Press brake

Edwards Pearson PR6 60 / 2550

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Cedpfx Agerthkujzspw Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. Cpedpfxotia Hhe Agzjw

Condition: used, Year of construction: 2009, functionality: fully functional, A Scholz glass autoclave with dimensions of 9000 mm length x 3000 mm diameter is an industrial hot-air autoclave designed for the production of high-quality laminated safety glass and is typically a used unit from a specific year of manufacture. General Description and Features: This large-capacity industrial autoclave is primarily utilized in the architectural glass sector for the lamination process, in which layers of glass are bonded with interlayer polymer film materials (such as PVB or SentryGlas) under precisely controlled high temperature and pressure conditions. Key features and general specifications: - Dimensions: The inner chamber measures approximately 9000 mm in length (9 meters) and 3000 mm in diameter (3 meters). - Heating System: Equipped with an electric heating system that ensures consistent temperature distribution throughout the process. - Control System: Features a control panel, typically a touchscreen operator interface, along with digital temperature and pressure controllers (Honeywell), allowing accurate process monitoring and control. - Door Mechanism: Incorporates a rapid-opening closure system designed for industrial efficiency and workplace safety. - Construction: Fabricated from premium-grade materials, most likely carbon steel for the pressure vessel, with internal components engineered to withstand the demands of glass lamination operations. - Applications: Designed primarily for laminated glass, Scholz autoclaves can also be configured for other thermal processing tasks and composite material production—such as fiber-reinforced plastics—depending on customer requirements. Technical Data: Codpfowintkjx Agzspw Exact operating parameters (pressure and temperature ranges) for units of these dimensions may vary, as Maschinenbau Scholz manufactures each autoclave to suit individual client demands. - Operating Pressure: While typical Scholz industrial autoclaves are rated up to 210 bar, applications in glass lamination generally require pressures between 0.1 MPa and 1.6 MPa (approximately 1 to 16 bar). - Operating Temperature: The glass lamination process typically operates from ambient temperature up to about 150°C, although Scholz autoclaves are capable of handling temperatures up to 650°C for various processes. - Electrical Specifications (example for a used model): - Rated current: 1100A - Service voltage: 400V - Control voltage: 24V, 230V / 50Hz These specifications and details refer to Scholz hot-air autoclaves for glass production, covering dimensions, heating systems, and control technology.

Condition: used, Year of construction: 2015, Numerical Control NC 1000 Software Biesse Works Working field in X axis 4300 mm Working field in Y axis 2205 mm FT nesting full plane worktable Automatic loading system with side lifting table Automatic labeling machine for barcode printing Automatic printing and application system of adhesive labels N ° 1 vertical electrospindle, with automatic tool change, HSK F63 Blade unit integrated in the drilling head on X axis - diam. 120 mm Blade unit integrated in the drilling head on Y axis - diam. 120 mm Automatic tool change system with 8 positions - positioned on the machine operating head Automatic tool change system with 21 positions - positioned on the rear of the machine with chain BH 20 boring head with independent spindles arranged as follows: - N ° 8 vertical in X axis - N ° 8 vertical in Y axis - N ° 4 horizontal in X axis - N ° 4 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps Csdpswt Snyefx Agzopw

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Cpodpfxsh Nypfs Agzjw

Condition: good (used), functionality: fully functional, Year of construction: 2002, Ajial 3100x125tn CNC Cybelec Press Brake 2023 Cpjdpfxjwnxwqs Agzjw Brand: Ajial Model: 30125 Year: 2002 Bending distance: 3,100mm Force: 125tn Piston stroke: 200mm Motor: 12.5HP Three-phase 380V Axes: Y1, Y2, X Lower die pistons for compensation. New Cybelec CybTouch 8 control, installed in 2023

Condition: like new (used), Year of construction: 2017, operating hours: 16,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Cedpev S E Dgjfx Agzjpw Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Technische Ausstattung anfordern.

Year of construction: 2001, condition: good (used), Quality used Edwards Pearson pr6 cnc pressbrake for sale Video at the bottom of the listing Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Year 2001 Hydraulic R upper clamping T5 Table 4 axis back gauge – z1, z2, x and r axis – 6axis in total Cybelec DNC1200 Machine in good working condition including a full length set of upper & lower Pressbrake tooling. Serviced by Bystronic uk Cpsdpfxjh An Uao Agzjw Edwards Beyeler tooling P5R – R1 – 1030 full length top and bottom The machine is currently working in production and will be brought into our works to be checked, tested and carry out a cosmetic overhaul. We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec Cedpfx Agsxab Erjzepw dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Condition: used, Year of construction: 2006, Numerical Control XP 600 Working range on X-axis mm 3060 Working range on Y axis mm 1140 Working range in Z axis mm 160 N ° 2 work fields Bar worktop No. 6 adjustable bars for suction cup support No. of pneumatic bakelite bars for panel lifting (?) No. 2 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis 12 kW motor 10-position tool change system - positioned on the drilling head of the machine, ISO 30 type cones BH19L drilling head with 18 spindles arranged as follows: - No. 7 verticals on X axis - N° 6 verticals in Y axis - N° 4 horizontal on X axis - No. 2 horizontals on Y axis - No. 1 independent blade group for making grooves on the X axis Front protection and safety system with photocells Automatic lubrication system (?) Air conditioning system for cooling and cleaning of machine control Vacuum pump mc/h 250 TECHNICAL DETAILS TO BE CHECKED Cpjdpfxjv Aacfe Agzow