Eccentric press

Helmerding EH 25

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Ksdpfxsyath To Adtewt Weight: 2 tons Good condition

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight Kjdpjkvnumsfx Adtowt 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2001, grinding length: 650 mm, grinding width: 525 mm, total height: 350 mm, table length: 600 mm, table width: 350 mm, Manufacturer: Geibel & Hotz Type: FS 635-Z SA Control: Digital read out Year of construction: 2001 Magnetic table 600 x 350 mm Closed housing for CE Automatic vertical lubrication SA Kwodpsvdal Aofx Adtjt Automatic lubrication Coolant tank Specifications Metric US Standard X - axis 650 mm Y - axis 525 mm Z - axis 350 mm Table length 600 mm Table width 350 mm Table load 400 Feed X - axis 35000 mm/min. Feed Z-axis 1000 mm/min. Grinding stone dimensions 300 x 50 x 76.2 mm Power output 3.7 kW Speed 2800 ? rpm Dimensions (estimate) length 3200 mm width 2000 mm height 2870 mm weight 2300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 1986, grinding diameter 350 mm grinding length 600 mm centre height 175 mm Very well maintained machine. The machine comes from a precision grinding shop from the Black Forest. Can still be viewed under power for a short time at the seller's premises. In 2022, the machine was partially overhauled and serviced in-house with production of the geometry according to the manufacturer's protocol. Equipment: -2-axis digital readout FAGOR -sine bar Kwodpfxsv Tqqno Adtst -tailstock with fine adjustment -Hydraulic tailstock -Surface grinding device -Internal grinding device -Fischer UJ70 internal grinding spindle -Paper belt filter -automatic sequence: roughing-finishing-firing-retur Translated with (free version)

Year of construction: 2002, condition: used, pressure 63 t Kwsdpolp U D Tsfx Adtjt throat 315 mm stroke 8-100 mm no. of strokes 140 Hub/min ram - range of adjustment 63 mm table surface area 1200x630 mm ram surface 800x315 mm hole in the table Ø 110 mm table height 820 mm tool hole in ram Ø 50 mm dayligth 335 mm total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: good (used), 16 pieces tool holder external machining 41 piece tool holder internal machining Kodeikn E Hspfx Adtewt

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Kjdsr A Eifjpfx Adtswt

Condition: used, Year of construction: 2001, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, nominal power (apparent): 17 kVA, torque: 82 Nm, controller manufacturer: Heidenhain, controller model: Mill Plus, total height: 2,450 mm, total length: 4,000 mm, total width: 2,200 mm, table width: 700 mm, table length: 500 mm, table load: 200 kg, overall weight: 3,500 kg, We are offering here a Deckel Maho DMU 50 T with Heidenhain Mill Plus control for sale. Kwodpfx Adsw Dfbhjtot

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm Kwedeb U Hwpspfx Adtet table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

Condition: ready for operation (used), Year of construction: 1994, The press brake was manufactured in 1994. The working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Press force: 600 kN Kwjdpfjp R Ircex Adtot Weight: 4000 kg Power: 10 KW