Press brake

Schiavi RG 75/25

Condition: like new (used), TOOL FOR ROAD BARRIERS LENGHT 6000mm Csdpfx Aehylzroqveri

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 17,446 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA65, bending force (max.): 110 t, working width: 3,100 mm, number of axes: 8, oil tank capacity: 130 l, overall weight: 8,900 kg, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, power: 11 kW (14.96 HP), input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. Crodpfx Aqox N Ibhovoi The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Csdoxyhhaopfx Aqvjri Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible. Csdpsvamq Dofx Aqvjri

Year of construction: 2007, condition: ready for operation (used), A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible. Cedpfxov Dkcfs Aqvjri

Condition: used, Year of construction: 1990, pressure 25 t chamfer lenght 1250 mm distance between columns 970 mm Stroke beam 100 mm max. opening beam/table 270 mm C-recess 150 mm max travel X-axes 420 mm R1 and R2 axis controlled by cnc 100 mm Z1+Z2 axes controlled by cnc manuell mm Quick speed,inspeed 100 mm/sec bendingspeed 10 mm/sec opening speed 100 mm/sec length 1500 mm width 1000 mm height 2000 mm weight 1200 kg Credjy Ruw Eepfx Aqvoi total power requirement 4 kW dimensions of the machine ca. 1,5x1,0x2 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: defective spare-parts repository (used), Year of construction: 2004, machine/vehicle number: 20404881, Offer 23906 CNC - Flame Cutting Portal for Dismantling Technical data approx.: - CNC flame cutting portal with 4 torches as shown, for dismantling. - 4 x torches with automatic height adjustment - Torches feature tilt adjustment - CNC control unit NCE - Control cabinet - Track gauge approx. 3.5 m - Space requirement approx. 5 x 2.4 m Credpfjw Nwucox Aqvji

Condition: new, roller (top) diameter: 56 mm, roller diameter: 56 mm, sheet thickness steel (max.): 1 mm, - Capacity 1050 x 1 mm - Roll diameter 56 mm - Conical roller - Swiveling top roller - Foot control - Emergency stop Cjdpfx Asr Ixrksqvori - Documentation - 400V

Condition: used, Year of construction: 1994, CNC press brake Manufacturer: Blemas Type: 100-33 Cedpfx Asyvfkloqvjri Year of manufacture: 1994 CNC control: Cybelec DNC 74 PSG Press force: 100 tons Working width: 3 m Weight approx.: 8 tons Dimensions approx.: 3,600 x 1,600 x 2,600 mm 191026ä

Condition: used, Year of construction: 2001, Used hydraulic press brake Speedy - Model SC 16.5 CNC small - mobile - versatile Working length 550 mm Technical data: Year of manufacture: 11/2001 Manufacturer: TEDA Model: SC 16.5 CNC The machine is powered and can be inspected by appointment! Max. pressing force: 160 kN Max. return stroke force: 0.8 kN Distance between uprights: 380 mm Overhang: 200 mm Length, max: 550 mm Distance between table and ram: 400 mm Stroke, max: 250 mm Speed: - Approach, max: 100 mm/s - Working stroke, max: 10 mm/s - Return stroke, max: 125 mm/s Back gauge: X-axis – travel: 400 mm Rapid traverse: 200 mm/s Speed 50 mm before lower tool: 33 mm/s R-axis – travel: 120 mm Working pressure: 210 bar Installed power: 1.6 kVA Weight, unpacked: 1320 kg Connection voltage: 380 V Frequency: 50 Hz Measured settling time: 60 ms Safety distance: 96 mm Tool weight, max: Cedpfjzzafyex Aqvsri - Model 31301-90-P08 L=550 mm: 25 kg - Model 41004-85 L=550 mm: 8 kg Processable sheet metal cutouts (approximate values) - Dimensions: 550 x 800 mm - Thickness: 5 mm - Weight: 16 kg