Used eccentric presses single column 55-99t for sale (117)

Condition: like new (used), functionality: fully functional, COFMO punching press, type KD 2128, capacity 63 tons, table 800x560 mm, ram 450x320 mm, stroke 10/100 mm, variable speed from 60 to 160 strokes per minute, ram adjustment 80 mm. Machine supplied with certificate of conformity and complete documentation. Can be inspected in good working condition. Ijdsxxrvfepfx Aaleap

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm Iaodpfx Asb Tdquealep table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t

Condition: used, Year of construction: 2018, Nominal pressing force: 4,000 kN Ram stroke, adjustable in increments: 30 ... 160 mm Ram adjustment: 180 mm Iajdpow Rbxzjfx Aaljp Throat depth: 515 mm Strokes per minute (idle): 45 / min Option: Infinitely variable stroke rate: 10 … 60 / min Die installation height at maximum stroke, bottom dead center, and ram fully raised: 660 mm Table clamping surface (W x D): 1,700 x 1,000 mm Table height above floor: 1,005 mm Ram clamping surface (W x D): 1,100 x 800 mm Pin bore in ram: 65 mm Main motor power: 45 kW Approximate machine height: 4,325 mm Machine weight: 33,000 kg Control system – Press safety control with redundant design and self-diagnosis, featuring plain text status and error display Infinitely variable stroke rate in the range of 10 ... 60 strokes/minute via ABB frequency inverter Control variant: TFT color touchscreen including electronic cam controller with die management and die protection, with color touchscreen visualization, SIEMENS PLC S7-300, die data management, counting systems, data transmission via Profibus Fully automatic stroke adjustment / ram adjustment Rigidly welded tie rods, clear distance between tie rods: 1,345 mm Swiveling main control console Non-contact safety guard – BWS brand LUMIFLEX, mounted at the front of the machine table or die area, installed on the tie rods

Condition: new, Year of construction: 2025, functionality: fully functional, table width: 850 mm, table length: 570 mm, total width: 1,265 mm, overall weight: 5,500 kg, pressing force: 60 t, C-frame eccentric press 60 t. NEW Press force: 60 t Rated capacity point: 4 mm Max. closed die height: 310 mm Stroke adjustment (semi-automatic): 20/100 mm Speed: 60 SPM Die fastening hole diameter: 50 mm Throat depth (centre of hole to back): 275 mm Ram stroke adjustment: 80 mm Ram dimensions: 580 x 350 mm Table dimensions: 850 x 570 mm Table hole diameter: 150 mm Table height above floor: 795 mm Weight approx. 5,000 kg Height: 2,430 mm Depth: 1,370 mm Width: 1,265 mm Iaodpfx Aextpltjalep Motor: 5.5 kW

Condition: good (used), Year of construction: 1987, functionality: fully functional, ram adjustment: 80 mm, total height: 24,100 mm, table width: 600 mm, table length: 800 mm, total width: 18,300 mm, total length: 20,400 mm, overall weight: 4,650 kg, pressing force: 75 t, To be viewed under power. Iaedjrr Sybopfx Aaljp

Condition: defective spare-parts repository (used), Year of construction: 1974, functionality: not functional, machine/vehicle number: 121645, table height: 910 mm, table width: 650 mm, stroke adjustment: 63 mm, overall weight: 4,000 kg, pressing force: 63 t, space requirement length: 1,200 mm, space requirement width: 1,900 mm, space requirement height: 2,800 mm, The eccentric press has a clutch defect and is currently non-operational. Without the column stand mounted in the pictures. Ijdpfx Asx D Tngoalsap

Condition: good (used), Year of construction: 1960, machine/vehicle number: P4461960, Offer 25471 Iajdpfxexxwc Re Aalop Technical Data: - Pressing force: 75 t - Throat depth approx.: 300 mm - Table size approx.: 800 x 600 mm - Height-adjustable table - Stroke adjustment approx.: 16 - 140 mm - Ram adjustment: 80 mm - Strokes per minute: 80 - Pneumatic connection - Drive: 400 V - Space required approx.: W 1800 x H 2450 x D 2000 mm - Weight approx.: 4000 kg

Condition: good (used), Year of construction: 1962, machine/vehicle number: 5601062, Offer 24287 Technical data: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable Iasdou Ilkiopfx Aalsp - Drop-through hole in table approx. 300 x 200 mm - Maximum installation height approx. 360 mm - Plunger surface approx. 340 x 160 mm - Pivot hole in plunger 40 mm - Plunger adjustment 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - Rotary wedge clutch - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 3500 kg

Year of construction: 1990, condition: used, pressure 80 t throat 250 mm stroke 5/95 mm table surface area 805 x 510 mm distance table/ram Hub unten - 400 mm tool hole in ram 45 mm Isdpfsfn Aqnsx Aaleap ram adjustment 100 mm ram surface 360 x 300 mm no. of strokes 55 Hub/min total power requirement 5,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 0,83 x 1,7 x 2,6 m

Year of construction: 1979, condition: used, pressure 75 t throat 260 mm stroke 16-80 mm Iodpfofn Ap Dex Aaleap table surface area 800 x 520 mm distance table/ram 350 mm strokes - infinitely variable 50 - 250 Hub/min ram surface 400 x 300 mm ram adjustment 70 mm total power requirement 7,5 kW dimensions of the machine ca. 2,7 x 1,7 x 2,6 m weight of the machine ca. 4 t hole in the table 260 x 180 mm - pneumatic Ortlinghaus air clutch with additional brake - Infinitely variable speed control using a Stöhrer drive - break plate - 2 hand control - additional clamping plate - Air storage tank for clutch - Circulating oil lubrication

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch Isdpfed Nl E Ujx Aaleap - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Condition: used, Year of construction: 1991, pressure 60 t Iaedpfx Asv Az T Sjalop throat 280 mm stroke 10 - 90 mm ram adjustment 60 mm no. of strokes 110 Hub/min table surface area 740 x 550 mm clamping plate 740 x 555 mm ram surface 380 x 200 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,850 t dimensions of the machine ca. B 1,1 x T 1,6 x H 2,3 m - fixed table - clamping plate - hydraulic clutch Ortlinghaus with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely technically inspected - new colour - shaft pulling, crack inspection, new seals - new control cabinet with touchscreen - current press inspection

Condition: used, pressure 55 t throat 250 mm stroke 10-90 mm table-size 640 x 495 mm Iaodpfx Aascp Apyolop no. of strokes 120 Hub/min ram adjustment 55 mm ram surface 290 x 210 mm ram hole 40 H7 mm hole in the table 220 x 190 mm T-slots 22 clamping plate 620 x 485 x 65 mm total power requirement 4,5 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 m

Condition: used, Year of construction: 1982, pressure 63 t throat 315 mm stroke 8 - 120 mm table surface area 630 x 800 mm dayligth 560 mm ram adjustment 70 mm no. of strokes 56/90 Hub/min Ijdpfxjt Ev Tns Aaloap ram surface 400 x 500 mm total power requirement 6 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 1,5 x 2,2 x 2,75 m The following work is/was carried out on the machine. partial overhaul: - Machine is completely disassembled, checked - Machine is repainted - new press safety valve - New separate control cabinet with touch panel and ABB safety control - new shaft bearing - A current UVV test and braking time measurement is carried out before delivery

Condition: used, pressure 63 t throat - mm stroke 16 - 125 mm table-size 800 x 600 mm force 250 cutting surface 1600 mm² table adjustment range 220 mm total power requirement 6 kW weight of the machine ca. 5 t distance table/ram 562 mm Iodpfxjch Umcs Aaljap press is to be dismantled and partially overhauled: - dismantling and checking - new colors - new control cabinet with ABB safety control and touch screen - current UVV test with brake time measurement and press test book - COnversion to safe operation

Condition: used, rated capacity 23 kW Iajdpfx Aasucgnijlsp rated current 43 A voltage 400 V For sale is an electrical control cabinet, which originally belonged to the a single-column eccentric press, make Erfurt, type PEE III/160

Condition: used, Year of construction: 1990, pressure 75 t throat 290 mm stroke 12 - 100 mm ram adjustment 80 mm no. of strokes 140 Hub/min table surface area 830 x 560 mm ram surface 630 x 300 mm total power requirement kW weight of the machine ca. 6,1 t Iaedet Ev T Ispfx Aalop dimensions of the machine ca. m

Year of construction: 1969, condition: used, pressure 63 t throat - mm stroke 16 - 125 mm table surface area 800 x 630 mm ram adjustment 70 mm no. of strokes im Dauerlauf 80 Hub/min max. distance table - ram 417 mm ram surface 500 x 400 mm clamping plate thickness 70 mm total power requirement 6 kW weight of the machine ca. 5,5 t dimensions of the machine ca. m Iaedpfxsh Dfctj Aaljp

Condition: used, Year of construction: 1998, pressure 80 t throat 335 mm stroke 8 - 100 mm no. of strokes 60/90 Hub/min table surface area 900 x 670 mm hole in the table 280 x 200 mm dayligth max. 450 mm ram adjustment 80 mm ram surface 700 x 450 mm tool dimension, max 700 x 450 mm weight of tools max. 140 kg total power requirement 11,07 kW weight of the machine ca. 6,5 t dimensions of the machine ca. BxLxH 1,72 x 2,0 x 2,82 m Iajdpouild Aefx Aaljp

Condition: used, pressure 63 t throat 315 mm stroke 16 - 125 mm max. distance table - ram 417 mm ram adjustment 70 mm no. of strokes 80 Hub/min table surface area 800 x 630 mm ram surface 500 x 400 mm total power requirement 6 kW weight of the machine ca. 5 t dimensions of the machine ca. 1,5 x 2,2 x 2,75 m Iedpfxjtqm Dqo Aaloap

Year of construction: 1980, condition: used, pressure 80 t Iaedpjdlcy Hsfx Aalsp throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion open tool, a current UVV test is carried out before delivery and braking time measurement.

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment Iasdpfxotycdke Aalop - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: P54762/12A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Iodpfx Aev U Nm Doaloap Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Maximum tool installation height: 355 mm Mold upper part weight: 250 kg MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 54796/14A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Ijdjv I Uwujpfx Aaljap Maximum mold height: 355 mm Mold upper section weight: 250 kg Mold height at bottom of cylinder: 355 mm MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Condition: ready for operation (used), functionality: fully functional, Technical data of the press: Name: Eccentric Press SCHULER Model: PD 63 Pressing force: 63 t Press dimensions (L x W x H): 1800 x 1300 x 2500 mm Press weight: approx. 4,500 kg Iaedpfxjw R Tl Tj Aalsp Table dimensions (L x W): 700 x 550 mm Table opening (L x W): 265 x 265 mm Ram (presser) size (L x W): 320 x 300 mm Ram stroke: 135 mm (fixed) Maximum daylight (distance from ram to table): 400 mm PLC components: SIEMENS SIMATIC S7-300 Pneumatic components: FESTO Control options: single stroke (foot pedal, two-hand lever), continuous operation (automatic mode with adjustable interval 1–99,999 s and repetitions 1–32,000) Special function: bottom dead center position setting Automatic central lubrication Pneumatic clutch and brake. Note: Two identical presses available (differing only in display size: 7” and 4.3”). Price for both presses: €10,500. No technical documentation available. PLC programming assistance via remote support by a programmer is possible. Shipping costs are extra. Urgent sale—need space for new equipment. Price is absolutely firm; after March 1st the presses will be disconnected from the power supply.