Torque wrench 1/2 inch with 3 wheel nut caps 40 to 210 NM (GERE-00216) Make : Seneca Connection: 1/2 inch Includes 3 wheel nut caps (17, 19 and 21 mm) 250 mm extension piece, 25 cm Reach: from 40 to 210 Nm. Torque wrenches and special wheel nut wrenches If you are looking for handy wrenches to tighten nuts, then a torque wrench is the solution for you. With a torque wrench, you will need to purchase a set of sockets. In a torque wrench you can set how tight the nuts can be tightened. This ensure...
Measuring plate with T-slot for screwing a measuring column
Briqkvjt3q
on a base frame
Technical data:
Length 770 mm
width 760 mm
panel height 40 mm
panel height with ribbing 200 mm
on base frame
with
- 1 T-slot
used
Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod
-Manufacturer: WARNER ELECTRIC
-Spindles: are not used
-Type:
Beppkq2cjd
-Thread diameter: 39 mm
-Thread pitch: 5 mm
-Thread length: 455 mm
-Total length: 630 mm
-Number: 18x spindles available
-Price: per piece
-Weight: 6.3 kg
Very neat press brake from UZMA
Type: CAP 40175 A.
Capacity: 4100 x 175 tons
Delem DA 66 Touch CNC
CNC Crowning
Csi38ufc
6 axis CNC controlled Y1, Y2, X, R, Z1 and Z2
ask for an offer from Seegräber GmbH
Do3dhlzb
Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod
-Manufacturer: WARNER ELECTRIC
-Spindles are: unused
-Type:
-Thread diameter: 39 mm
-Thread pitch: 5 mm
Bepplnotfg
-Thread length: 405 mm
-Total length: 580 mm
-Number: 17x spindles available
-Price: per piece
-Weight: 5.9 kg
bushing cut-off
diameter range 8 mm
number of dies 5
Bk7wb0yqky
number of stations (incl. cut off) 6
cutting length 10 mm
shaft length under head 15 mm
output - pieces/min 310
MITRE Cap saw for aluminum (special machine building)
Year of manufacture 2002
Bc9vfjzgkx
Saw blade diameter 400 mm
Cutting area at 90 ° round ø 180
Rectangle 350 x 140 mm (longitudinal)
Cutting area at 45 ° round ø 180
Rectangle 350 x 100 mm (longitudinal)
Führunslänge base support 1100 mm
Infrastructure on the base support (forward backward) 650 mm
Infrastructure on the stand (up-down) 120 mm
Blade speed until about 3000 rpm (stepless)
Motor 2,2 kW
Power supply 400 Volt, 50 Hz
-controlled long...
Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod
Nltbh
-Manufacturer: WARNER ELECTRIC
-Spindles are: unused
-Type:
-Thread diameter: 39 mm
-Thread pitch: 5 mm
-Thread length: 505 mm
-Total length: 680 mm
-Number: 3x spindles available
-Price: per piece
-Weight: 6.8 kg
thread diamter 12-20mm
output - pieces/min 70-140
Bexocb2292
Complete line manufacture pallets. Capacity: 15,000 Tn/year, 3Tn/hour approx. Composed by: Chipping "Franssons", mod. HK 45G (2013),power: 160kW. with its cyclone, feed hopper and elevator for feeding the tromel "FND- Agricultural facilities" (2013). Oven with feed hopper, adiabatic chamber and shredder "Tezasa", Mod. DT-21, (2002). Tromel. Transport system to pelletizing lung silo (2013), has a sleeve filter "Donaldson" (2013). Press - Pelletizer "Munch" Mod.: Presse RMP 650/105, chap.: 3Tn/hou...
Mitre crosscut saw, circular saw for aluminium PEDRAZZOLI type PERRIS 350
No. 9102922 Year of construction approx. 1995
Saw blade diameter 350 mm
Sawing range at 90° Round Ø 120 mm
Sawing range at 90° square 100 x 100 mm
Sawing range for 90° rectangle 150 x 100 mm
Sawing range at 45° Round Ø 120 mm
Sawing range at 90° square 100 x 100
Sawing range at 45° rectangle 120 x 100 mm
Mitre cut +/- 45° tiltable
Saw head 45° tiltable
Working height 850 mm
Compressed air supply approx. 2 to 6 bar
Saw blad...
Abholpreis
Transport gegen Aufpreis möglich, bitte erfragen !
Bezahlung:
Barzahlung bei Abholung
Ydtdw
Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories
-for T-slot: 48 mm
-Clamping height up to: approx. 300 mm
-Clamping depth: 140 mm
Gfwwvph
-Price: per piece
-Number: 5 pieces
-Dimensions: 200/100/H450 mm
-Weight: 4.2 kg
thread diameter M20-M33
max. width acros flats 48 mm
max. outside dia. of round pieces 32-53 mm
bar dia. 38 mm
cutting length 15-60 mm
basic weight of piece de forge 60-240 g
number of forming stations 3
C0ycm3fq
press power 105 to
400 V
50 HZ
0,37 KW
Br8go77hfu
Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories
-for T-slot: 30 mm
-Clamping height up to: approx. 300 mm
Blodg9di
-Clamping depth: 140 mm
-Price: per piece
-Number: 10 pieces
-Dimensions: 180/80/H440 mm
-Weight: 2.6 kg
Press brake CNC CAP 20040
Producer: Uzma
Bttkm0i9bv
YP: 2010
Cybelec control... DNC 880S
Force of pressure... 606
Bending length... 2100mm
controlled axes... 4
Machine is in good technical condition.
For further information please contact the seller.
Bqlhhsdoee
Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories
-for T-slot: 48 mm
-Clamping height up to: approx. 350 mm
-Clamping depth: 120 mm
-Price: per piece
-Number: 5 pieces
-Dimensions: 180/100/H510 mm
Nmjxf
-Weight: 4.2 kg
The machine is used for cutting valve caps and plates without measuring or marking. It can also be used as circular cutter.
Bsxogpxmd8
6-head roll-on capper for BVS30/60 closures including 1 spare head. Capacity up to 9.000 bph. Formats for 0,75lt Schlegl; 0,75lt Bordeaux; 1,0lt Schlegl and 1,0lt Bordeaux available. Was not in operation much, because on this line mostly a different closure was produced. Heads have a quick change closure. Capsule control included.
Available from June/July 2021 as the machine will be in service until then.
Kggqaqg
For further information please contact the seller.
Bqlhlerruq
Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories
-for T-slot: 45 mm
-Clamping height up to: approx. 500 mm
-Clamping depth: 120 mm
-Price: per piece
-Number: 4 pieces
-Dimensions: 180/80/H650 mm
-Weight: 4.8 kg
Stea2g
Wheel nut wrench 21 mm, crowbar, wrench, wheel nut wrench, spanner (GERE-01158). Size: 21 mm With crowbar part the crowbar length is 40 cm The cap side length (sloping part) is 11 cm including cap. Chrome vanadium version. Wheel nut wrench 21 mm, Wheel wrench, Spanner, Wheel wrench. The wheel nut wrench with telescopic handle is designed for unscrewing wheel nuts. The long arm of the telescopic handle provides an increased transmission of applied force, making it easy to loosen wheel nuts. The w...
The chisel holder / locking cap is a wear part on the Atlas Copco RRC13 and Spytze MD16 jointing hammer. Because such parts are widely used and can be a significant cost item, we offer them to you in top quality at a reasonable price.
,
We can offer special prices for 1, 5 and 10 pieces of these parts.
,
Ask for the best price and within 24 hours you will have a response or call for a direct price.
,
Bor9be30ej
The buffer is also economically available.
,
Look here for more information.
NEW PRESS BRAKE! MSE HILALSAN CAP-3175 MSE machines have become a renowned name in the field of service and retrofit of press brakes and shears. For some time now, MSE has been offering used press brakes and shears. These machines are often upgraded with a new Delem control and PLC to modern standards, guaranteeing years of trouble-free operation. Recently we started offering new press brakes, shears and profile shears. Because of our years of experience with sheet metal working machines and the...
For further information please contact the seller.
Otnih
Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing,
-Rexroth: R15104D977/R15104D973
-Shaft: Ø 38 mm
-Thread length: 1150 mm
3wbyr0gp
-Number: 2x spindles available
-Price: complete
-Dimensions: 1710/330/H250 mm
-Weight: 54 kg
Protection cap 50 x 50 mm (AANH-00516). Square 5 cm x 5 cm, 50 mm x 50 mm Colour: Black Material Plastic Plug / Protection cap square. Plug caps, also called slat caps, for square tube or sleeve are available for tube sizes. These caps are very suitable to finish tube constructions, chassis and trailers, but also as leg cap or foot for tables, chairs and garden furniture. Dimensions are 50 x 50 mm or 5 x 5 cm. Material: Plastic.
Bqlnaunt2r
