Condition: excellent (used), Year of construction: 2005, Ref: 11098 . 2005 Muller Martini ‘Corona CC-12’ EVA / PUR High Speed Perfect Binder. Excellent condition! Only 36,800 hours worked! Comprising: 36 x 3695/24” top loading feeders with sequential stop/start + handfeed station ‘ASAC’ copy control system with 3714 downstream shut-off element Jogging unit 3643 and Spiral Raceway element 3641 Fgsdpfx Ansy Ib S Rexof M.M. automatic motorised make-ready with “Commander” Control System. Programmable with data retrieval, menu-guided set-up and on-the-run adjustment Book transfer section with 25 kW drive motor M.M. ‘Corona CC12-23’ with 22 x 23” Combi-clamps Spine preparation units with cutting/milling/sanding/brushing Interchangeable spine gluing units, comprising; ICS30 EVA hot-melt side glue pre-melt tank 30 ltr. ICS80 EVA hot-melt spine glue pre-melt tank 80 ltr. PUR pre-melt unit PUR spine glue unit EVA hot-melt spine glue unit EVA hot-melt side glue unit Stream cover feeder with nipping Lay-down delivery unit to: Flat conveyor system (details on request) to: NO TRIMMER (trimmer can be found and added) Specification: 3695/24" Gatherer - sig. sizes, Max: 500 x 320 mm Min: 140 x 100 mm CC12/24” Binder book sizes, Max: 510 x 305 mm Min: 140 x 100 mm Book thickness : 3 -- 60 mm Clamp opening, Max: 80 mm Open cover width : 203 - 642 mm Mechanical speed, Max: 12,000 cycles/hr.

Condition: excellent (used), Year of construction: 2003, Ref:11111. 2003 Kolbus Publica KM410.C High speed perfect binding line. Comprising; 32 x stream feeders with extended infeed for log loading 32 x ZU804 gatherer with interchangeable top-loading feeders for folded sections and single sheets Hand feed station Automatic thickness control AS 800 reject station for over or incomplete books with length & width monitoring Raceway/transfer with vibrate unit Publica binder type KM410.C with 21 x 18'' clamps with ‘Co-Pilot’ Milling/brushing, equalizing milling, ‘Micro’ notching & brushing units Nordson Durapail PUR pre-melt unit Fsdpfezb Rgcjx Anxegf Nordson PUR nozzle system spine glue LH370 EVA pre-melt units EVA hot-melt spine glue tank EVA hot-melt side glue unit I.R. heating in radius for increased glue open time SAL410A Stream cover feeder with four-line scoring Cover nipping/pressing station Delivery system with lay-down device and reject station Conveyor system including cooling tower to; Kolbus HD151.P pile trimmer with ‘Co-Pilot’; Rima RS-3310S compensating book stacker to; Specification: Book size, Max: 420 x 290 x 65 mm Max: 420 x 305 x 20 mm Min: 105 x 100 mm Book thickness : 3 -- 70 mm Mechanical speed, Max: 15,000 cycles/hr

Condition: excellent (used), Year of construction: 2017, Ref:11008 . 2017 Morgana AutoCreaser Pro 33 User friendly, single operator, standalone machine to crease digitally printed, heavy weight or cross-grained stock. Features: Morgana AutoCreaser Pro 33: Uses a unique creasing rule and matrix system to prevent cracking & tearing. 7" 'SmartScreen' touch screen controls all main functions. Automatically calculates where the creases need to be and sets them accordingly. Alpha-numeric memory allows an unlimited number of jobs to be stored. ‘PosiFeed’ feed system allows product to be piled higher and able to feed difficult stocks. Specification: Feeding System: Bottom suction feed Max. Sheet: 700mm x 330mm (27.5” x 12.6”) Min. Sheet Size (in automatic mode): 210mm x 140mm (8.5” x 5.5”) Max. Paper Thickness: 0.4mm (varies according to hardness, fold type & substrate) Max. No. Creases per Sheet: 16 Min. Distance Between Creases: 0.1mm Max. No. Stored Programmes: Unlimited Min. Crease Distance from Leading Edge: 2.5mm Fodpfxew U Ddbe Anxjgf Min. Crease Distance from Tail Edge: 35mm In Hand Feed Mode up to 2499.9mm to Last Crease can be Programmed. Speed per Hour (A4 in half): 8500 Speed per Hour (A5 in half): 11000

Condition: good (used), Year of construction: 2010, Ref: 10940 . 2010 CMC Q-Cover One Semi Auto casemaker that turns-in one side at a time and folds the corners automatically. The cover is then passed into the nip-roller, output on collector table. Equipped with: Huge variety of materials for high-quality cases and covers Lining operations on the same unit Stainless hot & cold gluing unit Automatic viscosity circuit and fast flushing system Case gauge for spine and pages Innovative corner tucking devices Vacuum-suction feeding belts for faster operation Easy-operation touchscreen Adjustable case-collection hopper Accessories: Large size kit for box production etc Specification: Min size: 15mm x 15mm Max. size turned edge: 46 x 78mm Max. size edge-to-edge: 50 x 80mm Minimum Height of Case 105 mm Maximum Open Flat Case 760 x 460 mm Paper thickness 100g/m2 – 170g/m2 Board thickness: 1.5mm - 3mm Fgjdpev Uqpmsfx Anxjf

Condition: new, Year of construction: 2026, Ref:10804 . NEW 2026 Universal Z Card Line. Fully automatic line for making Z card fold-out maps, timetables and other promotional card leaflets etc. State of the art modular design and attachments that can be added as users requirements change. This unique line is capable of performing many different types of production with just one machine. Briefly Comprising:- LoCo friction feeder – bottom (option to go to 300 mm wide) Fodpfx Anot Dpwdjxogf LoCo friction feeder – inner text LoCo friction feeder – top Choice of PVA Cold glue or EVA Hot-melt gluing system – 4 heads with electronic control Counter/kicker Shingle delivery table Including accessories & spare parts. (In-house compressed air supply required). Specification: Stock weight : 90 – 400 gsm2 Production speed : max.150/min. depending on stock. Power requirement : Single phase, 220V, 3kW

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Fgsdju Snwmopfx Anxof Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: used, Year of construction: 2022, Ref: 11103 . 2022 Horizon HT-110 Three Knife Trimmer Excellent condition! Only 500,000 books cut! Fodpfx Ansy T H Uhoxogf Inline or offline trimmer capable of rates of up to 4,000 books/hour. Features: The trimmer is simple and easy to operate, with all necessary setup performed through the icon-based touchscreen. Can run at speeds up to 1,600 cycles per hour. Can also reach production speeds up to 4,000 books per hour by stacking up to 3 books at once. Can be run inline as part of the CABS Perfect Binding System, but it can also be run offline as a standalone trimmer. Specification: Untrimmed Book Size (Spine × Fore-edge) * 148 × 105 mm to 410 × 320 mm Finished Book Size (Spine × Fore-edge) * 145 × 103 mm to 366 × 300 mm Trim Width * Fore-edge: 45 mm * Top-Bottom: 30 mm Trim Height (book thickness/spine thickness) * 2 mm to 100 mm Production Speed 400 to 1,600 cycles/hour

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Fjdpfovtcviox Anxegf Compressed air required : 100 ltr/min.@ 6 bar

Condition: excellent (used), Year of construction: 2022, Ref: 11080 . 2022 Horizon CABS 4000-VF EVA Line Excellent Condition! Only 985,000 books produced! 'Computer Aided Binding System' designed for bind-on-demand production. ‘V’ = Variable, book on demand capability ‘F’ = Flap cover feeding capability Comprising: (2020) Tecnograf ‘MettaLibro’ Book block feeder SB-09VF Variable binder with hand feed station and 9 clamps LCD screen operator console for various functions/set-ups ‘PX-Core’ Central control computer system SI-15 book block sensor unit for auto system set-ups & quick book size/thickness make-ready S-09S Automatic feed unit Auto cover score & register settings from data input Milling & roughing station with DB-15 milling blower unit PM-20II EVA hot-melt pre-melt unit MU-09 EVA hot-melt spine glue unit with side glue discs Pile rotary grip cover feeder with double sheet detection Fsdey Awcbepfx Anxjgf LD-09 lay-down delivery belt PP-101 pre-stacking unit with approx. 9m conveyor to; HT-110 Automatic three knife trimmer HC-110 manual feed conveyor to use trimmer as standalone LCD screen operator console for various functions/set-ups Quick book size/thickness make-ready unit Dust bag extraction unit Roller delivery unit Including tools, accessories & manuals. Specification: Binder - book size: Max: 400 x 330mm (manual) Portrait Max: 330 x 250mm (auto) Min: 148 x 105mm Max: 330 x 320mm Landscape Min: 135 x 185mm Book thickness: 1 - 45mm Open cover size: Max: 400 x 660mm Min: 135 x 220mm Trimmer, book sizes: Max: 330 x 330mm untrimmed Max: 300 x 300mm trimmed Mechanical speed: Max: 4,000 cycles/hr. auto

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. Fjdpfxjy Hixvj Anxjgf • SAK-66 shingle belt delivery table. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm.

Condition: excellent (used), Year of construction: 2014, Ref:11081 . 2014 Kolbus DA-270 Casemaker For high-speed production of hard book covers, Lever Arch files and games boards. Comprising: ‘Co-pilot’ system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board magazine feeders Central soft spine feeder with double reel holder for auto-splice and cutter for waste *Special board centre strip cutting device Magazine feeder of pre-cut cloth with miss control Mobile hot-melt gluing unit with pre-melter* Fedpeyzy Rrsfx Anxogf Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals. N.B. Compressed air and water supplies to client’s account. Accessories: Board centre-strip cutting device for cutting rigid centre board strips to width, with possible width variance from product to product for digital book production. ° Board sheet thickness max. 2 mm ° Width max. 1,500 mm | height min. 140 mm | max. 390 mm ° Board centre-strip max. 7 mm | max. 60 mm Kolbus ECK standalone corner cutter to work with case maker Specification: Size of opened case, Max: 670 x 390 mm Min : 205 x 140 mm Centre strip width : 6 - 90 mm, thickness 1 – 4 mm Joint width : 4 - 15 mm Turn-in width, closed : 8 – 15 mm Output, variable : up to 65 cycles/min Floor space : L: 6700 x W: 3000 x H: 2,200 mm Electrical loading : 15 kW (3ph, 400V, 50 Hz) Air requirement : 33 Nm3/h 6 bar.

Condition: good (used), Year of construction: 2009, Ref: 11073 . 2009 AL-MEISTER PLS3310 Pluster Laminator 350mmx500mm single sided laminator for a wide variety of stock. Features: Very user friendly Fgsdpfeymz N Sex Anxjf Cost saving, optimized efficiency Paper feeding, laminating and separating all in one go. Pluster ‘s unique feature is that the film setting information is stored for future reproduction. Fujipla's accumulated laminating technology provides excellent quality. Offset & digital printing on demand can be perfectly laminated with Fujipla's special SAP film. The most compact machine on the market with the lowest noise level. Can be used anywhere, from factories to office spaces or small areas. Specification: Processing Speed: 1.0-5.0m/min. (*1) Warm-up Time: Approx. 15-30min. (*2) Temperature Range: Ambience, 60-130°C Feeder Max. Load: 100mm Paper Thickness: 115-300g/m2 Max. Paper Size: 350mm(W) × 500mm(L) Min. Paper Size: 318mm(W) X 450mm(L) Power Consumption: 1.0kw / 6A Power Source: AC220-240V Net Weight: 151.6kg

Condition: good (used), Year of construction: 2016, Ref:11076 . 2016 Muller Martini SIGMA Three Knife Trimmer On demand trimmer for digital dooks finishing Features: Designed for the finishing of both offset- and digitally-produced books in a one-off, short-, or large-run workflow. Fully-automated, one-off book 3-knife trimmer. Ultra-efficient digital book trimming system with zero makeready for optimal one-off book production. Workflow can be consolidated and efficiently processed through the SigmaTrimmer work center with minimal production planning effort & considerable labour savings. Bound, untrimmed books of varying sizes and thickness can be fed into the SigmaTrimmer continuously, without stopping to change parts or key in any data. Book printers can cut books of different formats and thicknesses in quick succession, without interruption. The format for each book is read with a barcode scanner during infeed and all settings are made automatically, which eliminates makeready time. Specification: Max speed: 1,000 cycles/hr Max untrimmed size: 320x240mm Min untrimmed size: 154x108mm Max book thickness: 40mm Min book thickness: 2mm Max Front trim: 86mm Min front trim: 3mm Max foot trim: 75mm Min foot trim: 3mm Fgsdsyw Hwdepfx Anxef 5 x Sigma trimmers available, all the same age. Can be bought individually or as multiples.

Condition: excellent (used), Year of construction: 2019, Ref:11075 . 2022 Horizon Stitchliner Mark III Only 8.35 million books made! Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 12 station (1 x VAC 600Ha + 1 x VAC 600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 4 x Hohner 43/6S stitching heads to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer PK-30 Kicker Shingle delivery belt Fgedeywlifjpfx Anxjf

Condition: excellent (used), Year of construction: 1985, Ref:11083 . 1985 COMO 220 MC2 Guillotine. Swedish built heavy-duty guillotine for accurate cutting of paper and heavier substrates. Refurbished 2010 and upgraded to computer programme. Comprising; Right side table to facilitate rear loading of cutting bed Central air table Fgodpey Awy Hefx Anxef Steel side tables Computer programme cut control, with keypad input of data Twin cut control buttons Variable pressure clamp control Swift knife change system and adjustment Powered variable speed back gauge I.R. light beam guarding to UK HSE spec. 2 x HSS knives Including knife change tools and accessories. Specification: Cut width, Max: 220 cm Cut depth, Max: 220 cm Clamp opening :18.5 cm Electrics: 415V, 30A, 50Hz

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible Fgsdpfoy Avl Isx Anxsf *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm

Condition: excellent (used), Year of construction: 2016, Ref: 11070 . 2016 ‘Heidelberg’ Stahl TH82/644-PFH Folding Machine High performance all buckle folding machine with auto setting (no sound hoods). Comprising: • PFH82 pallet loading pile feeder designed for medium to high run lengths with Fsdpfx Aoyk H H Ronxsgf low operator strain, laser guided positioning of the stack, double wheel suction head for wide format sheets. Max. pile height 1.2 metres. • Digital microprocessor control with self-learning function for signature length & spacing with run monitoring, total and batch counter with memory. • Touchscreen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • VSA 56 vertical stacking delivery. Including compressor, tools, spares & manuals. Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 52cm with 4 plates, perforating/scoring shafts Gate fold attachment Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm Fold length, Min: 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h.

Condition: used, Year of construction: 2021, Used Palamides gamma 502ho delivery machine The Palamides gamma 502ho is an automatic delivery and banding machine, specifically designed for the efficient post-processing of print products such as brochures, flyers, greeting cards, and mailings. It is ideal for connection to folding machines, saddle stitchers, collators, or mailing lines and stands out due to its compact design, high flexibility, and ease of use. The gamma 502ho increases productivity, reduces operating costs, and enables efficient handling of large production volumes even with minimal staff. Fodpfxszrlp Ej Anxsgf Key Features - Compact, mobile design: Requires only a small footprint and can be quickly connected to various production machines. - Automatic banding: Optional, robust impulse sealing system for secure and clean banding of stacks. - Intuitive operation: Clear touch display and user-friendly interface for quick setup and operation by a single person. - Flexible delivery: Stacks can be banded or delivered loose; the desired quantity is freely selectable. - Efficient waste control: Automatic ejection of defective products, production stop if too many defective copies occur in succession. - Large buffer table: Gives the operator sufficient time for quality control and packaging of stacks. - Seamless integration: Especially suitable for connection to the Horizon iCE StitchLiner Mark IV, but also universally usable for other machines—no additional interface required. - Industry 4.0-capable: Operational data acquisition and dynamic separation of book blocks of different sizes possible (DSP platform). Technical Specifications - Infeed format: 4-page sheets, variable from 650 to 1,000 mm - Product thickness (max.): 100 mm (optional 120 mm) - Format (max.): 510 x 235 mm - Format (min.): 140 x 95 mm (optional 95 x 75 mm) - Performance: up to 600 packs/cycles per hour - Main connection: 3ph+N+GND 400V AC, 50/60 Hz - Control voltage: 24V DC - Power: 4 kW - Fuse: 16A - Year of manufacture: 2023 - Weight: approx. 500 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 1976, Printing press, Gierlich, model P6000. Fgsdpfxozruxpe Anxef Year of manufacture: 1976.

Condition: used, Druckplatten Biegeeinrichtung für Heidelberg SM52 Format - Plate Bending device Heidelberg SM52 Size Druckplatten Biegeeinrichtung - Plate Bending device NELA GS-Biegegerät Baujahr / Year 1997 - Serial-No. 1144/41 Druckplatten Biegeeinrichtung für Heidelberg SM52 Format Plate Bending device Heidelberg SM52 Size Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Fgsdpfxszr N Tus Anxjf

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. Fjdpfx Aov Nv Tajnxsgf We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing area 350 x 510 mm Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Primary fuse rating at least 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: used, Die elektrische Zwillingspressen eignen sich zum Pressen von Büchern, Broschüren, Plakaten, Bildern etc. The electric twin presses are suitable for pressing books, brochures, posters, pictures, etc. Elektrische Zwillingspresse / Eletric Twin Press Wolk SP Serial-No. 909 Pressdruck / Pressure max. 2500kgs Pressfläche ja Pressplatte / Press Area each Plate 340 x 430mm Pressdruck regelbar / Adjustable pressing pressure Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Fedpfezr Iqlex Anxogf

Condition: used, Year of construction: 2011, Perfect binder Wohlenberg Quickbinder Year: 2011 The Quickbinder from Wohlenberg is intended not only for expanding smaller-sized companies making the jump to quality book binding applications, but also for large, industrial-scale book binding companies who can utilize the machine for the production of superior, high-quality samples and editions. Description: - Motorised setting - Colour monitor with touch screen: Navigator - Solo perfect binder - Hand feeding - Number of clamps: 5 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - Hotmelt side glue unit Fjdpfozl Edpsx Anxegf - Rotary cover feeder - Nipping and pressing station - Belt delivery Optional available: Wohlenberg lay down delivery for connection to a conveyor system / three knife trimmer Description modified on Max. mechanical speed: up to 2.000 cycles/h Maximum size range (wxhxt): 430 x 320 x 70 mm Minimum size range (wxhxt): 110 x 105 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Canon imagePRESS C270” color production system Items for Sale: 1 x Canon imagePRESS C270 with the following features: Includes Fiery E500-06 Includes Staple Finisher-AC1 Includes Duplex ADF / R-ADF Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Counter readings: Total: Approx. 33,077 pages Color: Approx. 18,517 pages Black: Approx. 14,558 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: Fedpfozm Ul Sox Anxsgf You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of the device undergoing a functionality test for you. For more information, please feel free to contact us directly.

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools Fedpfxjzqhgds Anxsgf * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.