Used engraving machines for sale (129)

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Cgodpfjdux Duex Acvsr Here we offer a Lascon laser system with Lascon Controller LPC03. Laserline diode laser The diode laser 'LDM 500-60 ' has a wavelength of of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 wavelength of 935 nanometers +-10% Laser power: 550 W Mains voltage 100-264V +- 10% Max.power input 1,7 kw Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 has the power of a complete PC in a very small space. Instead of a hard disk a removable flash disk was installed. Due to the omission of the hard disk and the extremely low heat development, the LPC03 is therefore ideally suited for tasks in the field of for tasks in the field of measurement and control in industrial environments. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: exchangeable flash disk Connectors: USB front; Ethernet,RS232, VGA, keypad, mouse,USB rear. Housing: 212mm X 80mm X 250mm ( height X width X depth ) Protection class:Front: IP40 Environment: 15°C - 40°C Ty

Condition: ready for operation (used), Grid plate X/Y: 342mm/424mm, viewing window X/Y: 280mm/200mm, max. component dimensions X/Y/Z: 342mm/424mm/275mm, Z-axis: 235mm, machine dimensions X/Y/Z: approx. 600mm/550mm/810mm, weight: approx. 90kg. Controller & marking head: LP-RV200P, laser type: FAYb, laser class: 4, wavelength: 1.06µm, average output power: 20W, marking dimensions X/Y: 90mm/90mm, working distance: 190mm, writing speed: 12m/s, conveyor belt speed: 240m/min. Integrated pilot laser included. Documentation available. On-site inspection is possible. The system is dismantled and packed ready for delivery. Csdpev Rftfofx Acvsgr

Condition: ready for operation (used), Year of construction: 2020, A Panasonic laser marking machine (laser marking station) with a defective laser head is available. Travel X/Y/Z: 500mm/430mm/350mm, marking range X/Y/Z: 720mm/430mm/350mm, machine dimensions X/Y: approx. 800mm/1900mm. Documentation available. On-site inspection is possible. Csdsv Rfqqjpfx Acvegr

Condition: new, Year of construction: 2025, functionality: fully functional, shaft length: 10,700 mm, laser power: 30 W, Laser Engraving Machine with 30 Watt Laser Power - 30 Watt CO2 Metal Tube Laser Source Demonstration unit, with minimal operating hours - includes Windows 10 Pro 64-bit PC system - includes 22" monitor - fully installed and calibrated - Engraving software in German Cgjdpoirmgmsfx Acvsr - Very easy to operate - Switch on and start immediately - 30 Watt CO2 laser source for high-contrast and fast marking with extremely high resolution - Capable of deep engraving - Wobble function - Suitable for engraving on, e. g., wood, plastic, anodized surfaces, etc. - Heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 500 x 600 x 600 mm (W x D x H) - Clamping table with mounting threads in 50 mm grid - LED work area lighting - 50 mm connection for fume extraction - Engraving area approx. 180 x 180 mm - Expandable up to approx. 300 x 300 mm - Includes foot switch to start the engraving process Please also check our attractive leasing/financing offers. Sale exclusively to commercial customers. Delivery / consulting / sales only within Germany / Austria / Switzerland Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, laser power: 20 W, UV Laser Engraving Machine with 20 Watt Laser Power - Laser source with 355nm wavelength / 20 Watts Demonstration machine, with minimal operating hours (approx. 15 hours) - incl. Windows 64-bit PC system - incl. 22" monitor - everything fully installed and calibrated - Engraving software in German - 3D software (MM3D) - very easy to operate - switch on and start working - UV laser source with 20 Watts for high-contrast and fast marking with extremely high resolution - suitable for engraving almost all metals (stainless steel, brass, aluminium, etc.) - suitable for engraving almost all plastics (including PVC, silicone, etc.) - suitable for engraving real glass (including crystal glass) - capable of cutting real glass - heavy-duty industrial quality Csdjflrnaepfx Acvegr - complete system / ready for immediate use - working area approx. 500 x 600 x 600 mm (W x D x H) - clamping surface with threaded inserts on a 50 mm grid - LED workspace lighting - 50 mm duct connection for fume extraction - Engraving area approx. 150x150 / 200x200 / 300x300 mm (switchable) - 3D scanner for marking surfaces of any shape - incl. foot pedal to start the engraving process Sale to businesses only. Delivery / consulting / sales only within Germany / Austria / Switzerland. Please also ask about our attractive leasing/financing options. Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Condition: new, Year of construction: 2025, shaft length: 1,070 mm, laser power: 60 W, type of cooling: air, Laser Engraving Machine with 60 Watt Laser Power New demonstration unit - 60 Watt MOPA laser (enables color laser engraving on stainless steel) - Incl. 4th axis (rotary unit) - Incl. Windows 10 Pro 64-bit PC system - Incl. 22" monitor - All software and hardware pre-installed and calibrated - Engraving software in German Cedpfx Acefkgq Nsvsgr - Very user-friendly operation - Plug and play – ready to use immediately - 60 Watt fiber laser source for high-contrast, fast marking with extremely high resolution (see photos) - Deep engraving up to 4mm possible (even in hardened steel) - Wobble function, e.g., for cleaning metal components - Suitable for engraving on many metals (stainless steel, brass, aluminium, etc.) and a wide range of plastics - Heavy-duty industrial quality - Complete system / immediately operational - Working area approx. 500 x 600 x 600mm (WxDxH) - Clamping surface with mounting threads in 50mm grid - LED work area lighting - 50mm port connection for fume extraction - Engraving area approx. 180 x 180mm (expandable up to approx. 300 x 300mm) - Incl. foot switch for starting the engraving process Please also ask about our attractive leasing/financing offers. Sale is exclusively to commercial customers. Delivery / advice / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, warranty duration: 12 months, laser wavelength: 1,070 nm, Equipment: cabin, Laser Engraving Machine with 30 Watt Laser Power - Demonstration unit (approx. 10 hours of use) - Worth a look - Incl. Windows PC 64bit (incl. monitor/keyboard/mouse) - Fully installed and calibrated - Engraving software in German - Very easy to operate - Switch on and start immediately - Fiber laser source with 30 watts for high-contrast and fast markings with extremely high resolution (see photos) - Wobble function, e.g. for cleaning metal components - Deep engraving up to 3mm possible - Suitable for engraving on many metals (stainless steel, brass, aluminum, etc.) and a wide range of plastics - Heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 390 x 270 x 350mm (L x W x H) - Clamping table with mounting threads in a 50mm grid - LED work area lighting - 50mm port for fume extraction - Engraving area up to 170 x 170mm - Motorized focus adjustment - Incl. foot switch to start the engraving process Cedpfjd Ha I Ssx Acvegr Please also take note of our attractive leasing/financing offers. Sale exclusively to commercial customers. Delivery / consulting / sales only within Germany / Austria / Switzerland Machine dimensions approx.: Width: 450mm Height: 800mm Depth: 750mm Weight: approx. 80kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,700 mm, input voltage: 230 V, laser power: 150 W, type of cooling: water, warranty duration: 12 months, Equipment: cabin, Laser cutting machine from our showroom with 150-watt laser power Delivery time: immediately available ----- Switch on and start working ----- ----- Machine with only approx. 10 operating hours ----- ----- Year of manufacture: 2025 ----- ----- Professional-grade machine ----- - incl. Windows 11 PC system / monitor / keyboard / mouse - Pre-installed cutting and engraving software in German - Fully integrated and ready for immediate use - Capable of extremely fine engraving as well as precise cutting of thick wood or acrylic (PMMA) - Machine was only used for demonstration purposes - Highly versatile cutting system - Cuts wood up to 20 mm thick - Cuts acrylic and various other plastics - Cuts fabrics, nonwoven materials, etc. - Cuts rubber sheets - Engravings on wood, concrete, stone, many plastics - Production of stamps - Heavy-duty industrial quality - Travel range: 1300 x 900 mm - Drives with hybrid servos - Linear guides on all axes - reci laser tube with 150 watts peak output - incl. honeycomb worktable (removable / extendable) Cedpfx Acofkgq Ajvegr - incl. knife blade table (removable / extendable) - Sheets up to approx. 20 mm thick can be fed through the machine - Continuous processing possible - incl. generously dimensioned laser chiller - incl. high-capacity extraction system - Very easy to operate - Machine control in German - Machine controller in German with large color display - Highly reliable data transfer via USB and network cable - No hassle with occupational safety authorities - All spare and wear parts are in stock Please also see our attractive leasing/financing offers. Sale exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 200 cm Height: 125 cm Depth: 150 cm Shipping weight: approx. 600 kg

Condition: used, Year of construction: 2022, input voltage: 230 V, type of input current: AC, total width: 1,085 mm, total height: 1,050 mm, total length: 1,550 mm, working range: 1,000 mm, input current: 16 A, input frequency: 50 Hz, We are offering this used Q400 Trotec laser and an Atmos Duo Plus 230 extraction unit, including laptop, year of manufacture 2022. Model: Trotec Q400 and Atmos Duo Plus 230 Extraction Unit Airflow: 2×320 m³/h Pressure: 8,500 Pa Cjdpfx Asygl Daecvjgr Input voltage: 230 VAC Current: 16.0 A Power: 2.4 kW Frequency: 50/60 Hz Protection class: IP40 Trotec No.: 42335 Wiring diagram: AD 1.0 Date of manufacture: 10/2022 Serial number: 01422-19284 Laser dimensions: Length 155 cm × Width 108.5 cm × Height 105 cm Extraction unit dimensions: Length 54.5 cm × Width approx. 65 cm × Height 105 cm Engraving area: 100 × 60 cm Collection only. Viewing by appointment. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1724, laser power: 25 W, type of cooling: air, total width: 850 mm, total height: 1,950 mm, total length: 1,000 mm, working range: 1,250 mm, overall weight: 210 kg, warranty duration: 6 months, door opening width: 700 mm, table length: 700 mm, table width: 400 mm, Equipment: cabin, Used laser marking system for precise marking of metals, plastics, and hybrid components. Demonstration machine, 6-month warranty, Made in Germany. Technical data – Laser - Laser source: Keyence - Marking field: 125 × 125 mm - Focal distance: 189 mm (±21 mm) - Features: Autofocus & distance measurement (MD-AD-ZT), 3D marking add-in (MD-AD-3D) Cgjdeyf Ap Djpfx Acvsr Workstation – SK LASER KOLLTRONIC - Laser class 1, enclosed workstation - Combined sitting/standing work position - Aluminum profile housing, silver cladding - Front door with laser safety glass, bright work lighting - Rear service door (bolted, for oversized workpieces) - Motorized Z-axis for focus adjustment - DN50 extraction port for fume extraction - Dimensions: Standard for SK LASER KOLLTRONIC Workstation 1 Control & Software - Industrial PC - 19" TFT color monitor, keyboard & mouse - Control via Keyence software, including 3D and autofocus functions Condition & Delivery - Demonstration machine, used - 6-month warranty - Operating temperature: 0–40 °C - Delivery optional

Condition: good (used), Year of construction: 2022, operating hours: 1,700 h, functionality: fully functional, laser power: 45 W, - Manufacturer: Trotec - Model: Speedy100c-8063 - Year of manufacture: August 2022 - Serial number: S1-7145 - 45 Watt CO2 - 230 V - 50 Hz - with autofocus - with air assist - with 2.0" lens - with cutting table 12.7 mm - with Performance Upgrade - with X-axis with 2 carriages - Scales in mm including: - Extraction unit - Manufacturer: Aigner/Trotec - Model: 8401 Atmos Cube Speedy 230 V - Serial number: 01732-18928 Cgsdpfx Aeygl Nvecvor - Extraction connection cable Additionally available: Large lot of engraved parts made of wood, plastic, etc. Various shapes/motifs Shipping possible on request. Sale to commercial customers only.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1746, shaft length: 10,564 mm, laser power: 100 W, type of cooling: air, working range: 1,750 mm, overall weight: 205 kg, table height: 1,760 mm, table length: 12,000 mm, table width: 9,200 mm, Equipment: cabin, Used fiber laser system for laser marking, engraving, marking, and microstructuring on metals and plastics. Ex-display machine, laser class 1, CE-compliant, Made in Germany. Cgsdpfx Aceyfvhgjver Laser & Beam Source - IPG Ytterbium fiber laser - Power: 100 W - Wavelength: 10564 nm - Pulse energy: 0.2–1.0 mJ - Cooling: Air-cooled, no external cooling required - Power supply: 230 V / 50 Hz - Scanner: X-Y galvanometer with mirror mount for 1064 nm Note: Manufacturer’s lab values; actual values may vary depending on the application. Scanner & Control - F-Theta lens: f = 254 mm, anti-reflection protective glass - Marking field: 175 × 175 mm - Max. scan speed: 4 m/s Industrial PC with Windows 11 Pro, SSD storage - Controller cards for laser & scanner - Digital & analog interfaces: RS232, Ethernet, USB - Custom adaptations optional - 19" TFT color monitor, keyboard & mouse - SK CONTROL software - Industrial software for texts, logos, QR codes, variable data - Intuitive user interface, logo/photo import via mouse click - Job management and parameter library for reproducible quality - Pilot laser displays laser position as red rectangle Workstation 1 – SK LASER - Enclosed laser class 1 workstation - Combined sitting/standing workstation - Aluminum profile housing, front door with laser safety glass, bright work lighting - Dimensions: H 1760 × W 920 × D 1200 mm - Stainless steel worktop with 25-mm hole grid, 710 × 400 mm - Motorized Z-axis, travel 500 mm (gross) - Rear door for oversized workpieces (when open: laser class 4) - Extraction nozzle DN50 for fume extraction - Redundant safety equipment: emergency stop, interlock, safety relay performance level 4 - Operating temperature: 15–35°C - Connection load: 230 V / 50 Hz Condition & Delivery - Ex-display, tested machine - Optionally: Delivery including commissioning within Germany

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,600 mm, laser power: 60 W, type of cooling: air, total width: 800 mm, total height: 1,800 mm, total length: 1,700 mm, working range: 1,200 mm, warranty duration: 6 months, height adjustment type: electric, table height: 7,000 mm, table length: 4,000 mm, Equipment: cabin, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Specifications - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air cooling Cedeyfucvopfx Acvogr - Power supply: 230 V / 50 Hz - Scanner & optics - X-Y galvo scanner with mirror mount - F-theta lens: F = 200 mm, anti-reflective protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Fully enclosed workstation - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Control & Software - Industrial PC Marking software: - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap - Intuitive, user-friendly interface Scope of Delivery & Safety - Complete machine, workstation - 6-month warranty - CE certified, TÜV-tested Condition & Delivery - Refurbished, technically tested Offer valid ex works plus shipping, while stocks last

Condition: used, Year of construction: 2011, A well-preserved EMAG laser welding machine with EMAG ultrasonic testing system including Laser Rofin type: DC 060 built in 2009 Without exhaust unit The machine used to weld gears with coupling rings. Diameter 60-80 mm. Weld depth 4-6 mm. Codpoixxqkjfx Acvsgr *

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, TECHNICAL DETAILS Type: TSM 15-10-UG Year of manufacture: 2012 Control type: NR4000.2.1 IPC Cgedpfxjx Iuhfj Acver MACHINE DETAILS Product designation: CNC marking machine EQUIPMENT Operating manual available

Condition: used, Year of construction: 1993, Technical details: height of printing: - height of printing: - connection electric: 100-240 V pneumatically operated: min./max.: 4,8/6,9 bar The printer is a lower case inkjet printer for contactless mark products. Application: for commercial marking and labeling purposes. The device can print on any surface, any structure, any profile and on any form. (according to the manufacturer) Equipped with two control units. other features: - dimension height: 3.3 - 8.6mm and 1/8 "- 1/3"; Points of reference: 62 digits; - operation is via control unit - equipment with control unit 170i and accessories Control unit 178i dimensions: Cgedju Nu Tpopfx Acvsr - machine: L: 600 x W: 650 x H: 1800mm - control units: L: 203 x W: 508 x H: 610mm Sale as is. Without test run! i.D. *

Condition: used, Year of construction: 1996, Technical details: x-travel: 100 mm y-travel: 100 mm z-travel: 300 mm Table dimensions: 350 x 300 mm air pressure: 6 bar voltage: 220 / 240 V weight of the machine approx.: 40 kg dimensions: L:475 x B:300 x H:700 mm Application for engraving and/or marking work on parts on both straight and curved surfaces. with manual height adjustment with handwheel, digital controls with control unit/device Technifor UC200; size 420x290x100mm (external control command) Foot pedal XPE-M Test plate/table size 350x300mm, cast steel, (slight scratches) pneumatic connections Note: the processing head (engraving unit) is not included in the scope of delivery. Cgsdpju Nu Ugsfx Acver *

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, laser type: fiber laser, Model 2022 for Industry 4.0! Laser marking machine for: = ᐳ Mark = ᐳ tempering of metals = ᐳ labeling of many materials = ᐳ deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (var.pulse width on request) Simple operation and handling! Iayabahok Our Exclusive XL laser marking system is characterized by: • Professional fiber laser source JPT MOPAfix 20 or 30W power • 1064nm, 20-400 kHz (for perfect starting engravings) • "New Generation ECO" scanner unit • 19 "PC control, no external card! • very large viewing window with certified laser safety glass • Scan area approx. 150 x 150 mm • electrical height adjustment • Full housing with 4 roles • Mark "weightless" lift gate for safe. EZCAD III software: • Barcode and QR code support • Serial number function • Batch scanning from an Excel file • Laser parameter finder per matrix over 2 parameters • TCP IP connectivity for external components • Industry 4.0 can be processed at any time using the TCP / IP protocol. • Inputs and outputs for direct communication • New look and feel and fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis machining • Performance increase of up to 50% through 64bit • Improved stability through integrated control card • Optional up to 4 axis controls (integrated) • Optional DEEP engraving with Z axis • More powerful algorithms for fast hatching. • Completely redesigned galvo generation • 2-fold laser pointer for checking the focus position. • LED lighting of the marking area • Connection possibility for external suction • Start button and EMERGENCY STOP on the housing • USB and network connection for data access • Operating instructions and operating software in German • protective housing acc. Laser class 1 • incl. 4 hours of training in our training center (max. 2 people) Do you need individuality? With pleasure. Choose from our numerous accessories: = ᐳ Camera systems for object detection = ᐳ Fiber laser source in almost all variations = ᐳ motorized and automatic height adjustment = ᐳ Scanlab equipment = ᐳ Automation for assembly = ᐳ conveyor belts for inlet and outlet = ᐳ 3D marking and GRAVIER function. = ᐳ automatic focus adjustment = ᐳ turntable = ᐳ motorized sledge = ᐳ Interlock system for labeling WITHOUT protective housing, but only with PPE (personal protective equipment) for bulky parts Coded S I Smspfx Acvegr Our engraving lasers of course allow individual wishes in terms of design and size! = ᐳ Made in Schweinfurt! Images can contain options! Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser engraving, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, laser marking system, marking laser, marking laser Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser engraving, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, laser marking system, marking laser, marking laser, marking laser, marking laser

Year of construction: 2023, operating hours: 2 h, condition: new, Model 2023 - Professional fiber laser source XRAYmark with 20 Watt power and 400 kHz - Scanner unit "PreciseView" with camera for live image - T-slot plate or threaded hole plate for easy mounting of the marking unit (200 x 200 mm) - Viewing window with certified laser safety glass - scanning area approx. 100 x 100 mm - manual height adjustment - Housing with man. Lift door for easy and safe marking. EZCAD III software - Barcode and QR-Code support - Serial number function - Batch scanning from Excel file - Laser parameter finder by matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP Connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like third party camera position detection etc. - Industry 4.0 via the TCP/IP protocol can be processed at any time the state. - Inputs and outputs for direct interaction with the outside world - New look and feel. A fresh design which allows an even clearer and more pleasant operation. - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins. - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned Galvo Generation (Eco, Hi-Speed & 3D) with 2x laser pointer to visually check the focus position. Cuhn227e - LED illumination of the marking area - Connection possibility for external suction - Start button and emergency stop on the housing - Software for PC for Windows operating system - USB cable for connection to the computer - Instruction manual and operating software in German As option offer among other things =ᐳ IPG laser source / fiber laser source in various powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for stocking, conveyor belts and much more! =ᐳ 3D Marking and GRAVING Function. =ᐳ automatic focus adjustment =ᐳ rotating unit =ᐳ motorized carriage =ᐳ Interlock system for marking WITHOUT protective housing, but only with PPE (personal protective equipment) for bulky parts. Codpfsd Ibu Njx Acvsgr incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our factory in Schweinfurt! Therefore, individual requests are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser marking system, laser marking system, laser marking system, marking laser, marking laser, marking laser Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser engraving, laser engraving machine, #Laser marking machine for marking many materials. Extremely clean and high contrast #engravings are achieved with the fiber laser source. This #laser engraving machine is economical and easy to use.

Condition: new, Year of construction: 2025, The laser processing center skyCUBE M - the new standard in laser material processing! PFEIFER laser processing center skyCube M Laser machine with 200W CO2 laser available immediately Mclass = machining area X 1250 x Y 650 x Z 300 mm skyCUBE M laser processing center - the new Mclass multifunctional laser engraving machine and laser cutting machine - laser processing simple - high precision - laser engraving, cutting with high speed and quality. Our new and best multifunctional talent not only impresses the most experienced user with its newly thought-out design. This CO2 laser / fiber laser shows its outstanding capabilities as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser in all industrial applications. With an optional laser power of up to 1000W (1kW), the CO2 laser device / fiber laser system can also be used extremely flexibly in your production. skyCUBE laser devices meet all the requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. Depending on the selected and installed laser power, this CO2 laser / fiber laser is ideally suited for cutting and engraving many materials, such as: various metals, acrylic glass, solid wood, etc. Wood materials, wood composite materials, paper, cardboard, various plastics and Foams, textiles, and much more. The excellent execution of the laser machine 100% produced in Plauen guarantees the laser user from metal construction to the laser source a high level of work accuracy with consistently high quality. With a cutting speed of up to 8000 mm / s and an engraving speed of up to 4000 mm / s, high-quality laser technology produces clean and very sharp cutting edges and precise laser engravings. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. User-friendly and intuitive - the supplied skyCUBE PC software (ready for Windows®). A simple, practical user interface adapted to the Windows standard lets you work quickly and effectively. The software is characterized by high system stability, professional monitoring with appropriate machine operation and control as well as compatibility with common file formats. The data is output over levels - separately for each level, including the definition of the sequences and the type of processing. The parameters, such as laser power and processing speed, are automatically saved for each level and can thus be reproduced in a material database at any time. The laser projects are transferred to the skyCUBE M laser processing center with a computer connected via LAN / USB interface. From there these can be processed repeatedly without the PC having to be switched on. A modern touch control panel gives you access to all system information and functions. The skyCUBE M laser processing center at a glance: German industrial standard machine steel construction for the safe and vibration-free mounting of the laser components and axis systems, on rollable industrial leveling feet Cgjdpfxe Sfane Acvor 8 "touchscreen display simply see more, control more, communicate more with the skyCUBE M laser processing center Redundant safety system - class 1 laser Security: Shutter - ᐳ active mechanical beam path closure

Condition: new, Year of construction: 2025, 2D / 3D laser marker Cgedpfo Sd Ubjx Acver skyLaser Mark - 2D optional 3D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications

Condition: new, Year of construction: 2025, Laser Engraving Software PhotoGraV, current software version 3.1 Software for the preparation of photo data for laser engraving Cedpfxjcwgq Ne Acvogr With "PhotoGraV" you prepare your photos optimally for the laser output and optimize these with regard to the material to be engraved in advance, before you send the file to the laser. The software provides optimal results and this without time-consuming detours and special knowledge in image processing. Delivery range: PhotoGraV software, PDF manual, bonus seminar as PowerPoint presentation and more. applications Delivered as a download (on request on DVD, plus shipping costs). Upgrade from version 2.xx available for: 173, - Euro plus VAT

Condition: new, Year of construction: 2025, skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications The skylaser laser marking / engraving laser at a Glance: Processing Area : from 110 x 110 or 120x120 or 300x300 mm (depending F- Theta lenses / 3D option) Laser: IPG ( pulsed fiber laser , YTTERBIUM PULSED FIBER LASER ) SCANLAB galvanometer Nominal laser power : 20W / 30W / 50W New: Software controlled variably adjustable working width ( X axis max 200mm depending on the design . ) Included! New: Software controlled variably adjustable working height ( Z axis max 400mm depending on the design . ) Included! Optionally, other work areas - Automatic Materialzufuehrung etc. Air cooling as low power consumption Labeling speed: up to 5000 mm / s ( SCANLAB dyn AXIS ® galvanometer to reach 10 SCAN ® cube marking speeds of up to 640 characters per second. ) Redundant safety system Laser Class 1 according to the configuration or Laser class: 2 ( optional pilot through laser ) Cgsdpfx Acjbv Dayever piper -technology HQ mirrors and optics for perfect results , powered by Scanlab (R ) piper -technology industrial PC with the software pre-installed control New: including Laser Focus Finder New: including process air control Optional : laser positioning : an integrated diode laser for optimal positioning Including new F -theta lens 110 x 110 mm working area with protective glass! ( To extend the working range of optional (120, 180 , 350 mm) virtually maintenance-free Key Features Let yourself be inspired and please request our product video on your sample production ! Model Mark IPG laser engraving laser skylaser Work size 100 x 100 or 120 x 120 mm (F -theta 160mm ) other optional Laser power 20 / Option: 30/50 W ( air cooled) laser method YTTERBIUM PULSED FIBER LASER Engraving

Condition: new, Year of construction: 2025, You are looking for a real machine and not a toy, then you have come to the right place: Fiber laser laser engraver large format X1130 x Y665 x Z260mm Laser markers skyLaser Mark - 2D optional 3D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most delicate structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, force-free and without tool wear. The advantages in your application are the geometric flexibility and high processing accuracy. This type of processing can be used regardless of the hardness of the workpiece to be processed. The flexibility of the system increases with the mobile work table that can be adapted to your needs. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skyLaser Marks provide very precise and permanent markings (laser engravings) and are suitable for the special laser application area metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is effortlessly possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of stamps, engravings, lettering and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in next to no time, thanks to the optional observation camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and, thanks to the IPG laser technology, is almost maintenance-free, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or fiber laser laser engraver large format with integrated axes X1130 x Y665 x Z260mm Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB SCANcube galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working height (Z, axis max. 260mm depending on the structure) Optionally other work areas - automatic material feed, etc. Air cooling because of low energy consumption! Marking speed: up to 5000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCANcube ® achieve marking speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (with optional pilot laser) Pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: including process air control Cgjdjf U Spxopfx Acver New: including extraction control Optional: Positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm work area with protective glass! Fiber laser laser engraver large format X1130 x Y665 x Z260mm almost maintenance-free

Condition: new, Year of construction: 2025, The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in no time at all, thanks to the optional monitoring camera for process tracking and software-supported workpiece alignment. Cgedpodgfgcsfx Acvor Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications and in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-Theta lenses dependent / 3D option) Laser source: IPG (Pulsed Fiber Laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New, optional: software-controlled, variably adjustable working width (X, axis max. 450mm depending on the structure) included in the scope of delivery!