Used eccentric presses single column 25-54t for sale (80)

Condition: used, Year of construction: 1999, Press Model: T50 CNR4 Year of construction: 1999 Nominal force: kN 500 Mass: Kg. 3,500 Shots per minute: N° 90 Max. insertions per minute: N° 41 Min./max. operating air pressure: BAR 4÷5.5 Lhodpsx Nhbnsfx Adtjb Stopping time: 0.117 s Safety distance: 187 mm Energy: KJ 2000 Adjustable min./max. stroke: 8÷100 mm Hammer adjustment: 70 mm High adjustment P.M.I: mm.280 Maximum extraction stroke: mm. 30 Worktop surface: 770x530x58 mm Mallet surface size: mm. 450x300 Shank diameter: mm. 45 Protrusion from the centre: 270 mm Max. size mould: mm. 450x300 Upper mold mass: 84 kg Voltage: V 400

Condition: good (used), Year of construction: 1979, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Lhedpfx Adsxr Azxjteb Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: good (used), pressing force: 50 t, stroke length: 320 mm, Capacity 50 Ton Throat 225 mm Adjustable stroke 8 - 100 mm Number of strokes 320 p/min Ram size 300 x 280 mm Table size 500 x 800 mm Ledjtt A T Tepfx Adtshb Machine LxWxH: 160 x 120 x 260 cm Machine weight: 6 Ton

Condition: used, Year of construction: 2007, pressure 125 t stroke 12 - 140 mm daylight, max. stroke above - ram adjustment above 495 mm ram adjustment 100 mm ram surface 800 x 400 mm table surface area 1000 x 720 mm clamping plate 990 x 670 mm clamping plate thickness 80 mm total power requirement 70 A weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2770 x 2520 x 2950 mm - Hydraulically operated multi-disc wet multi-plate clutch and spring-loaded safety brake - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized ram height adjustment - Semi-automatic stroke adjustment Lhedpfx Adjxx A Dtoteb - Ram weight compensation - Manual TDC correction - Belt drive - Press force measuring device - hanging control panel - reverse switch (return) - electric stroke counter - electric preselection counter - electronic cam switch - clamping plate - two-hand control panel, swiveling, height-adjustable - Operating hours counter - 1 set of swing elements - with feed The press is technically inspected at our premises and undergoes a current safety inspection.

Condition: good (used), – Capacity 25 tons Lodpexk Tm Nofx Adtehb – Table 525 x 405 mm – Stroke 75 mm – 120 strokes/min. – Foot control or two-hand operation – Central lubrication system – 380V

Year of construction: 1978, condition: used, machine/vehicle number: 455 178, pression: 45 t throat: 230 mm table size: 460 x 690 mm clearance hole in the die: 175 x 220 mm Ledpjdd Irgsfx Adtehb table adjustment: 160 mm tappet area: 185 x 360 mm tappet adjustment: 55 mm stroke adjustment: 4 - 80 mm number of strokes: 120 /min engine: 380 V, 3 kW space needed: 1800 x 1100 x 2100 mm weight: 2800 kg

Condition: ready for operation (used), Year of construction: 1970, machine/vehicle number: 5058870, Pressure force: 25 tons Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Ram adjustment: 70 mm Stroke adjustment: 4 - 80 mm Number of strokes: 150 / min Ljdsm Uxzujpfx Adtjhb Drive Motor: 380V 1.1KW Required space: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, table height: 360 mm, table width: 810 mm, pressing force: 45 t, Manufacturer: AIDA Type: NC1-45 Lhsdpfsu Dkc Ajx Adtjb Pressure: 45t Year of manufacture: 1987.08. Stroke length: 80mm Distance above table:: (adjustable) 240-300mm Table size: 810x360 Bear size: 410x340 Electrical power: 3x200V(!!), 5.5kW - Japanese standard Net weight: 3300kg Size: 980x1480x2275mm

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, overall weight: 19,000 kg, pressing force: 160 t, height adjustment type: electric, power: 11 kW (14.96 HP), input voltage: 200 V, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Lhedpfx Adou D Dhxetob Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: excellent (used), Year of construction: 1990, power: 5.5 kW (7.48 HP), pressing force: 40 tons table size: 630x380 mm stroke length: 270 mm Lhsdpfx Ajlkfzzodtob pedal operation. flywheel diameter: 800mm

Condition: excellent (used), Single-column eccentric press Inv. No. 3647 Manufacturer: Ambold - WMW Model: PEEV 40.1 Press force: 40 tons * Stroke adjustment: 8 to 88 mm * Adjustable ram: 55 mm * Ram strokes: 160 strokes/min * Installation height: 390 mm Ljdpfx Aowxwt Eedtshb * Throat depth: 230 mm * Table area: 590 x 455 mm * Adjustable table!!! * Overload protection - shear plate * Foot / two-hand control * Separate clamping plate * Machine weight approx. 2700 kg.

Condition: new, Safety valve for presses IMI HERION / NORGREN PSV valve, twin valve, directional control valve Type: XSz 10 V ID No. 2492982 Serial No. 2608 Equivalent to order no.: 2492951 Pressure: 3 to 10 bar Compressed air connection thread (A)+(B)+(P)+(S): 1/2" Compressed air outlet (R): flange connection Supply voltage: 2x 24 Volt (DC) - Base plate hole spacing 115 x 63 mm, 4x mounting holes Ø 6.5 mm - Equipped with silencer on compressed air outlet (R) Valve body dimensions L x W x H: 105 x 90 x 220 mm Dimensions with silencer L x W x H: 180 x 165 x 220 mm Weight: 3.0 kg New, unused, from stock Lhodew T U A Sspfx Adtjb

Condition: used, Russian manufacturing, Max. pressing force: 25 t Table size: 550 x 400 mm Lhsdsxbf Sfopfx Adtob

Condition: good (used), Year of construction: 1987, functionality: fully functional, throat depth: 180 mm, ram adjustment: 60 mm, total height: 2,000 mm, table width: 360 mm, table length: 560 mm, total width: 950 mm, total length: 1,680 mm, overall weight: 1,750 kg, pressing force: 25 t, Projection 180 mm Smallest distance between press bed and ram at maximum stroke at bottom, Ram adjustment at bottom 50 mm Largest distance between press bed and ram at maximum stroke top, ram adjustment top 340 mm Lhjdet Sgruopfx Adtob Fold-through hole in table 150 x 100 mm Table adjustment 150 mm Ram stroke 12-80 mm

Condition: used, Single column eccentric press WEINGARTEN type ERV 40 Lhedeffm Hhspfx Adtob Machine No. 537 / 65 Year of construction 1965 Compressive force 40 ton. throat 230 mm table size 570 x 470 mm ram surface 250 x 200 mm clamping spigot bore Ø 40 mm installation height max. approx. 520 mm stroke adjustment 8 - 88 mm slide adjustment travel 63 mm Stroke rate 70 strokes per minute Drive power 3 kW Mains connection 380 Volt, 50 Hz - Table height adjustment - Overload protection by crushing plate - clutch-brake combination by WEINGARTEN friction thread clutch - electric 2-hand operation and foot switch - central lubrication via hand pump space requirement L x W x H 1600 x 1150 x 2300 mm weight approx. 2,6 ton.

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Lodpfx Astx E Rqedtjhb Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, Year of construction: 1961, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 595 x 410 mm ram adjustment 70 mm no. of strokes 150 Hub/min Lodpfx Adstqqxbetjhb table adjustable in height 240 mm total power requirement 1,1 kW weight of the machine ca. 1,45 t dimensions of machine L x W x H 1,30 x 0,80 x 2,0 m

Condition: used, Year of construction: 2000, functionality: fully functional, total height: 2,810 mm, total width: 1,240 mm, total length: 1,500 mm, overall weight: 4,300 kg, pressing force: 60 t, year of last overhaul: 2025, MODEL PE-63 Maximum force (pressing): 63 t Lodpfx Adjw S Icvotshb Upper work table length: 450 mm Upper work table width: 310 mm Lower work table length: 900 mm Lower work table width: 560 mm Central hole for scrap ejection: 250(280) mm Usable vertical daylight between tables: 430 mm Max. admissible closed die height: 340 mm Maximum strokes per minute: 38-100 /min Minimum slide stroke length: 8 mm Maximum slide stroke length: 92 mm Ram adjustment: 80 mm Machine height: 2810 mm Machine length: 1500 mm Machine width: 1240 mm Power: 5.5 kW Machine weight: 4,300 KG Year of manufacture: 2000

Condition: used, Year of construction: 2004, functionality: fully functional, total height: 2,810 mm, total width: 1,240 mm, total length: 200 mm, overall weight: 3,200 kg, pressing force: 50 t, year of last overhaul: 2025, DESCRIPTION Heavy-duty eccentric press with pneumatic clutch, supplementary counter table, centralised lubrication, and impact protection guards with a front methacrylate door. CE compliant. Lodpfxsw S Igbo Adtshb SPECIFICATIONS Maximum pressing force: 50t Upper work table length: 450 mm Upper work table width: 310 mm Lower work table length: 750 mm Lower work table width: 440 mm Central bore, scrap ejection: 160 mm Minimum closed die height: 290 mm Maximum closed die height: 340 mm Maximum strokes per minute (variable): 72 to 180 x min Minimum slider stroke length: 12 mm Maximum slider stroke length: 110 mm Spindle adjustment: 70 mm Machine height: 2,810 mm Machine length: 2,000 mm Machine width: 1,240 mm Power: 4 kW Machine weight: 3,200 kg Year of manufacture: 2004

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm Lodpscxxwcofx Adtshb stroke:6 - 82 mm ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: used, Year of construction: 1997, pressure:40 t throat:280 mm stroke of slide:8-120 mm no. of strokes:120 Hub/min throat:280 mm daylight:350 mm Lhedpfocxxmgsx Adtjb dayligth:270 mm table-size:710 x 565 mm ram surface:500 x 280 mm total power requirement:2,2 kW weight of the machine ca.:3,2 t

Condition: excellent (used), Eccentric press GALATO MOD. 100T/FZ/TL . Cycle engagement with brake-clutch group. Ljdpfx Ajvw A Hijdtjhb 4-guide hammer. Nominal force: Ton 100 Copi per min: 60 Adjustable stroke: mm 8-108 Plan size: mm 900 x 580 Hammer size: mm 510 x 350 Hammer adjustment: mm 70 Centre wing protrusion: mm 300 Hole diameter: mm 150 Hammer hole diameter: mm 50 Distance between plan and hammer: 500 Distance between shoulders: mm 370 Motor power: Hp 10 Weight approx: Kg 6200 Dimensions: mm 1300 x 1700 x 2650 Front protection with photocells

Condition: good (used), Eccentric press Stroke: 55 mm Ram adjustment: 8 – 96 mm Turn: 50 1/min Max force: 45 t Lhjdpfjg Uf D Hex Adteb Weight: 2550 kg

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Lhedpfx Ajmi Rpiodteb 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: new, Year of construction: 2025, table width: 400 mm, table length: 600 mm, stroke adjustment: 45 mm, overall weight: 1,500 kg, pressing force: 35 t, stroke length: 70 mm, power: 3 kW (4.08 HP), punching force: 35 t, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 35 Ton is designed for stable performance in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for serial production. Key Advantages - Consistent stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement thanks to centralized automatic lubrication - Production-ready operation with PLC control and dual-hand/foot pedal controls Applications - Cold cutting and punching operations - Cold cropping applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided guideways • Spheroidal cast iron connecting rods and gear bearings • Crankshaft and transmission shafts made from 4140 tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • Conforms to CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand safety system • PLC control system Lhodpjx N Nd Rjfx Adtjb • Dual-hand/foot pedal control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • CE compliant ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies tailored to your specifications • 8-sided slide guide ✅ TECHNICAL SPECIFICATIONS (35 TON) Capacity: 35 Ton Usable bolster size: 400×600 mm Stroke length: 0–70 mm Nominal material thickness: 2.5 mm SPM (strokes per minute): 120 Bolster–ram distance: 330 mm Adjustment (ram adjustment): 45 mm Bolster hole diameter: Ø130 mm Ram die shank diameter: Ø35 mm Safety lock: Mechanical safety lock Lubrication system: Automatic lubrication PLC: Included Safety barrier: Included Operation system: Pneumatic clutch–brake system Mounting type: Floor-standing Frame type: C-type steel construction Motor power: 3 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×H): 1100×1400×1800 mm Approximate weight: 1500 kg Note: Please contact us for any modifications required in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.