Machine dimensions L 1900 mm x W 1300 mm x H 1350 mm more
10

Multi-Spindle Screw Machine Gildemeister GMC20

Oak Forest, United StatesUnited States
914 km
2005
excellent (used)
Gildemeister GMC20 CNC Multi-Spindle Bfglrwxx0b Mfd. 2005 SN: 5101-0116 6-Spindles, 20mm Capacity 2 machines available Equipped as pictured Contact us for more details more
1
2 lasers (RedYellow-Green) 2008 8 colors-Fluorescence Detectors- 8 PMTs in 4-2-2 configuration OR 8 PMTs in 5-3 configuration. The BD FACSCanto II system features many innovations. The optics of the BD FACSCanto II system consist of an excitation source with up to three lasers: blue (488-nm, air-cooled, 20-mW solid state) & red (633-nm, 17-mW HeNe). A third violet (405-nm, 30-mW solid state) laser can be added at an additional cost. Bfb0c3kxv8 Certified before shipping. Warranty: in US 90 ... more
2
Make Thyssen Henschel, Type TK/D 125, No 850026, New 1993 (has never been used), Material Stainless steel 1.4541 (321), Cold mixer "Continuous high speed mixer" (1x), Capacity 7,5 Ltr, Vessel sizes dia. 125mm, Max. temperature 200 Degr. C., With jacket (2,5 Ltr), Working pressure 5 bar, With motor 15,0 KW + 5,5 KW, 500 Volt (Ex), Rotor speed Outer mixing tool 60-2000 Rpm/Inner 1500 Rpm, Mounted on frame , Floorspace 3,5x0,5 M, Total height 1,0 M, Extra Specifications - Easy clean - 2 counter-rot... more
4
Storage view boxes of from various manufacturers, stackable in good condition. Packing unit 48 piece. Only this size Sermc739 A total of about 1.000Stueck available. Storage bin 14/7-2 Dimensions approx. 510 x 320 x 200 mm Ssonderpreis more
1

Schleifscheibenabricht - and roll forming machine Farman FC 250-EX

Cloppenburg, GermanyGermany dealership location
6393 km
2019
ready for operation (used)
Description: Suitable for aligning and profiling diamond and CBN grinding wheels. Technical data: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond/ CBN disc spindle infinitely adjustable 100 - 1000 rpm, connection value of the motor of the Grinding wheel 1.75 kW, grinding wheel transverse stroke 160 mm, grinding wheel longitudinal stroke 120 mm, radius of the grinding wheel 0 - 6... more
4

Shredder ZENO-MASCHINENBAU ZTLL 420x750

Altenkirchen (Westerwald), GermanyGermany
6461 km
2001
ready for operation (used)
Beromoepyw ZENO SHREDDER mit Sondertrichter ZTLL 420x750 Antrieb:7,5 kW. more
15
Technical specifications: Manufacturer Untha Type XR 2000 S Year of construction 2006 operation houers 20713 h Motor 220 kW Type of Hydraulik power unit 7,5 kW Rotor diameter 1100 mm Rotor length 2000 mm Rotor rev count 30 RPM Number of cutting tools 36/12 Cutting plate diameter 130 x 130 x 60 mm Throughput rates: - Municipal waste up to 70 t/h - Bulky waste up to 30 t/h - Commercial/Industrial waste up to 25 t/h Dimension approx. 5.700 x 3.043 x 3.900 mm (LxWxH) Gutrh8b Work p... more
0

Microarray scanner Axon GenePix 4200AL

Pleasanton, United StatesUnited States
3840 km
refurbished (used)
The Axon GenePix 4200AL microarray scanner is a complete system with auto-loader (32 slides) for high through-put microarray scanning. It includes Dell workstation, SCSI card, SCSI cable, software, dongle. Both green and red laser power confirm to Axon spec. Instrument calibrated. Gvwgss With autoload; 4 lasers (red/green/yellow/blue) - CY3 and CY5 Resolution: 5, 10 20, 40, 60, 80, 100 um/pixel Certified. Warranty. more
2
Make Schneider AG Pfäffikon, Type VMT-250, No 9269-1, New 1981, Material Stainless steel 1.4571 (316Ti), Paddle dryer (1x), Capacity 313 Ltr, Trough sizes dia. 600x1000mm, Manhole dia. 350mm, Outlet dia. 150mm, Working pressure vacuum, With jacket (38 Ltr), Working pressure 4 bar, Test pressure 6,5 bar, Shaft can be heated (14 Ltr), Working pressure 4 bar, Test pressure 5,2 bar, Max. temperature 150 Degr. C., Motor ± 5,5 KW, 400 Volt, With variable speed drive , Floorspace 2,6x1,6 M What you c... more
6
Vehicle - Make: Manitou - Type: MLT 625 H 75PS Climate - Drive type: Diesel - Load capacity: 2500kg - Load center: 500 - Lifting height: 5850 mm - Reach: 0 mm - Built: 2012 - Engine hours: 5900 - Internal No.: D080519 _____ Mast data - Mast type: Telescope - Lifting height: 5850 mm - Height: 1920 mm Nmi7h - Free stroke: 0 mm - Fork carrier: 0 mm - Forks: 1200 x 0 x 0 mm _____ ... more
6
Top condition Electric power supply: 230V 50/60 Hz 1ph/N/PE engine: 1 × 450 W 3nmtdfcn Idling speed: 27000 RPM. Control/workpiece clamping: Manual / Manual Clearance height: 125 mm Milling depth: 0-85 mm Swallow size: W-1/2/3/4 Dimensions W/D/H: 680/600/700 mm Weight: 29 kg Location: Off the shelf 54634 Bitburg -free load- more
2
Werkzeugfräsmaschine Hermle UWF 802 M 07-07-109 Lieferzeit: sofort Nummer: 07-07-109 Maschinendaten 0srmqif8 Baujahr: ca. 1991 L x B x H: ca. 2000 x 1800 x 1800 mm Gewicht: ca. 1750 kg Sehr Guter Allgemeinzustand Technische Daten Digitalanzeige : 3-Achsen-NC-Steuerung Hermle Verfahrwege: X – Achse: ca. 500 mm Y – Achse: ca. 430 mm Z – Achse: ca. 400 mm Tischaufspannfläche: ca. 800 x 390 mm Spindel: Drehzahlbereich: ca. 71 – 3550 U/min Werkzeugaufnahm... more
2

Schleifscheibenabricht - and roll forming machine Farman FC 250 W

Cloppenburg, GermanyGermany dealership location
6393 km
2019
ready for operation (used)
Description: Dwkgwq Suitable for dressing and profiling of diamond and CBN grinding wheels. Technical data: Disc recording: HSK 50A, diamond grinding wheel diameter 50-250 mm, Max wheel width 70 mm, Diamond / CBN-discs spindle speed infinitely variable 100-1000 rpm, radius of the grinding wheel 0-R30 mm, Planer disc 180 x 25 x 31.75 mm, Rotary speed of the dressing wheel 200-2000 rpm, oscillating hub of the dressing wheel 0-70 mm, power consumption of the motor of the dressing wheel 0.75 k... more
0

Microarray scanner Axon GenePix 4200AL

Pleasanton, United StatesUnited States
3840 km
refurbished (used)
The Axon GenePix 4200AL microarray scanner is a complete system with auto-loader (32 slides) for high through-put microarray scanning. It includes Dell workstation, SCSI card, SCSI cable, software, dongle. Both green and red laser power confirm to Axon spec. Instrument calibrated. Nnqor With autoload; 4 lasers (red/green/yellow/blue) - CY3 and CY5 Resolution: 5, 10 20, 40, 60, 80, 100 um/pixel Certified. Warranty. more
2
Make Netzsch Mastermix Aldridge, Type PMD-200, No 2002884, New 1992, Material Stainless steel 1.4301 (304), Closed stirring vessel "Polymer Preparation Mixer" (1x), Capacity 1230 Ltr, Vessel sizes dia. 1130x1250mm, Flat bottom, Dished top side , Manhole dia. 300mm, Top connections (6x), Outlet dia. 85mm, Working pressure vac/0,4 bar, Test pressure 1,4 bar, With jacket (150 Ltr), Working pressure 2 bar, Test pressure 3 bar, Max. temperature jacket 95 Degr. C, Vessel 125 Degr. C., With anchor stir... more
10
Max edge length: 2500 mm Max sheet thickness: 2.5 mm steel 0i8ed9zx Manual rear stop up to 500 mm Automatic bending mode with stopover more
6
KAESER screw compressor, Type SM 12T Built in 2012 Be7w8noej7 CE sign, Engine 7.5 kW, Speed 2,930 rpm, maximum operating pressure 11 bar, Noise level 64dB(A), maximum volume flow approx. 1,000 l., Weight approx. 220 kg, Dimensions approx. 640x800 x1,100 mm (WxDxH) Location: From stock 54634 Bitburg more
6
Vehicle - Make: Manitou - Type: MRI 2550+ AC Climate - Drive type: Diesel - Load capacity: 5000kg - Load center: 500 - Lifting height: 25000 mm - Reach: 0 mm - Built: 2017 - Engine hours: 820 - Internal No.: B220319 _____ Mast data - Mast type: Telescope - Lifting height: 25000 mm - Height: 3050 mm - Free stroke: 0 mm - Fork carrier: 0 mm - Forks: 1200 x 0 x 0 mm _____ Dimensio... more
6
Oil mist extraction and filtering, centrifugal separator SARTORIUS type filter crap F21 / 8 Oil mist extraction Volume flow, air flow approximately 1200 m3/h Inlet at the bottom of the filter Ø 150 mm Engine speed 2800 RPM Motor 1,1 kW Power supply 400 Volt, 50 Hz -Metal enclosure -Foam rubber, fabric filter for coarse dirt particles -mounted on frame, height adjustable Dimensions L x W x H 700 x 600 mm Height 2050 mm to 3000 mm Weight 70 kg good condition Z78ovpp2 A perforated ... more
1
2 lasers (RedBlue) / 6 color 2008 upgraded in 2014 BD BioScience FacsCanto II Flow Cytometer comes with 2 lasers (Red/Blue) and Carosol. It comes complete with computer and FACSDiva software. Please contact us for laser customization or regarding configuration of this systems. Certified to BD’s specifications. Besyaj2gil Warranty: 90-day warranty in US. 30 day warranty in Europe. more
2
Make Netzsch Mastermix Aldridge, Type PMD-200, New 1992, Material Stainless steel 1.4301 (304), Closed stirring vessel "Polymer Preparation Mixer" (1x), Capacity 1230 Ltr, Vessel sizes dia. 1130x1250mm, Flat bottom, Dished top side , Manhole dia. 300mm, Top connections (6x), Outlet dia. 85mm, Working pressure vac/0,4 bar, Test pressure 1,4 bar, With jacket (150 Ltr), Working pressure 2 bar, Test pressure 3 bar, Max. temperature jacket 95 Degr. C, Vessel 125 Degr. C., With anchor stirrer "scraper... more
3

Roller leveller SCHUBERT WM 19/24/120-0-4

Eislingen, GermanyGermany dealership location
6689 km
1987
used
material width:120 mm material thickness:0,4 - 4,0 mm no. of straightening rolls:19 straightening roll diameter:24 mm material cross-cut:120 mm² :40 mm bending speed:5 - 25 m/min power requirement: kW Bfdx92clrv weight:0,85 t dimensions (WxDxH):1,2 x 1,7 x 1,6 infinitely variable drive:Stöber more
4
from company task Bfgbygczjf Pressure: 10 bar, Volume flow: 2.25m3/min, Engine power 15 kW Dimensions: Length: 1060mm, Width: 722mm, Height: 1740mm. Still in use. more
1
Table size 1350x800 mm C2m7p7ww Table extension on both sides with extendable frame support Extendable support rail Spindle diameter 30 mm Speeds 3000/4500/6000/9000rpm Swivel range of the milling mandrel -5° to +45° Engine strength approx. 8 kW (subject to changes and errors in the technical data as well as intermediate sale) more
6
Vehicle - Make: Manitou - Type: MT625 - 75H Comfort - Drive type: Diesel - Load capacity: 2500kg - Load center: 600 - Lifting height: 5850 mm - Reach: 0 mm - Built: 2013 - Engine hours: 3600 - Internal No:: 020519 _____ Mast data - Mast type: Telescope - Lifting height: 5850 mm - Height: 1920 mm - Free stroke: 0 mm - Fork carrier: 0 mm - Forks: 1200 x 0 x 0 mm _____ Dimensions ... more
3

Lederschaerfmaschine Müller & Kurth Forma Typ 26

Heidkamp 65, 32609 Hüllhorst, DEGermany
6452 km
excellent (used)
High-quality leather sharpening machine on a sturdy bottom table, 380 V, can be inspected and demonstrated. Riuvzeo more
2
Make Kaspar Schultz Brauereimaschinenfabrik und Apparatebauanstalt, No 6668, New 2010, Material Stainless steel, Open stirring vessel , Capacity 124 Ltr, Vessel sizes dia. 440mm x800mm, Dished bottom , Flat top side , With cover , Outlet dia. 25mm, With jacket 1,6 Ltr, Working pressure 3 bar, Max. temperature -5/20 °C., With propellor stirrer , Motor 0,18 KW, 220-240/380-420 volt, Speed mixing shaft 850 rpm, Mounted on legs , Floorspace 1,2 x 0,8 M, Total height 1,3 M, Weight 160 KG What you ca... more
2

Double Column Press - mechanical SCHULER SA 125

Eislingen, GermanyGermany dealership location
6689 km
1977
used
pressure:125 t stroke:25 fix mm no. of strokes:70 - 700 /min distance between columns:1150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:1150 x 1000 mm hole in the table:900 x 220 mm side window:650 mm ram surface:990 x 850 mm ram adjustment:60 mm material width:250 mm material thickness:2,5 mm 88u7n0usu power requirement:46,5 kW weight:29,5 t Dimensions (WxDxH): m list price: in running function in our warehouse: German Safety: permitted for automatic mode: i... more
6
Doppelschleifbock, double-sided belt Sander, belt sander Manufacturer GREIF type DV 25/2 Fabr. No. 164631 Grinding wheel diameter: 250 mm Shaft diameter: 20 mm Disc distance: 600 mm Band dimensions: 2000 x 50 mm Engine power: 1,3 kW Engine speed: 2820 R.p.m. Power supply: 380 v, 50 Hz -Contact roller for belt sander with polyurethane coating Ø 200 mm, 50 mm wide -Dust Extractor flange ø 90 mm Bdesgi0r7u -Band grinding arm is left completely and with protective housing -Band grindin... more
15
Horizontal bale press Dixi 60 SLS Nr.2, semi-automatic, press power 60 t, year of construction 2013 Technical specification Manufacturer Dixi, Bermatingen Type 60 SLS Year of construction 2013 Filling aperture 990 x 1100 mm (WxH) Driving power 11 kW Press power main press 60 t Press cycle (average) approx. 27 s Zvvhccbb Binding 3-fold, manual Bale size 1100 x 800 x 1200 mm (WxHxL) Bale weight approx. 370 – 450 kg Machine dimension 4.860 x 2.240 x 2.130 mm (LxHxW) Machine weight app... more
4

Cutting mill Piovan Schneidmühle Piovan Typ RN 2045

Zuzenhausen, GermanyGermany dealership location
6602 km
ready for operation (used)
Power: 7.5 kW 3-knife rotor Number of rotor blades: 3x 9 offset arranged 2 stator knife rows Rotor diameter: 200 mm Rotor width: 450 mm Inlet cross-section: approx. 450 x 225 mm Weight: approx. 600 kg Drive motor: 7.5 kW (machine number: 10994 / used machine) Bfglu9uvwm more


holzkraft ...
daily

New machines via email!

Stay updated!

to

to

Edit search
HOLZKRAFT SC 2 CLASSIC
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.