Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x1295x1300 mm Crobevz Egto E H Ty Ssb Weight 1500 kg Total power requirement 16,1 kw

Condition: used, Year of construction: 1988, Sliding table movement: manual. Number of material clamps: 1. Material clamping: pneumatic. Crosscut saw: rigid from below. Max. saw blade diameter: 400 mm. Max. cutting height: 120 mm. Saw shaft diameter: 30 mm. Crosscut saw motor power: 2.2 kW. Milling spindle: 40 mm diameter, stroke 80 mm. Handwheel. Spindle motor power: 5.5 kW. Crjb E H Tsv Rbdmsy Sob Storage location: Nattheim

Condition: like new (used), Year of construction: 1998, operating hours: 300 h, Functionality: fully functional, machine/vehicle number: 9800491, Shaft size 30mm, -5 to +45 degrees, Aigner milling stop, table extension, Festo 3-roll feed, control panel, five speeds, left and right rotation, work switch, motor protection, shaft stop, manual, emergency stop, motor brake, CE approval Cjb E Hou Egq Ee Ty Sjrb

Condition: excellent (used), Year of construction: 2012, Tilting spindle milling machine 45° tilting on both sides Manufacturer: Martin Type: TS 200 Year of manufacture: 2012 Table size: 1,700 x 750 mm Extendable front support: 360 mm Spindle tilt adjustment: -45° to +45° Useful height with diameters 30-35 mm: 140 mm Cjb E Hov Ubc Rj Ty Ssrb Useful height with diameters 40-50 mm: 180 mm Spindle stroke height: 100 mm Spindle diameter: 30 mm, 40 mm spindle included Speeds: 1,500 - 3,000 - 4,500 - 6,000 - 9,000 rpm Motor power: 7.5 kW Motor brake: Yes Weight: approx. 680 kg

Condition: new, Code: N0003 Cjbsd E U Hdo E H Ty Sorb Tenoning device with presser to block the pieces

Condition: new, Year of construction: 2024, Functionality: fully functional, height adjustment type: electric, power: 7.5 kW (10.20 HP), Tiltable spindle moulder HOFMANN TFS 107 Basic equipment: 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Paint finish: gray-white/signal blue Crebou Nz Ndj E H Ty Ssb Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1780x850x1250 mm Crsb E H Tyovz Egae Seb Weight 1000 kg Total power requirement 12 kw

Condition: used, Year of construction: 1985, Table length: 2500 mmSpindle adjustment range: 120 mmTable width: 760 mmDesign: swivelingSwivel angle forwards: + 45°Swivel angle backwards: - 5°Extendable frame support:Selection of speeds: Belt change+pole switchingCone of the milling spindle: MK 5Material of stand: Cast ironControl panel position: topSpindle height adjustment: Handwheel and electricSpindle swivel adjustment: Handwheel with dial gaugeSpindle lock: ManualSpindle brakes: ElectricSpindle direction: Left/right rotationMotor power: 4.7 / 5.7 kWClosing of the table opening: Insert segmentStop jaw design: Aigner jawsStop adjustment: ManualMilling stop display: ScaleMilling jaw adjustment: ManualFeed device: Yes, 4 rollers HaffnerFeed setting: Fixed speedsDimensions: 2500 x 1500 x 1900 mm Storage location: Supplier Crsb E H Tjv Rbb Eoy Sjb

Condition: ready for operation (used), Year of construction: 2008, Main Drive Number of spindles 2 Number of axis 3 Movement X-Axis Movement 3780 mm X-Axis Rapid Traverse 96 m/min Y-Axis Movement 1951 mm Y-Axis Rapid Traverse 96 m/min Z-Axis Movement 155 mm Z-Axis Rapid Traverse 25 m/min Crsb E Hev Nb D Re Ty Sob This 3-axis Weeke Optimat BHP Vantage 34M was manufactured in 2008. Ideal for precision CNC routing, this machine offers robust construction and reliable performance. If you are looking to get high-quality routing capabilities, consider the Weeke Optimat BHP Vantage 34M machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: new, Year of construction: 2024, STOMANA T 1000 S Dimensions of the work table, mm 1000 x 550 Dimensions of the movable table, mm 1150 x 350 Spindle diameter, mm 30 Spindle tilting 90° / 45° Vertical travel of the spindle, mm 175 Spindle working height, mm 125 tool diameter, mm: - for shaping - for machining of journals diam. 180 Wed. 250 Engine power, kW (HP) 4.0 (5.5) Revolutions, min-1 1400 / 3500 / 6000 / 8000 Weight, (kg) 390 Telescopic guide bar 900 with 2 stops: Left / right spindle rotation: Creb E H Tyollun Ns Ssb Spindle protection for profiling, mm dia. 250

Condition: good (used), Code: 0327 Brand: SCM Crjb E H Tjtwc E Aoy Ssb Model: R/9 Router with automatic copying device for producing wooden elements, templates, chairs, contours, mirrors, special profiles Automatic copying device: Roller drive system (one movable and one fixed, coaxial with the tool) that automatically advances the workpieces, placed over a template Distance between spindle and column mm 915 Spindle vertical stroke mm 110 Table vertical stroke mm 200 Max distance between table and spindle mm 310 Conical connection MK 2 Rotation speed 10000/20000 rpm Motor Hp 5,5 Table dimension mm 900 x 750 Compressed air 6 bar Overall dimensions mm 1300 x 1650 x 1650 h Weight kg 680

Condition: used, Year of construction: 1985, Functionality: fully functional, machine/vehicle number: V 139200, overall weight: 1,200 kg, table length: 1,180 mm, table height: 840 mm, table width: 800 mm, MARTIN T25 Tilting Spindle Router In very good condition, everything works perfectly All bearings and guides are OK, the machine runs flawlessly Year of manufacture: 1985 A stop jaw on the router stop can be adjusted in depth, with fine adjustment and a scale, allowing planing work, e.g., with a glued profile. With spindle lock via lever 2 extraction nozzles, 125 mm on the router stop and 100 mm on the machine table 30 mm spindle, continuously electrically adjustable from -5 to 45° With right/left rotation Table opening up to 480 mm, which can be reduced using various rings Cjb Eowdvvvo H Ty Serb Electric spindle height adjustment Very robust and durable design Optimal power transmission via V-belt drive With manual Including AIGNER integral stop jaws Including 4 Wegoma rollers, continuously adjustable feed, in mint condition Condition Machine table dimensions: 1180 + 800 mm Machine is ready for immediate use 380V, 5000 and 6000W with 2 speeds with all necessary safety features, motor brake, and emergency stop switch. The machine is approved by the German Wood Industry Association (Holz-BG) and has the GS and CE test seals. The machine weighs approximately 1200 kg Professional device

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x1220x1300 mm Weight 1050 kg Total power requirement 16,1 kw Ceb E Hevz Ef Aj Ty Sjrb

Condition: used, Hofmann TFS 107 heavy-duty tilting spindle milling machine Electrically tiltable spindle on both sides, diameter 30 mm Swivel range -45.5° / +45.5° Spindle rotation left/right Motorized spindle height and tilt adjustment with LED displays Crjb E H Tyowc N Tfo Sob Milling spindle with variable speed from 1,500 - 10,000 rpm Milling stop 2620 with cast-iron jaws and safety rulers Overall adjustment via handwheel and LCD display Digital display for individual jaw adjustment Motor 7.5 kW Table length 2000 mm Including 4-roller feeder Year of manufacture 2019 Machine is in perfect working order and in very good condition Retired from a carpentry workshop Ex works

Condition: used, Year of construction: 1966, Used Machine Milling Rotor with 7 Spindles 6.2/7.5 HP Motor After setting the milling tools and the stop ruler once, they can be returned to the working position again and again without any adjustment work. By simply turning the rotor further, the selected spindle moves under the table opening and is brought into the working position by two turns of the handwheel located on the right side of the machine. It is ready for use without a test milling run. This takes approximately 10 to 20 seconds. Speeds from 3000 - 10000 rpm can be preselected and switched from the outside in 6 steps. Milling stop with 8-position turret head. Max. tool diameter: 190 mm Table size: 1300 x 1050 mm Table height: 810 mm Usable milling spindle height: 125 mm Milling spindle diameter: 30 mm Crob E H Tyjv Ntdpe Seb Weight: approx. 1100 kg with Saoamad glazing bead cutting saw with Samco 8-roller feeder Availability: Short-term Storage location: Hochheim

Condition: new, Year of construction: 2024, ROBLAND T 120 TP voltage 3 x 230V / 3 x 400V weight 1070 kg motor power 7 kW (optional 9.2 kW) table dimensions 1200 x 705 mm table height 930 mm interchangeable spindle diameters 30 / 32 / 40 / 50 mm 1" 1/4 spindle length 180 mm height adjustment 205 mm number of revolutions per minute 3000 / 4500 / 6000 / 7000 / 10000 Crsb E Hjllup Re Ty Sob max diameter and height of the table 320 x 95 mm dimensions of the movable table 760 x 500 mm table height adjustment 1050 mm diameter of the extraction spigot 120 mm

Condition: good (used), Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Crjberc Dgmo E H Ty Ssb Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130

Condition: used, Motor power: 10.0 PS/HP (7.35 kW), milling unit with controlled height and angle adjustment, milling spindle lock from outside, max. milling cutter diameter 250 mm, table size 1160x770 mm, milling stop rail set INTEGRAL Cjb E Hsvwl D Rj Ty Sjrb

Year of construction: 2006, Condition: excellent (used), Swing angle 135 Motor 1.1 kW table height 860 mm table surface 800×1000 mm spindle dimension 28 x 90 mm spindle speed 1500 rpm with feed unit: Fields S/308, year 2011 Ceb E H Tshr D Ayjy Sorb and accessories

Condition: used, Heavy-duty spindle moulder SCM T 160 Automatic tilting – 45° Automatic up/down Crebsv D H Uks E H Ty Sjb Milling spindle with 5 speeds: 2900 to 10,000 rpm Motor approx. 7.5 HP Including 3-roller feeder Machine is in working order Ex works NET €2,900.00

Condition: used, Year of construction: 1995, CAMAM GC6/6F-2L rotary milling machine Number of milling units 6, grinding units 2 Maximum width of material 250mm The maximum height of the material 150mm Maximum length of material 1200mm Cob E H Tyeur Htle Ssrb Feed speed adjustable 0-17m/min Machine in the cabin

Condition: used, Year of construction: 1990, used, good conditionMake Panhanstype 240Year of construction 1990Machine no. 212Motor boosted 11 kWswiveling from -5 to +45Speed levels 3000 / 4500 / 6000 / 9000 ht-left runTable size 1350mm x 800mmTable top extension approx. 600/2400 mmFrame support extendableMilling arbor diameter 30 mmcast stop jawsMilling fence with fine adjustmentElectric height adjustment, tiltingDigital displays for swivel spindle spindle heightPower socket for feederExtraction connection D 2 x 120 mmSpace requirement approx. 2500 mm x 1300 mm x 1300 mmWeight approx. 1100 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Csb Ejvwfx Ue H Ty Sorb

Condition: good (used), Code: 0012 Brand: SCM Model: R/9 - CE Standard Router for milling and copying operations on wood, composite materials, plastics and various materials - CE Standard Technical data Crjb E H Tevua N Noy Sob Distance between spindle and column mm 915 Spindle vertical stroke mm 110 Table vertical stroke mm 180 Max distance between table and spindle mm 300 Conical shank MK 2 Spindle rotation speed rpm 10000/20000 Main motor power Hp 5,5 N° 6 adjustable depth stops Table dimensions mm 1500 x 1180 Pneumatic head lowering Table support square Suction mouth diameter mm 120 Compressed air 6 atm Overall dimensions mm 1500 x 2000 x 1700 h Weight kg 750

Condition: like new (used), Year of construction: 2022, power: 6 kW (8.16 HP), Mafell ZAF 250 demonstration machine (max. 2-3 used for demonstration purposes) Item No.: 991201 Included in delivery: -1 milling head, complete with reversible blade; Order No. 202105 -1 support table, Order No. 205025 Maximum timber dimensions (W x H) at right angles: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Length of support with scale: 3000 mm Feed speed: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idle speed: 6670 rpm Nominal power consumption: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly, accurately, and efficiently. -Straight tenons, angled tenons, corner and ridge joints - with the compact ZAF 250 Vario, you're on the safe side. -An exact length scale can be adjusted using a stop. -The milling tool, specially developed for the ZAF 250, can be quickly adjusted for different tenon lengths and for tangential milling. Csb E H Tyewazn Ae Ssrb -The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. A built-in laser assists you in the exact positioning of the wood. Result: Milling cuts accurate to the millimeter in any wood! -After setting the tenon geometry, the milling head automatically follows the tenon shape and delivers the desired tenon – including face-off, shouldering, and chamfering. -The ZAF 250 Vario has an adjustable feed rate for hardwood applications. Area of application: -Tenon and tangential milling up to 60° -Materials used, e.g., solid wood and laminated timber Advantages: -Significant time savings – thanks to simple and quick adjustment of length, angle, and tenon dimensions. -Maximum wood dimensions: 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – the pivoting head ensures the workpiece always remains in the same position. -No wood waste – fully vacuumable.

Year of construction: 2006, Condition: excellent (used), The BACCI FC 8 machine is an advanced device designed for copying, milling, and sanding wooden components, such as parts for chairs, tables, furniture, bed frames, and other complex-shaped elements. Its high precision and exceptional finishing quality make it highly regarded in the furniture industry. This model is equipped with 8 working heads, allowing for the simultaneous execution of multiple machining operations. The numerical control system (CNC) enables precise machine settings and easy programming. This allows operators to quickly adapt the machine for various tasks, significantly increasing productivity. Specifications: - Machine number: 1680 - Power supply: 380V, 50Hz, 86kW - Max machining length (X-axis): 2500 mm - Unit strokes: A, B, C, D, U, V, W - Z-axis travel: 370 mm - Worktable tilt angles: -10°, 0°, 10° - Max vertical spindle travel: 20 mm - Spindle diameter: 40 mm Maximum tool size: - Diameter x Height: 160 x 180 mm - Sandpaper size (L x W): 2360–2400 x 180 mm Spindle speeds: - Spindles 1-A and 2-B: 8500 RPM - Spindles 3-C, 4-D, 5-U, 6-V, 7-W, 8-Z: 500–8500 RPM Power and air requirements: - Total installed power: 120 kW - Air pressure: 6 bar Machining capacities: - Max machining length (with standard rounding): 250 mm - Max processing width (with rounding): 500 mm - Max processing height: 180 mm Speed and acceleration: - Max table feed speed: 30 m/min - Max table return speed: 100 m/min - Max aggregate acceleration: 5 m/sec² Aggregates: - Milling units (1+1): with 15 HP motors - Milling units (1+1): with 10 HP motors - Milling/sanding units (1+1): with dual-polarity motors, 6.5 to 4 HP - Sanding units (1+1): with 4 HP motors Additional features: - Control system: OSAI Crsb E Hjpy D Ace Ty Sob - Machine weight: approx. 750 kg - Machine dimensions: 4000 x 2400 x 2000 mm - Packing weight: approx. 1500 kg