Used Extruders & extrusion lines for sale (232)

Condition: used, Functionality: fully functional, machine/vehicle number: 460, Year of construction: 1997, EXTRUDER ME 45/3x25D - used machine, function tested - DC drive 14 kW - Screw speed 8-85 min-1 - Cylinder, one-piece, with water-cooled feed zone - 4 cylinder heating/cooling zones with 4 air blowers - 1 flange heating zone, incl. heater band - 3 mould heating zones, without heating elements - Three-point temperature controller type KS 40 with digital display, self-optimisation and error message - die connection in special design with external thread M 85 x 2, designed for melt pressure and temperature temperature measurement Mass pressure and temperature measurement - complete with 2 separate measuring probes - digital display units - incl. 2 blanking plugs Hopper - capacity approx. 60 litres - swivelling mechanism 1 Screw ø 45 mm x 25 D - 3-zone screw for processing Polyamide as per drawing 22501850 - Output capacity approx. 8-35 kg/h (depending on mould design) - Nitrided, polished and hollow drilled - Screw tip suitable for mould connection Fgob Hjtx Av Rsa Ngtsb

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel Feb Ha Njuak Nljgtegb - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Year of construction: 2022, Condition: new, Functionality: fully functional, machine/vehicle number: ZE60R, Sell spare parts for ZE60R twin-screw extruder. IMMEDIATELY AVAILABLE!!! The following screw elements are available immediately: 2 pcs. ERZ-45/1/2 4 pcs. ERZ-60/0,5/2R 2 pcs. ERZ-60/1/2 2 pcs. ERZ-75/1/2 Fgeb Ha Ngoqwdtdetob 4 pcs. ERZ-KB75/5/60L 2 pcs. ERZ-KB75/5/90 Material version: Z9 Price on request!

Year of construction: 1994, Condition: good (used), Max reel diameter 1600mm Die gap 1.25-2.26 Fobop Du A Tj Ha Ngtogb Die diameter 350mm Thickness 25-130 micron Speed 250kg/hr

Condition: used, Used powder paint line. The line cosist of: - container mixer Mixaco, typ CM300, with 3 x ss tank 240Ltr new.: 1992 - extruder Buss PLK46P, 18 kW Fgsb Hjvxrulja Ngteb - Cooling conveyer Buss, typ PA 46, 400mm wide x approx.420mm long - mill Hosokawa Mikropul, typ ACM10, new: 1992 - dosing device Gericke, typ G1 D Y6, new: 1994 - feeding device Hosokawa Mikropul, typ RAL4, new: 1994 - pressure filter , Hosokawa Mikropul/Filba , typ: 18 HR 6 P8R 11, new: 1994 - stainles steel cyclone diam.: 300 mm - rotary screen AZO, typ E 240, new 1993 - pocket filter, made Tatra filtr

Year of construction: 2014, Condition: good (used), Functionality: fully functional, machine/vehicle number: MP-1406-90, The extruder is a single-screw extruder with an output of max. 120 kg/h. The screw diameter is 90mm. PVC pipes up to 150mm were produced on the system. The system is fully functional. It was replaced by a new one with a larger output. Fgobjufxxrs Ha Ngtob The tools and calibrators are not included.

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, - for extruding rigid, flexible, corrugated profiles - KIWEX China product - 4 heating zones - air cooling - 7.5 kw motor - extruder with adjustable speed - water cooling, 1.25 kw pump Feb Ha Njv Rgtgegtogb - drawing belt with 2 0.5 kw motors - with 2-station winding installation - equipped with linear counter - various technological attachments (creepers for corrugated tubes, various screws)

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG BA KEP 90-26.3-S 1x transmission gear BARMAG 9E4-11-103/Z 1x drive motor AEG G 16.04 with external ventilation 460V, 112A, 46.7KW, 3150rpm, Err.330V, 2.21A 1x dosing unit SCHOLZ incl. Feed hopper 1x control unit System features: - Single-screw extruder, year of manufacture approx. 1970 Fgeb Ha Ngjuakzzjteb - Throughput 200kg/h - Conversion to new screw geometry in 2016 - Screw diameter 90mm - Screw length 2769.5mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Material screw 1.8550, nitrided - Technical documents The system is available 4x, Subject to prior sale Please send inquiries only by email Note: The machine is still installed and can be inspected on site. The buyer must remove it himself and organize shipping. This is not part of the offer price.

Year of construction: 1981, Condition: refurbished (used), Functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Fgsbju Ttf Ne Ha Ngteb Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Year of construction: 2007, Condition: good (used), TECHNICAL DATA Extruder "A" 135/33 L/D • Output max. LLDPE 950 kg/h Extruder "B" 60/28 L/D • Output max. VLDPE 200 kg/h Extruder "C" 60/28 L/D • Output max. LLDPE 200 kg/h Raw materials: LLDPE MFI 2 - 5 g/10min VLDPE MFI 2 - 5 g/10min Coex Structure 3 layer Film thickness range for stretch wrap film 11 - 45 μm Final film width 4 x 500 mm // 8 x 250 mm // 2 x 750mm + 1 x 500mm // 2 x 750 mm + 2 x 250mm • Flat die lip width 2.550 mm Fjb Haeqk T Dis Ngtegb • Roller width 2.700 mm • Chill roll C1 Ø 1.000 mm • Chill roll C2 Ø 400 mm • Mechanical speed max. 600 m/min • Installed electrical power for one line approx. 1.022 kW • Utilisation factor approx. 40 - 50 % of total value • Necessary cooling capacity approx. 492 kW approx. 422.882 kcal/h • Compressed air consumption approx. 60 Nm³/h

Condition: used, Used powder paint line. The line consist of: Fjb Ha Njvxrppjgtogb - container mixer Mixaco, typ CM300, with 4 x ss tank 240Ltr - extruder Coperion, ZSK 34, new.: 2006 - Cooling Conveyer BBA Cooler, typ CC-80/30, 800mm wide x approx.3000mm long - mill Hosokawa Mikropul, typ ACM10, new: 1994 - dosing device Gericke, typ G1 D Y6, new: 1994 - feeding device Hosokawa Mikropul, typ RAL4, new: 1994 - pressure filter , Hosokawa Mikropul/Filba , typ: 18 HR 6 P8R 11, new: 1994 - stainles steel cyclone diam.: 300 mm - rotary screen AZO, typ E 240 - pocket filter Tatra Filter

Year of construction: 2022, operating hours: 2,000 h, Condition: excellent (used), Functionality: fully functional, Capacity 1100-1200 kg/h (LDPE) Feeding conveyor with metal detector Upgrad extruder vacuum pump Fgjb Hsu Tdhbea Ngtjb Laser filter LF_2_364 Hot die face pelletising system Big bag fill unit with transport system

Year of construction: 2011, Condition: excellent (used), Functionality: fully functional, - 10 heating-cooling zones -hydraulic screen changer 2.2 kw - without stopping the machine - 2 screw feeders 65 - magnetic grid separator - vacuum degassing Fgob Ha Nev N N R Sjgtob - 90 kw extruder motor with adjustable speed - 2.2 kw material feeding motor - 2.2 kw blower - 2 kw vibrator motor - 4 kw granulator motor -productivity 100 - 130 kg / hour - automatic feeding

Condition: used, Year of construction: 2003, operating hours: 35,900 h, Functionality: fully functional, screw diameter: 58 mm, heating capacity: 25 kW (33.99 HP), power: 125 kW (169.95 HP), Selling due to a closure our WPC/PVC profile extrusion line consisting of: 1) Main extruder: manufactured by Cincinnati Austria 2003, model Fiberex T58, twin-screw, conical, counter-rotating, screw diam 58mm, motor 39 kW (DC), screws and barrel TC coated. The extruder is designed for WPC profile production but could be re-set for other product and/or type of plastic. Low running hrs. Fob Hev Ddrtja Ngtjgb 2) Co-extruder: manufactured by Liansu in 2011, model LSE-38, twin-screw, conical, counter-rotating, screw diam 38mm, motor 11 kW (AC), screws and barrel TC coated, horizontal dosing feeder, double degassing filter, has own control cabinet, able to run synchronic with main extruder or stand-alone. 3) Calibration table: manufactured by Weber in 2010, calibration length 4m, SS water bath, adjustments up/dwn, left/right, body dimensions 4000×1100×1200mm 4) Haul-off unit: manufactured by Technoplast Austria, double caterpillar track driven by 2x 2.2 kW AC motors, hauling size 240mm (W) x 2700mm (L), speed range 0～6.75m/min adjusted DC drive. Machine combined with cutting saw (diam 400mm) unit, cutting height 100mm, precision cutting length adjustment by Autonics controller. Dpls2V 5) Stacker: pneumatic discharge, length 6m. The line is in good working condition, could be demonstrated on-site by appointment. Optional equipment: vertical Kramer-feeder for pulp materials (made by Cincinnati), pneumatic material auger Simatic, optional replacing the co-extruder made by battenfeld-Cincinnati K38, etc.etc.

Year of construction: 2004, Condition: used, Functionality: fully functional, machine/vehicle number: 20759, 5 coupled mixing silos, incl. control system Fob Hsun Sw Uja Ngtegb TECHNICAL DATA: Dimensions: each silo 2000x2000x5800 The silos are taken directly from current production and are sold as seen. Technical documents (machine expose) will be sent on request. Inspection and collection in 9125 Kühnsdorf / Austria. VB: € 35.000,--

Year of construction: 2006, Condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 Fgob Ha Njpaiaiogteb - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Year of construction: 2014, Condition: used, Used powder coating line. Shutdown in 2024. - container mixer Mixaco, typ CM1000-MT, with 4 x ss tank 800Ltr new.: 2014 - extruder Coperion, ZSK 43 MV, new.: 2014 - SBS Cooling Conveyer 800mm wide x 5000mm long - mill Hosokawa Alpine, typ ACM40 EC CL, new: 2014 - dosing device Gericke, typ GL D 7, new: 2014 - feeding device Hosokawa, new: 2014 - pressure filter Hosokawa Alpine, new: 2014 Fob Ha Njvxrm Uegtjgb - stainles steel cyclone diam.: 500 mm - 2x rotary screen AZO, typ E 240 - pocket filter, with 45 kW el. motor - cooling unit Climaveneta typ NX/K 0914P - cooling unit Climaveneta typ NX/K 0552P

Year of construction: 2019, Condition: good (used), The granulation line consists of a belt conveyor, an agglomerator technologically integrated with an extruder; a two-stage, twin-screw extruder with L/D ratios of 28:1 and L/D 12/1 is equipped with a degassing system, a hydraulic screen changer and a water cutting head, a centrifuge, a vibrating feeder with a screen, pneumatic conveyors, a buffer tank, and automatic control with a control cabinet. The line is a reliable recycling equipment that is suitable for plastic films, bags, scraps (≤ 0.5 mm) and other soft PE/PP waste. It has a compact structure, an ergonomic layout of individual devices, and is characterized by smooth operation, convenient maintenance, low noise and energy consumption. The control panel is only for the line, and all the electrical parts for all the equipment in the line are equipped with international high-quality components, including Siemens low-voltage electrical appliances, Fuji inverter, Omron temperature controller, etc., which is a guarantee for the reliable operation of the production line. Feb Hasvlxufo Ngtjgb In addition, the control panel is also equipped with a door protection device. When the door is opened, the power will be cut off and there will be no electricity in the panel. It will make the checking and maintenance much safer, without the risk of electric shock. After closing the door, the power will be on. Feedstock Conditions: Washable PE/PP films or bags The thickness should be ≤ 0.5mm The raw materials should not contain oil, metals and other things. Environmental Conditions of the Line: No freezing point or condensation points; Temperature 0 ~ 40 ℃. Working Conditions: Electricity: 3 phase 380V, 50Hz; Installed Power: ~ 480kW; Required water supply: ~ 10 m3 / h. Year: 2019 Model: PRP-500

Condition: ready for operation (used), Functionality: fully functional, color: blue, Year of construction: 1994, operating hours: 100,000 h, machine/vehicle number: 94 0031 1000, Automatic extruder for fibre production with granulate feeding possibility. Equipped with 90 mm diameter extruder with 30 L/D ratio screw, belt driven filter changer (for continuous operation) and 1000 mm width head unit (wide die). Equipped with a cooling roller and a cutting unit for slitting film strips of the desired size to ensure the solidification of the produced film. Heat-insertion stretching chamber between slow and fast running rollers for stretching the foil strips in 15 turns. The surface of the stretched foil strips is provided by a needle fibrillation unit. Fob Ha Ngsviw D Hjtsgb The finished fibrillated film filaments are wound on a 20-unit automatic filament winding stand.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,590 h, Functionality: fully functional, Equipment: documentation/manual, Corrugator-Shuttle system , ITIB MACHINERY INTERNATIONAL s.r.l. for producing Double wall corrugate pipe, HDPE and PP , with outside corrugated and inside smooth layer Description of the equipment • Model: Corrugator F700 - shuttle system Molds: 7 dimension of mold blocks . Each dimension include 9 pairs of molds. Die head: 7 die heads - Each dimension has its own die head Cooling mandrels : 7 pcs - Each dimension has one cooling mandrel for SN 8 Fgjb Ha Nsv E Nwdsgteb

Year of construction: 2023, Condition: refurbished (used), Functionality: fully functional, NGR S-Gran 65 Brand new NGR extruder S-Gran 65, incl. filling station TECHNICAL DATA: Feb Hsm Ux Izea Ngtsgb Extruder screw diameter: 65 mm cutting width: 500 mm max. kg/h: 200 - tested actual output: 150 - 160 kg/h max. lbs/h: 400 Output values for LDPE according to NGR factory standard, depending on material and condition. The machine was built in 2016; was completely refurbished by NGR in 2023 and all production-relevant parts were replaced! The extruder has been taken directly from ongoing production and is being sold as seen. Technical documents (machine expose) will be sent on request. Inspection and collection in 9125 Kühnsdorf / Austria.

Year of construction: 2011, Condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Fgeb Ha Nspah U Tjgtob Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, overall weight: 44,500 kg, total length: 360,000 mm, Production line, machines, for the production of polypropylene woven bags, which consists of 6 types of machines *extruder with a mixer for raw materials, and with a machine for winding polypropylene threads 1 piece *circular knitting machines for weaving polypropylene canvas 6 pieces * automatic machine for cutting and sewing bags 1 piece *manual machine for sewing bags 1 piece * bag packing press 1 piece *metal spools for winding polypropylene threads fi38- 230mm 20000 pieces * new spare parts worth 3500-4000 euros * recycling granulator 1 piece The customer can get all the necessary instructions for starting production from us. Feb Horwx Efea Ngtegb The machine is still under the warranty period of 6 months from the manufacturer. The customer has all the support of the manufacturer for further maintenance and service of the machines. An interested customer can request all additional information about the production line and each machine individually. The production line is sold exclusively as a set, we will not sell individual machines from the production line.

Condition: good (used), Year of construction: 2003, Functionality: fully functional, The Kramer feeder for dosing bulk materials into the extruder. Motor driven by the FC, can be controlled from main extruder by CAN-open. Adjustable supporting leg. Fgjbsvkcwnj Ha Ngteb

Condition: ready for operation (used), Year of construction: 1997, operating hours: 100,000 h, Functionality: fully functional, machine/vehicle number: 906100010011301, input frequency: 50 Hz, input current: 400 A, working width: 1,000 mm, Automatic extruder for the production of fibres, with the possibility of mixing in granulate raw materials and additives (sizing, stabilising, etc.). Equipped with extruder screw with 100 mm diameter, 32 L/D barrier zone, hydraulically operated filter changer (for continuous operation) and 1000 mm width head unit (wide die). Equipped with a cooling roller and a cutting unit for slitting film strips of the desired size to ensure the solidification of the produced film. Heat-insertion stretching chamber between slow and fast running rollers for stretching the foil strips in 15 rounds. The surface of the stretched foil strips is provided by a needle fibrillation unit. The finished fibrillated film filaments are wound on a 16-unit automatic filament winding stand. Feb Ha Nsu Rnv Tsgtogb