Used presses / textile presses for sale (14)

Condition: excellent (used), functionality: fully functional, pressing force: 160 t, table width: 1,600 mm, table height: 2,000 mm, Equipment: documentation/manual, KAEV Hydraulic Cutting System Available Complete KAEV hydraulic cutting system, originally used for die cutting acoustic composites and laminated automotive parts. 1. Hydraulic beam cutting press Four-column press with double-balanced yoke, self-lubricating bushings, column covers and two hydraulic cylinders integrated into the frame. The two-stage hydraulic pump provides fast approach and a slower, high-power cutting stroke. Hydraulic unit capacity: up to 300 litres; oil included. Crjdpfx Aqjz E S Ilovei Features include automatic die-finding to set the lowest cutting point and infinitely adjustable return stroke. The control cabinet has a touch-screen panel and OMRON PLC, with scope for extensions and additional equipment. Standard software includes error indication, modem for internet connection, setup/manual/automatic modes and German/English interface. Protective covers and safety photocells are fitted. Technical data: • Cutting force: 160 t / 1,600 kN • Table/beam: 2,000 × 1,600 mm • Table height: approx. 950 mm • Daylight: 200 mm • Adjustable stroke: 15–180 mm • Stroke speed: 51 mm/s • Pump motor: 22 kW or 18 kW • Max. cutting oil pressure: 314 bar • Weight: approx. 16,000 kg 2. Pneumatic clamping beam feeder Rear-mounted feeder with one travelling beam pair for feeding material under the press and one pair for pulling and holding material. Feeding is driven by toothed belts and a frequency-controlled geared motor. The servo-driven pulling beams hold material securely and can reposition it backwards to a programmed position. PLC-controlled electro-pneumatic cabinet. Feed length is set at the touch-screen panel. Material is supported by a belt; the feeding area by a steel plate. Technical data: • Clamping width: 2,000 mm • Max. feed length: 1,600 mm • Beam opening: 60 mm • Beam speed: up to 800 mm/s, adjustable • Feed accuracy: ±1 mm • Pull-off force: 200 kp 3. Cutting pad shuttle unit The cutting pad moves in sync with material feeding to the front of the press, allowing convenient removal of cut parts. A linear drive and frequency-controlled geared motor move the shuttle frame. An automatic pad-shifting system connected to the cutting block changes the cutting position within a defined area, reducing repeated cuts in the same spot and extending pad life. A horizontal safety light curtain (approx. 1,200 mm) stops movement if the operator enters the shuttle area.

Condition: like new (used), JEUX AI-101 – Column-type band sealing machine – Hot air sealing machine Column-type seam sealing machine with differential speed control, memory function, electronic 3D nozzle positioning system and temperature control for the band heater. Csdpfxsz S T U Us Aqveri -220 volts

Condition: used, Year of construction: 1997, machine/vehicle number: 971004, functionality: fully functional, input voltage: 230 V, input current: 24 A, input frequency: 50 Hz, type of input current: DC, year of last overhaul: 2026, Equipment: CE marking, 5 C – Schaeffer SH2000-160 Industrial Snap Fastening Machine – Dual Head Semi-Automatic Unit Description: For sale is a Schaeffer industrial snap fastening machine, model SH2000-160, designed for efficient attachment of metal snaps and similar fasteners in garment production. This industrial unit features a dual-head fastening system and semi-automatic operation modes, allowing improved productivity and consistent results compared to manual setups. The machine is equipped with a belt-driven mechanical press system and integrated control panel with selectable operating modes. The machine has been used in a professional garment factory environment and is being sold due to factory closure. Its construction enables stable and repeatable fastening operations, making it suitable for continuous production processes where consistency and efficiency are required. Includes: • Schaeffer SH2000-160 fastening machine • Dual-head fastening system • Integrated motor (Georgii Kobold) • Electrical control panel with operating modes • Hopper feeding capability • Heavy-duty pedestal base • Foot pedal control Technical details: • Manufacturer: Schaeffer GmbH (Germany) • Model: SH2000-160 Codpfx Aoy Aiafsqvsri • Dual-head configuration • Belt-driven mechanical press system • Operating modes: manual / automatic / hopper • Power supply: 3-phase (according to machine plate) Condition: Used industrial condition. Operational prior to factory shutdown. Sold as-is, where-is, without warranty. Inspection possible prior to dismantling. Typical applications: • Snap button / press stud attachment • Denim and workwear production • Outerwear manufacturing • Industrial garment production Sales terms: This equipment is sold due to factory closure and is being liquidated directly from production use. Sold as-is, where-is, without warranty. Buyer is responsible for: – ensuring suitability for own materials and production No claims accepted after sale. Removal & transport: Buyer responsible for dismantling and transport. Serviced 27.2.2026. Video in working situation taken 5.3.2026.

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 678, functionality: fully functional, power: 1,400 kW (1,903.47 HP), input voltage: 380 V, input frequency: 5,060 Hz, type of input current: three-phase, table width: 400 mm, table length: 500 mm, total length: 1,700 mm, total width: 2,100 mm, total height: 1,500 mm, overall weight: 1,300 kg, Equipment: CE marking, safety light barrier, Transmatic CA 1000 – 6 Stations (late 2019 model) This is an automatic rotating carousel heat press in excellent condition – almost like new – with very few operating hours. The machine is fully operational and is still installed in our production line, maintained to professional factory standards. It offers high efficiency and productivity, capable of producing approximately 7,500 pieces per day with only 2 operators, making it ideal for companies focused on transfer printing and high-volume textile applications. Key Features: - Automatic 6-station rotating carousel system - Very low usage (limited production hours) - Plate dimensions (50cm x 40cm) - High production capacity (~7,500 pieces/day with 2 operators) Cjdpfx Aqozi Sm Ssveri - Precise control of temperature, pressure, and timing - Reliable and consistent output - No additional investment required – ready for immediate use.

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 193 kg, SEFA Duplex Pro V3 – Pneumatic Double Platen Heat Press – 2022 Pneumatic double platen / double workstation heat press SEFA Duplex Pro V3, manufactured in 2022, in excellent condition. Machine tested and cleaned, ready for immediate use. Cedpfx Aqeyvh Rcjvori - Delivery no included Ideal for any professional textile marking workshop requiring high throughput and reliable performance. TECHNICAL SPECIFICATIONS - Brand: SEFA - Model: Duplex Pro V3 - Year: 2022 - Type: Pneumatic double platen heat press with lateral swing - Platen size: 40 × 50 cm (16 × 20 in) - Maximum pressure: 625 g/cm² - Maximum temperature: 220 °C - Power: 2,200 W - Power supply: 240 V single-phase - Maximum substrate thickness: 45 mm - Weight: 170 kg - Dimensions: 713 × 891 × 1,079 mm - 3 pressing modes: single platen / semi-automatic / full automatic - Independent pressing time per platen - 10 storable time/temperature programmes - Foot pedal control included as standard - Automatic head translation - ECO mode, standby mode, dual piece counter - Designed and manufactured in France APPLICATIONS Textile sublimation and rigid substrates, heat-seal flex and flock, screen-print transfer, laser transfer, DTF on garments and accessories, DTG pre-treatment drying. CONDITION Tested, cleaned, excellent overall condition. Available immediately. Sold by Manutech-Print, professional reseller of textile printing equipment. Contact: manutech-print.com

Condition: used, Year of construction: 2024, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Lotus Press LTS 138’ textile press Item for sale: 1x Lotus Press LTS 138 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Cjdpfxjzy U Uyo Aqvjri The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: as good as new (ex-display), Year of construction: 2017, › ideal for all shirt fabrics (FX 1000) 1000mm belt › seperate feeding and transport belts, "cool feeding" › special insulation, little heat radiation › upper and lower heating individually controlled, with temperature limiters (1000 mm - 39 .37 inch long) › seperate heating zones selectable, TOP (shirt), BOTTOM (outerwear) Credpfxspfa Nhe Aqvji › special speed-heat up function, for fast heating of the machine › touch screen for program storage and service functions › optional air and compression cooling › failure diagnostic system

Condition: ready for operation (used), Year of construction: 2007, HPM 12-33-2 two-roll machine, 3300mm wide, 1200mm diameter, steam-heated. Width approximately 460cm and length 8 meters. Cjdpfx Aqjz Spu Devori

Condition: used, Year of construction: 2019, machine/vehicle number: 138716, functionality: fully functional, power: 2.3 kW (3.13 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 900 mm, total width: 930 mm, total height: 1,850 mm, overall weight: 260 kg, Equipment: CE marking, MACPI 321.715 Industrial Garment Pressing / Finishing Machine (2019) Professional Steam-Pneumatic Finishing Machine for Jeans, Trousers & Workwear The MACPI 321.715 is a professional industrial trouser finishing machine manufactured by MACPI S.p.A., Italy in 2019. Designed for high-volume garment manufacturing, the machine combines steam, compressed air, and pneumatic tensioning to produce consistent, high-quality finishing results for jeans, trousers, chinos, and workwear garments. The unit has been used in professional garment production and remained fully operational until factory shutdown. The machine was tested and video recorded in operation on 05.03.2026. Technical Specifications • Manufacturer: MACPI S.p.A. • Model: 321.715 • Machine Type: Industrial Trouser Finisher • Year: 2019 • Serial Number: 138716 • Country of Manufacture: Italy • Weight: Approximately 260 kg • Power Supply: 400 V, 3-Phase, 50 Hz • Heating System: External Steam Supply • Pneumatic System: External Compressed Air Required • Drive System: Panasonic VF200 Inverter • Control System: Electronic Digital Control Interface Key Features • Professional steam-pneumatic finishing system • Designed for jeans, trousers, chinos, and workwear • Pneumatic garment tensioning system • Adjustable steam and air cycle parameters • Multi-zone finishing process • Digital electronic controls • Panasonic inverter drive • Foot pedal operation • Heavy-duty industrial steel construction • Designed for continuous production environments Includes • MACPI 321.715 finishing machine • Electronic control panel • Panasonic VF200 inverter • Pneumatic clamping system • Steam connection interfaces • Industrial frame • Foot pedal controls • Integrated safety guards Applications • Jeans finishing • Trouser finishing • Chino production • Workwear finishing • Uniform production • Garment manufacturing • Textile finishing departments • Industrial apparel production Condition • Fully functional • Previously used in professional garment production • Tested and video recorded in operation on 05.03.2026 • Serviced on 27.02.2026 Crjdpfx Aqszidfgevji • Good industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, compressed air, and electrical connections, dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's industrial utility connections. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: excellent (used), The devices shown in the pictures are robust, hand-operated lever presses from the ASTOR brand, model 52M. This type of press is used for riveting, crimping, attaching eyelets, snaps, and fasteners, as well as other assembly operations in leather goods, saddlery, footwear, and textile products. Description: Crsdpfxjz Sm Rwo Aqvji Manufacturer: ASTOR Model: 52M Quantity: 2 units Hand-operated lever drive Heavy-duty cast iron construction Option to mount various working tools Stable base for screwing onto a table Simple and reliable design Ideal for saddlery, footwear, and upholstery workshops.

Condition: used, Year of construction: 2019, machine/vehicle number: 269913, functionality: fully functional, power: 0.5 kW (0.68 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, total length: 1,140 mm, total width: 1,380 mm, total height: 1,440 mm, overall weight: 230 kg, Equipment: CE marking, PONY BP-B Professional Garment Press (2019) Industrial Steam-Pneumatic Press for Trousers, Waistbands & Structured Garments The PONY BP-B is a professional industrial garment pressing machine manufactured by PONY S.p.A., Italy in 2019. Designed for continuous production environments, this steam-pneumatic press delivers high-quality finishing for trousers, waistbands, jackets, coats, and other structured garments. The machine combines steam, compressed air, and an integrated vacuum system to produce consistent, wrinkle-free finishing results with high productivity. The machine has been used in professional garment manufacturing and remained fully operational until the factory shutdown. Technical Specifications • Manufacturer: PONY S.p.A. • Model: BP-B • Year: 2019 • Serial Number: 269913 • Country of Manufacture: Italy • Power Supply: 230 V, Single Phase, 50 Hz • Power Consumption: 0.5 kW • Working Steam Pressure: Up to 5 bar • Pneumatic Operation: External compressed air required • Vacuum System: Integrated Lowara vacuum unit • Weight: Approximately 230 kg Key Features • Professional steam-pneumatic garment press • Integrated vacuum extraction system • Steam-heated pressing head and buck • Designed for trouser tops, waistbands, jackets, and structured garments • Adjustable pneumatic pressing pressure • Foot pedal operation • Dual safety hand controls • Emergency stop button • Heavy-duty industrial construction • Suitable for continuous production environments • Includes • PONY BP-B garment press Cedpfxozkhy Rs Aqvori • Integrated Lowara vacuum system • Steam and pneumatic connections • Foot pedal controls • Industrial cabinet base • Safety guards • Electronic controls Applications • Trouser finishing • Waistband pressing • Jacket finishing • Coat finishing • Workwear production • Garment manufacturing • Commercial laundries • Textile finishing departments Condition • Fully functional • Previously used in professional garment production • Serviced on 27.02.2026 • Video recorded in operation on 05.03.2026 • Good industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, compressed air, and electrical connections, dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's industrial utility connections. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Rotex Air Lite V3 IVM” textile press Item for sale: 1x Rotex Air Lite V3 IVM Condition: Cedpfx Aqszpw E Hjveri This offer is for a used device, which may show signs of wear (minor scratches or discoloration). The unit has been tested to ensure it is in working order. Packaging and Shipping: You are welcome to inspect the unit during our business hours. Please schedule an appointment to do so! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we will record a video of a functional test for you. For more information, please feel free to contact us directly.

Condition: used, Year of construction: 2019, machine/vehicle number: div., functionality: fully functional, 2x ROLLEX ironing presses, for pre-ironing (PRE-IRON); working width: 2.25 m, Washing machine / dryer set Washing machine Milnor; load capacity: 65 kg; year: 2004 Cedowpi Rkepfx Aqveri + Dryer Kannegiesser; load capacity: 50 kg; year: 2005 + Dryer Passat; load capacity: 50 kg; year: 1984

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally. Cedjx Eg Upspfx Aqvjri