Used press brakes with 50-74t bending force for sale (72)

Condition: excellent (used), Year of construction: 2005, pressing force: 50 t, Hydraulic press brake Fab. AMADA Typ. HFP 50-20 Year 2005 Technical data Make: AMADA Type: HFP 50-20 Year of construction: 2005 Effective length: 2090 mm Capacity: 50 t Passage upright: 1,665 mm Stroke: 200 mm Projection: 400 mm Ihsdpfx Agjtzcxpo Ust Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: approx. 4.8 t Equipment - Controlled axles: Y1, Y2, X, R, Z1, Z2 - FIESSLER light barrier at the front - Amada upper tool clamping - CNC control 3D AMNC graphics - Rear safety guard (hinged mesh doors) - Swivel operation - front left - Tools: o Upper tool straight, R 0.8mm, H 117mm, length 2,000 mm o Bottom tool V10/88°, length 2,000 mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 2024, condition: new, SPECIAL ACTION: Folding press AD-S 1260 length/width/height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons bending length: 1250 mm Passage between stands: 1050 mm Stroke:160mm Installation height: 530 mm Throat: 450 mm table height: 900 mm table width: 104 mm Y High speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. lower tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motorized crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guidance along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Ihjdsd R Dhpjpfx Ag Ust Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, Fasti CNC pressbrake Model 904 - 50/20 Year : 1995 Capacity : 2050 mm. x 50 tons CNC control : Delem DA 23 e - 6 axis 2 hand control and footpedal Front arms Angle punch : 2000 mm. in segment Gooseneck punch : 2000 mm. in segment Gooseneck punch : 1000 mm. V die : 10 - 15 - 22 mm. in 2000 mm. V die : 30 - 40 mm. in 1000 mm. Iodpfx Agsxdahgo Ujht

Condition: used, pressure 70 t chamfer lenght 2600 mm Iodpfx Astqqqijg Ujht distance between columns 2750 mm stroke 60 mm total power requirement kW weight of the machine ca. 4,3 t dimensions of machine L x W x H 4,45 x 1,30 x 2,53 m Accessories: upper and lower die (each in segments) on 2500 mm length, 2 upper die segments each 835 mm long, back stop

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, actuation type: hydraulic, bending force (max.): 56 t, working width: 2,200 mm, throat depth: 200 mm, distance between stands: 2,100 mm, TECHNICAL DETAILS Press force: 56 t Bending length: 2,200 mm Distance between uprights: 2,100 mm Throat depth: 200 mm Iedpfjw Sxcysx Ag Uoht MACHINE DETAILS Total power requirement: 20 kW Dimensions & Weight Space requirement: 2,800 x 1,800 x 2,400 m Machine weight: 6,100 kg

Year of construction: 2005, operating hours: 54,000 h, condition: used, pressure 50 t chamfer lenght 1250 mm distance between columns 1020 mm Stroke beam 215 mm 470 mm 300 mm Quick speed,inspeed 150 mm/sec bendingspeed 0-10 mm/sec Ihsdpsppdpcsfx Ag Ujt opening speed 150 mm/sec X-axes 600 mm 200 mm Z1+Z2 axes controlled by cnc manuell,4 Anschlagfinger mm Number of working hours 54000 h Dimensions of machine: length 1600 mm width 1500 mm height 2300 mm weight 4900 kg Control Task total power requirement 9 kW dimensions of the machine ca. 2x2x2,5 m

Condition: excellent (used), Year of construction: 1994, Hydraulic press brake Fab. TRUMPF Typ. TrumaBend V50 Year 1994 Technical data: Trumpf Make: Trumpf Type: TrumaBend V50 Year of construction: 1994 Capacity: 50 t Effective length: 1270 mm Stroke: 215 mm Operating pressure: 290 bar Voltage: 3 x 400V Rated current: 12.5 A Connected load: 8.0 kVA Compressed air connection: 6 bar Dimensions: approx. L 2.00 x W 2.00 x H 2.40 m Weight: 4750 kg Equipment: Control unit - Control system: Delem DA-28 - Pneumatic die displacement - Hydraulic tool clamping top and bottom - Controlled axes: Y1, Y2, X, R Iodpfsr D Sdgex Ag Usht - 3 manual stop fingers, pneumatically clampable - Tools: Punch set segmented, straight, 1050 mm, new Die V16, 30° 1000mm Die V08, 30° 1000mm Die V10, 30° 1000mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 2024, condition: new, Länge/Breite/Höhe: 3200mm/1550mm/2750mm Weight: 3550 kg Bending force: 60 tons Bending length: 2050 mm Passage between stands: 1700 mm stroke: 265mm Installation height: 530 mm Projection: 410 mm table height: 900 mm table width: 104 mm Y Fast speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. bottom tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motor-driven crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guide along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Isdpfx Agsfgz U So Ueht Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: refurbished (used), Year of construction: 1979, For 75T working length 2500mm Ijdoxwxg Iopfx Ag Uoht

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 3,300 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, working width: 1,200 mm, Technical Details: General Information Manufacturer: Durma Model: E 1240 Year: 2008 Application: Bending Machine Type: Hydraulic Press Brake Number of Axes: 4 Control Unit: CYBELEC DNC 880S Capacity & Movements Bending Length: 1200 mm Stroke: 160 mm Machine Dimensions Ijdpfx Ajxzi Nbog Usht Depth: 1500 mm Height: 2400 mm Weight: 2900 kg

Condition: good (used), functionality: fully functional, Year of construction: 1987, working width: 2,000 mm, stroke length: 105 mm, distance between stands: 1,600 mm, overall weight: 4,300 kg, total width: 2,000 mm, pressing force: 50 t, Promecam ITP2-050-20 Converted to Delem DA 65R control system in 2019 15" touch screen with graphics Bending length 2000 mm stand passage 1600 mm Bending pressure 50 T CNC back gauge X-R-Z1+Z2 axis Iedpfxeu Dm Iuj Ag Usht Connected load 7.5kw Stroke 105mm Intermediate pieces Int100 Front support tables Amada tool system incl. many tools

Condition: as good as new (ex-display), Year of construction: 2023, The environmentally friendly CNC servo press brakes from WEINBRENNER, model series WPS, represent a maximum improvement on the previous hydraulic standard machines. Up to 60 % energy savings and higher angular accuracy. The tool holder corresponds to the AMADA system, as do the tools. The stability of the press is optimized by the closed frame construction To compensate for deflection, the press is equipped with a motorized, CNC-controlled table crowning system (System WILA). Technical data: Maximum press capacity: 50 tons Bending length: 2040 mm Table width: 60 mm Table width with WILA lower tool: 90 mm Table height from floor: 930 mm Installation height: 590 mm Max. Press stroke: 300 mm Lowering speed: 150 mm/sec. Pressing speed: 10 mm/sec. Iedoth U Edspfx Ag Uoht Retraction speed: 150 mm/sec. Max. utilization range backgauge (X axis): 750 mm Max. utilization range backgauge (R axis): 160 mm Adjustment speed of the backgauge in the X-axis, servomotor: 330 mm/sec. Positioning accuracy of the backgauge: +/- 0.03 mm Motor power: 2x 5.5 kW Equipment / standard accessories: - CNC control " ESA S875-2D". This enables easy graphic programming of products. After one the control unit calculates the bending sequence and all axis positions (including collision warning), 15" TFT color display touch screen, USB interface, network connection, tool directory for 50 punches and dies each. Graphic 2D programming, 2D display while working, maximum 4 axes + auxiliary functions. - Arm adjustable in height and sideways in 2 axes for ergonomic and convenient operation of the CNC control. - Split upper tool, "Amada" system, manufacturer Italy, material C 50 (HRC 50-52) induction-hardened and ground on the working surfaces. ground on the working surfaces. Load capacity: 100 to per meter. Standard delivery: Pitch: 2 x 835 mm, horn left and right each 100 mm each, rest in smaller pitch. Height 66.6 mm - Bottom tool / 4-fold prism cube CroMo 4, ground 60x60 mm, V-openings standard: 16 - 22 - 35 - 50 mm - 2-axis backgauge "X - R", AC servomotors, travel: X=0 mm, R=160 mm, positioning accuracy + / - 0.03 mm, Travel speed: 330 mm / sec. Including 3 laterally adjustable stop fingers - Laser protection "FIESSLER" with 2-fold beam, type AKAS / LCII, operation of the press only possible with foot pedal. - Automatic motorized table crowning system WILA, integrated in the CNC - front sheet supports (2 pieces) can be moved laterally via linear guide, height adjustment with handwheel. Equipped with wide brush supports - German operating instructions with spare parts list - CE conformity

Condition: new, Hydraulic synchronized bending press MVD Mod. I-Bend B 2100 60 ESA S630 Colour Numerical Video Graphic Control Controlled axes No. 4 ( Y1-Y2-X-R-) Multi-beam barriers NEW ELECTRONIC DSP LASER Ihsdpefh Nz Rofx Ag Uot High speed motorized rear register UNIMEC (Made in Italy) GIVI MEASURES optical lines (Made in Italy) Bend length mm 2100 Power exerted Ton 60 Cable mm 410 Stroke mm 260 Opening mm 465 Upper tools and lower die ROLLERI supplied

Condition: used, Hydraulic Schiavi folding machine 2500X50, motorized register, 400 recess. Dimensions: 290x150x200(h) cm, Weight 3800 Kg Ihodpfx Agjwn D N Ej Ujt

Condition: new, Year of construction: 2025, control type: CNC control, bending force (max.): 63 t, working width: 2,000 mm, travel distance X-axis: 550 mm, back gauge adjustment: CNC-controlled, back gauge: 550 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Brand new 3-axis CNC-controlled press brake with automatic bending angle calculation and color graphics. Maximum pressing force: 630 kN = 4 mm steel sheet S235jr bent along the entire bending length with a V-width of 36 mm Maximum bending length: 2,000 mm Distance between side frames: 1,320 mm Throat depth in side frames: 250 mm Ihsdpfxoxdiyrs Ag Ust Ram stroke length: 100 mm Maximum installation height: 320 mm Ram travel speed downwards: 50/6 mm/sec, upwards: 60 mm/sec Table width: 160 mm Back gauge adjustment range: 550 mm Oil tank capacity: 250 liters Dimensions approximately 2.6 x 1.5 m x height 2.4 m Drive power: 5.5 kW Weight: approx. 3,500 kg Equipment: - Die block - Bending punch

Condition: used, 🔧 Technical Specifications Year of Manufacture: 1989 Pressing Force: 60 tons Maximum Bending Length: 3100 mm Stroke Length: 100 mm Distance Between Uprights: approx. 2600 mm Throat Depth: 200 mm Maximum Opening Between Table and Upper Tool: 280 mm Working Speeds: Approach: 80 mm/s Working Stroke: 11 mm/s Return: 70 mm/s Ihsdpfx Agoxtn H Ne Uot Backgauge: CNC controlled Control Unit: CNC (Robosoft Synchro+ / original control – to be confirmed with the seller) Machine Dimensions (L × W × H): approx. 3.28 m × 1.20 m × 2.24 m Weight: approx. 4,500 kg Power Supply: 380 V Tooling is included.

Condition: repair required (used), Manufacturer: Amada Type: 5020 Year of construction: 1990, Number of axles: 3 Pressing force: 50t Bending length: 2000mm Sold without prisms, The machine works, moves, Error: End position of the Y-axis must be repaired. Isdpfjv Umm Ijx Ag Ueht Height adjustment is missing,

Condition: used, functionality: unexamined, Servo drives for press brakes. Used condition, removed from operational machines. Untested. Iodpox Dr Dasfx Ag Usht Please request further details and photos. We can purchase your faulty press brake.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 38,091 h, controller model: T 3000, bending force (max.): 66 t, working width: 2,000 mm, number of axes: 4, travel distance X-axis: 600 mm, TECHNICAL DETAILS Number of axes: 4 Working length: 2 m Max. press force: 66 t Travel ranges Stroke Y-axis: 200 mm Iedjwxtpvspfx Ag Uoht Travel X-axis: 600 mm Max. backgauge range in X: 880 mm Travel R-axis: 340 mm Distance between uprights: 2,364 mm Control Control system: T 3000 MACHINE DETAILS Length × Width: 2,600 × 1,750 mm Height: 2,330 mm Weight: 5,400 kg Electrical connection: 11 kVA Oil capacity (approx.): 100 l

Condition: good (used), functionality: fully functional, HYDRAULIC GADE BENDING MACHINE 4000X50, RECESS 500, MANUAL REGISTER, DIMENSIONS: 460X175X255(H) cm, WEIGHT: 6,700 Kg Ihedpfx Agjvxir Uo Uet

Condition: excellent (used), functionality: fully functional, Machine is in a very good condition, works with no problem at all! Ihjdpfjim Si Rjx Ag Uet Feel free to come and inspect machine under power upon appointment!

Condition: excellent (used), functionality: fully functional, Number of Straightening rolls: 7 plate width: 1665 mm plate thickness: 4 - 20 mm diameter of upper rolls: 4 x Ø 190 mm diameter of lower rolls: 3 x Ø 190 mm bending speed: 4 - 20 m/min weight of the machine ca: 11t dimensions of the machine ca.: 3,2 x 1,7 x 2,2 m We refurbished the machine three years ago. Ijdpfxowlg I Es Ag Ueht