Used press brakes with 0-49t bending force for sale (119)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 40 h, machine/vehicle number: C9s10075, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 22 t, working width: 900 mm, number of axes: 3, back gauge adjustment: CNC-controlled, overall weight: 1,800 kg, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, power: 5 kW (6.80 HP), warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, upper tooling, small electric press brake C9s CoastOne - Made in Finland Press force: 22T Bending length: 900mm Spindles: 1x22T Hedpfx Aezlhc Iokisw Control: TC15-2D graphics Back stop: 2-axis controlled X-R axes Press brake tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of folding tools incl. 36 months warranty after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 40 h, machine/vehicle number: C9S1077, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 22 t, working width: 900 mm, stroke length: 270 mm, distance between stands: 850 mm, installation height: 470 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 3, type of crowning: manual, back gauge adjustment: CNC-controlled, overall weight: 1,800 kg, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, small electric press brake C9s CoastOne - Made in Finland Press force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Hodpszlhfisfx Akijw Back stop: 2-axis controlled X-R axes Press brake tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of folding tools incl. 36 months warranty after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: ready for operation (used), Year of construction: 2020, controller manufacturer: DELEM, controller model: DA-66T, stroke length: 260 mm, number of axes: 4, overall weight: 8,400 kg, total height: 2,675 mm, This 4-axis Baykal APHS 31120 press brake was manufactured in 2020. It features a 120-ton press force, a bending length of 3100 mm, and a Delem 66t CNC control unit for precise operations. The backgauge X range extends to 1000 mm, and it includes European clamping with a sectioned punch and die. Consider the opportunity to buy this Baykal APHS 31120 press brake. Contact us for more information about this machine. Additional equipment • AC brushless servo driven backgauge with ballscrews • Proportional valve hydraulics: Rexroth or Hoerbiger • Precision linear scale measurement: Heidenhain or Givi Misure • European clamping system with 85° sectioned punch and 4-V die • Double footswitch console • Electrically interlocked side guards Hjdezbcnfjpfx Akisw Machine Benefits Technical Machine Benefits • System pressure: 280 bar • 4-axis press brake (y1, y2, x, r) • Distance between frames: 2550 mm • Throat gap: 410 mm • Max. Stroke adjustment: 260 mm • Backgauge x range: 1000 mm (x and x-r types) • Backgauge fingers: 2 pcs • Cnc crowning wedges on bottom table • Tooling is included in the offer • Excellent condition, almost like new Extra Information Movement Approach Speed: 160 mm/s Working Speed: 10 mm/s Return Speed: 130 mm/s Table Width: 60 mm Voltage: 400 V / 50 Hz / 3 Ph Delem 66t color graphical Windows CNC control unit Technical Specification Bending Length 3100 mm Dimensions Machine Depth 3850 mm

Condition: ready for operation (used), Year of construction: 2020, controller manufacturer: DELEM, controller model: DA-66T, number of axes: 4, overall weight: 23,500 kg, total height: 3,470 mm, This 4-axis Baykal APHS 31440 press brake was manufactured in 2020. It features a pressing force of 440 tons, a bending length of 3100 mm, and a stroke length of 330 mm. With a motor power of 35 kW and a machine weight of 23500 kg, it includes CNC crowning and a European clamping system. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31440 machine we have for sale. Contact us for more information. Additional equipment • Control Console: Double footswitch console Machine Benefits Technical Machine Benefits Hsdpfozbcm Usx Akiew • Machine in excellent condition, with very low working hours – practically like new • Some tools are included in the offer • Stroke axes: Y1–Y2 cnc controlled • Backgauge x range: 1000 mm • Backgauge fingers: 2 pcs • Stroke length: 330 mm Extra Information Tools Upper Tool Weight: 700 kg Lower Tool Weight: 1200 kg Clamping System: Heavy duty top clamping system Tooling System: European clamping system with 85° sectioned punch and 4-V die Crowning: CNC crowning on bottom table Front Support Arms: 2 pcs on linear rail Safety: Electrically interlocked side guards, light barriers Dimensions Machine Depth 4100 mm Technical Specification Bending Length 3100 mm

Condition: excellent (used), Year of construction: 1999, 6-axis press brake Location available upon request. Hjdoznipujpfx Akiow

Condition: used, Year of construction: 2022, gebraucht 2022 8254 prompt, Zwischenverkauf v Türkei 22240 € 1 30 to 1250 mm X und Y Achse 150 mm 1010 mm 255 mm 265 mm hydraulisch 210 mm/s 10 mm/s 3 kW 1760 mm 1375 mm 2135 mm 1700 kg DEMO MACHINE, MINT CONDITION NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN incl. laser protection device Fiessler (sample photo) BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Hedpfjwirqyox Akiew Details:

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1962, machine/vehicle number: E 557, stroke length: 125 mm, overall weight: 3,900 kg, pressing force: 40 t, table length: 1,000 mm, table width: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force Max. press force: 40 t Stroke: 125 mm Max. operating pressure: 15.7 MPa Installation height: 650 mm Stand extension: 400 mm Ram adjustment: 125 mm Work table Table length: 1,000 mm Table width: 400 mm MACHINE DETAILS Machine type: Hydraulic press brake Type: E 40-1000 Year of manufacture: 1962 Hjdpfx Akjz Izdnoijw Factory number: E 557 Total weight: 3,900 kg Condition: Used, fully functional

Condition: as good as new (ex-display), Year of construction: 2023, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1200 mm column arm 200 mm ram stroke speed 60.0 mm/sec return speed 80. mm/sec work speed 60.0 mm/sec work stroke 100 mm table height 760 mm table width 150 mm oil volume 130 ltr. voltage 400 Volt Control ESA E21 total power requirement 4.0 kW Hjdpfxjxabumj Akiew weight 3030 kg range L-W-H 2050 x 1800 x 2030 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation)

Condition: as good as new (ex-display), Year of construction: 2022, Features: - E-Control 20 Dual Screen with bending sequence simulation - 6-axis back gauge with 100 mm stroke (right ±50 mm) - E-Bend S sensor for thickness control on Z1 - Wila NSCR-II HC Premium table - Wila NSCL-II HC Premium tool holder - Pair of front sheet metal supports Hsdpfxsz A Tg Do Akijw - Bending force: 500 kN - Usable bending length: 2,040 mm - Usable stroke: 300 mm - Maximum opening: 590 mm - Rapid approach speed: 160 mm/sec - Interface for Industry 4.0 - Standard tool kit

Condition: ready for operation (used), Year of construction: 2014, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1100 mm stroke of upper beam 100 mm throat 195 mm working feed 10.0 mm/sec return speed 70.0 mm/sec 180 bar work height max. 840 mm table width 110 mm dayligth 295 mm Control ATS 585 total power requirement 5.5 kW weight 2500 kg range L-W-H 2100 x 1200 x 1800 mm - in checked conditions - machinevideo - ?v=l9CdurfDGb0 Features: - NC-controlled hydraulic press brake - with ATLANTIC NC control "ATS 585" * Rear stop positioning (X-axis) * Depth adjustment positioning (Y1, Y2 axes) * Ability to program various programs * Swiveling control panel, front left * Tool and program library - NC electric-motor-driven material/backgauge (X-axis) * With 2 stop fingers, manually adjustable (R and Z axes) - Tool holder system A - with upper wedge camber - Split insert/bending tools - DSP LASER "RX" safety device - front - 2x side, swiveling safety doors - 1x freely movable double foot control - Operating instructions Hedpfx Aey Nd Tyjkiow Also included in the scope of delivery (pre-installed): - 1x brand-new / split set of upper tools * UKB 11,200 mm - 2x 835 mm * Angle 85° - Radius R 0.8 mm - Height 66.5 mm * Load capacity 1000 kN/m max - 1x brand-new / split set of lower tooling * UKB 21.207 - 2x 835 mm * V-openings = 16/22/35/50 mm * Angle 85° * Load capacity 800 kN/m max.

Condition: as good as new (ex-display), Year of construction: 2023, Adira E-Brake BB base configuration: Adira Electric Press Brake - AD 75 control system (Y1/Y2, X, R, Z1/Z2) with 3D graphical programming and automatic sequence optimization, (BG1 for BB3515 and BG2 for 5020) - Bluedrive technology - Standard table with basic 60 mm Promecam dies - Promecam quick-release upper tool holder - 2 front supports on a 500 mm guide rail - IRIS safety light curtains Hsdpfx Akez A Thhsiow - CE safety compliance - Standard tooling kit - Robot interface

Condition: new, functionality: fully functional, Year of construction: 2026, controller model: Estun NC E21, stroke length: 100 mm, throat depth: 180 mm, operating speed: 9 mm/s, reverse speed: 80 mm/s, table height: 290 mm, overall weight: 1,500 kg, total length: 1,500 mm, total width: 1,300 mm, total height: 1,800 mm, input voltage: 400 V, input current: 380 A, pressing force: 40 t, clearance between the columns: 900 mm, ram plate length: 500 mm, retraction force: 40 t, table length: 1,320 mm, type of input current: three-phase, motor manufacturer: Siemens, Equipment: CE marking, documentation/manual, hydraulics, safety light barrier, The Digima WCY-40T/1320 hydraulic press brake is a compact and robust machine designed for the precise bending of sheet metal and smaller metal components. Its space-saving dimensions make it an excellent choice for metalworking workshops, manufacturing plants and companies producing enclosures, guards, panels, profiles and various technical components. The machine provides a nominal pressing force of 400 kN, equivalent to 40 tonnes, and a working-table length of 1,320 mm. The distance between the columns is 900 mm, the throat depth is 180 mm, the ram stroke is 100 mm, and the maximum open height is 290 mm. The back gauge offers an adjustment range of up to 500 mm, enabling the sheet to be positioned accurately before bending. The Digima WCY-40T/1320 is equipped with an Estun E21 NC control system, which controls the position of the back gauge on the X axis and the working position of the Y axis. The controller includes an operation counter, intelligent positioning, screw-backlash compensation and a function that retains the programmed position after the power supply has been switched off. A positioning resolution of 0.1 mm or 0.01 mm supports accurate and repeatable production. The press brake is powered by a 3 kW Siemens main motor. Its hydraulic system uses Bosch-Rexroth components and a Sunny hydraulic pump, while the electrical system includes Schneider Electric components. PARKER seals and guide rings increase the durability of the working mechanisms and support reliable operation during intensive daily use. The ram approach and return speeds are 80 mm/s, while the working pressing speed is 9 mm/s. These parameters enable efficient machine positioning and smooth bending operations. The rigid monoblock steel frame is welded and heat-treated to provide high structural stability and resistance to deformation under load. The machine is equipped with side guards, a front safety curtain, protection against excessive hydraulic pressure and high oil temperature, motor overload protection, electrical leakage protection and a safety relay. The electrical cabinet has an IP65 protection rating, and the press brake is CE-certified. Hsdpezlqkujfx Akijw The standard equipment includes bending tools, two front material-support arms, a foot-control pedal, foundation bolts, spare sealing rings and mechanical and electrical documentation. The upper punch features an 86° working angle and an R0.5 tip radius, while the multi-V lower die allows the operator to select a suitable bending position according to the type and thickness of the material. The Digima WCY-40T/1320 is a practical, user-friendly and economical press brake for companies requiring a reliable machine for the everyday processing of small and medium-sized components. Its combination of a 40-tonne pressing force, a 1,320 mm working length, NC control and high-quality branded components makes it suitable for both one-off projects and small batches of repeatable parts.

Condition: good (used), Year of construction: 1995, throat depth: 300 mm, distance between stands: 1,350 mm, overall weight: 1,900 kg, total length: 2,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 4 kW (5.44 HP), pressing force: 35 t, Bending length 1600 mm, capacity 35 to, gap between column 1350 mm, stroke 150 mm, throat gap 300 mm, motor 4 KW, back gauge 500 mm motorized, dimension 2100x1500x1800 mm, weigth ca. 1900 kgs Hodozula Aopfx Akiow

Condition: like new (used), pressing force: 50 t, – Capacity: 1600 x 30 tons – NC control (touchscreen) – 2 hydraulic cylinders Hodpfx Akezgf S Ajisw – Foot pedal operation – Light curtain safety system – Emergency stop – Lighting – Documentation – 400V

Condition: excellent (used), Year of construction: 2009, pressure 40.0 t chamfer lenght 1250 mm distance between columns 890 mm Hjdpszyvbhsfx Akijw work stroke 100 mm dayligth 300 mm column arm 200 mm table width 140 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 90.0 mm/sec tank 63.0 l total power requirement 3.0 kW weight of the machine ca. 2000 kg range L-W-H 1555 x 1075 x 2149 mm from a vocational training workshop very good condition (!) Features: - conventional hydraulic press brake - swiveling control unit (front left) - electric backgauge (X-axis) * incl. digital display for gauge position * movement via electric push-buttons (creep and rapid traverse speeds) - manual adjustment of bending depth (Y1 + Y2 axes) * handwheel with analog position indicator - 2x manually adjustable gauge fingers (R + Z axes) - 1x upper tool - 1x reversible universal die block - pressure gauge / pressure indicator - 1x mobile control unit

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 5 h, machine/vehicle number: C9100374, control type: NC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 22 t, working width: 900 mm, stroke length: 270 mm, distance between stands: 850 mm, installation height: 470 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, number of axes: 3, type of crowning: manual, overall weight: 1,800 kg, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, warranty duration: 36 months, pressing force: 22 t, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Hedpfx Akszyl R Soiew Control: TC15-2D graphic Light barrier: Lazersafe IRIS Back stop: 2 axis controlled X-R axes Bending tool holder: Type AMADA Promecam / A / R1 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, operating hours: 49,000 h, Press force / bending length: 500 kN / 1275 mm TrumaBend control system / standard: 2D graphic control, color, DELEM. Hedpfx Ajz I Sd Ejkisw

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, operating hours: 44,000 h, Press force / bending length: 500 kN / 1275 mm Hedpsz I Sh Rsfx Akiew TrumaBend control system / standard: 2D graphic control, color, DELEM.

Condition: good (used), For sale: PROMECAM PPH 25.12B press brake – French made. Hsdpfxszyyi No Akisw AMADA PROMECAM *Technical specifications:* - Force: 25 tons - Usable length: 1250 mm - Motorized back gauge on Y-axis and manual back gauge on X-axis, with digital readout on a remote control panel (2 counters) New 2009 tooling including dies and new 1010 punches. Videos available upon request.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: TO5_7, control type: CNC control, degree of automation: manual, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 5 t, working width: 350 mm, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 2, type of crowning: manual, back gauge adjustment: CNC-controlled, overall weight: 375 kg, power: 3 kW (4.08 HP), warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included Hodez H Txuepfx Akiew 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: ready for operation (used), Year of construction: 2010, pressure 40.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 200 mm stroke 100 mm dayligth 308 mm ajustment speed 150 mm/sec working feed 1-10 mm/sec return speed 100 mm/sec table width 100 mm table height 900 mm control DNC 60 PS oil volume 100 l voltage 400 V total power requirement 5.5 kW weight of the machine ca. 2750 kg - in checked conditions - machinevideo - ?v=WRzqKruFUvY Equipment: - CNC electro-hydraulic press brake - CYBELEC "DNC 60 PS" CNC control * Swiveling control panel, front left * Tool & program library - CNC electro-motorized backgauge (X-axis) Hedpfx Asx Emqtjkiew * X-axis travel = 800 mm * 2x manually adjustable backgauge fingers (R+Z axes) * Backgauge on ball screws - CNC controlled axes Y1 - Y2 - X - Rehfuß upper tool system "A" with quick-change clamping * Additional crowning device in the tool holder - 4V universal die block with 60 mm die shoe - 2x sliding material/support arms ("Sliding System") - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine - FIESSLER AKAS laser safety device in front of the machine - 1x freely movable Double Foot Switch - Operating Instructions (PDF)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 4,846 h, stroke length: 215 mm, number of axes: 4, travel distance X-axis: 1,000 mm, overall weight: 5,400 kg, total width: 1,470 mm, total height: 2,250 mm, pressing force: 41 t, product length (max.): 1,550 mm, This 4-axis Baykal APHS 125040 press brake was manufactured in 2021. It features a bending length of 1250 mm and a pressing force of 40 tons, ensuring robust performance. The machine has a throat depth of 410 mm and a stroke of ram measuring 215 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 125040 press brake we have for sale. Contact us for further details. Hodozdkx Ajpfx Akiew • Distance between columns: 1070 mm • Throat depth: 410 mm • Daylight opening: 455 mm • Stroke of ram: 215 mm • Table width: 60 mm • Main motor power: 5.5 kW • Hydraulic oil capacity: 140 liters Technical Specification Bending Length 1250 mm

Condition: used, functionality: fully functional, Year of construction: 2007, overall weight: 3,500 kg, total length: 1,600 mm, total width: 1,500 mm, total height: 2,200 mm, pressing force: 28 t, Bending length: 835 mm Back gauge travel range: 0 - 370 mm Stroke: 200 mm Distance between frames (clearance): 890 mm Support tables (L x W): 200 × 275 mm Throat depth: 200 mm Installation height: 325 mm Hodpfxoy N Umkj Akiow Number of cylinders: 1 Working speed Pressing stroke: 8-10 mm/s Return: max. 35 mm/s Ram positioning accuracy: +/- 0.05 mm Operating manual available

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: TO5_5, control type: CNC control, degree of automation: manual, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 5 t, working width: 350 mm, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 2, type of crowning: manual, back gauge adjustment: CNC-controlled, overall weight: 375 kg, power: 3 kW (4.08 HP), warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Hedpjzwngkofx Akisw Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: ready for operation (used), Year of construction: 2009, controller manufacturer: CYBELEC, controller model: DNC 60, number of axes: 3, total height: 2,500 mm, pressing force: 25 t, product length (max.): 2,300 mm, This 3-axis ADIRA QHD-2512 PLC press brake was manufactured in 2009. It features a Cybelec DNC 60 control unit, a pressing force of 245 kN, and a bending length of 1330 mm. The distance between columns is 1250 mm, and it operates at a working speed of 8 mm/s. If you are looking to get high-quality bending capabilities, consider the ADIRA QHD-2512 PLC machine we have for sale. Contact us for more information about this machine. • Distance between columns: 1250 mm Hjdpfx Akjzia Dfoisw • Number of CNC axes: 3 • Working speed: 8 mm/s • Main voltage: 400 V • Frequency: 50 Hz • Phase: 3-phase • Tool clamping type: PROMECAN Amada • Condition: Good, working condition • Status: Currently disconnected; possible to check under power Technical Specification Bending Length 1330 mm