Bandsawing machine

JAESPA Comfort 420 A

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Nedpfxow A H T Ae Ac Ield Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Nlsdpfxjul Svls Ac Ied Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Nedjxp Rb Iepfx Ac Isld

Condition: excellent (used), functionality: fully functional, maximum load weight: 2,500 kg, lifting height: 17,000 mm, Year of construction: 2022, operating hours: 1,522 h, This unit is in very good condition – operated exclusively by our staff. When buying from the exclusive distributor, you are assured of the quality of the machine, as well as guaranteed spare parts and service support. A presentation or rental can be arranged on request. Key equipment details: The M250 model is currently the most popular crane in Poland for aluminium joinery installation above 10 m. It stands out among competitors primarily due to: - More powerful YANMAR diesel engine compared to the popular Maeda mini crane - Fully hydraulically telescoping jib ready for immediate use - Radio remote control as standard (brand: Scanreco, renowned in top-class machines worldwide) - Horizontally extending tracks (in competing models, the tracks extend at a 45-degree angle, which increases the crane’s height at maximum width) - The strongest searcher hook available for the main boom on the market (2000 kg) - Rope reeving attachable to the boom as needed. If the rope block is not required (work with the searcher hook), the end of the rope is secured to the side of the main boom. - Very compact design (all cables and sensors are integrated inside the boom) This listing is for a BG Lift M250 mini crane including equipment: • 900 kg winch (65 m) • Electric motor (single phase – 220V) • Hydraulic jib • Searcher hook (for the jib) • Pulley block (single rope) • Pulley block (triple rope) • White tracks Engine hours (diesel): 11,522 Engine hours (electric): 321 M250/2 Nsdpfswnd Nljx Ac Iold

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Nlsdpfxohwrk Ts Ac Iod Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Nedjig T Amopfx Ac Ijld Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Year of construction: 1997, condition: used, machine/vehicle number: 540897, pipe diameter max. 1,500 mm tool diameter max. 200 mm feed rate 40 mm / min sawing of pipes in steel and greycast iron  with wall thickness of up to 22 mm  milling of pipes in steel and grey cast iron with wall thickness of up to 15 mm Nlsdpfx Aeghy Azoc Ijd cutting speed 35 m / min compressed air requirement 6 bar - 2m³ / min weight approx. 90 kg

Year of construction: 2014, condition: good (used), The Elumatec SBZ 130 is a 3-axis profile machining center designed for efficient processing of aluminum, steel, and stainless steel profiles. All operations, such as milling, drilling, and threading, are performed on a stationary profile, which protects its surface. - Axes: 3-axis control, with a tool spindle as an additional axis. - Machining length (X-axis): 7200 mm - Travel (Y-axis): standard 485 mm (Vmax. 60 m/min) - Travel (Z-axis): standard 340 mm (Vmax. 60 m/min) - Spindle speed: standard 6000 rpm, optional high-speed spindle (18,000 rpm) - Spindle power: 5.5 kW - Tool magazine: integrated revolving tool head for 8 tools or 4 angled heads, ensuring short tool change times - Control: Windows operating system with eluCam software; 18.5" PC panel, with USB ports and network connection - Clamping system: automatic positioning of pneumatic clamps - Compressed air supply: 7 bar MACHINE: Prepared tooling dedicated to PVC and steel processing: Nlodsyt H Uyspfx Ac Iod - Tool holders, - Reducer for steel processing, - Special tools with chip breakers, - Dedicated programs for processing door profiles. The head was replaced in 2025.

Condition: new, Year of construction: 2026, Robotic gantry system for metal sheet and profile cutting 3D robotic gantry system for plasma and oxy-fuel cutting has double-side drive, precise positioning system by racks and pinions on the 3 linear axes with exceptional speed and dynamics. Zero-backlash on the 3 rotational axes allow 4-side machine processing of profiles and round tubes. Precise gearboxes with minimum backlash, dynamical engagement of the motors to the racks, and rigid guide system allows smooth movement, excellent cut quality of corners and small holes. The gantry system has a cantilevered part crossbeam, which allows profile cutting in a cabin especially designed for this purpose. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 1500 mm Beams and profiles types: T, L, H, U, rectangular tube, round tube Maximum dimensions of beams: Width up to 1200mm Rectangular tubes: Cross-section up to 600x600mm KEY FEATURES ▪ Stable metal construction with precise linear guides and servo-drives with racks and pinions on all axes; ▪ High dynamics, on all X, Y and Z axes: up to 30 m / min speed and acceleration up to 3 m / s²; ▪ 3D control on seven axes allows for a higher level of CNC programming; ▪ Maximum use of machine resources, thanks to the concept of combined processing of sheets and profiles - the ability to 100% load the machine when switching between sheets and profiles, without downtime for loading sheets and profiles and unloading cut parts ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request Njdoh I Nw Depfx Ac Ijld ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Condition: good (used), Year of construction: 2012, Machine is in good working condition. Nljdpfxsylx Hrs Ac Ied