Used conveyors & conveying systems for sale (171)

Condition: new, Centering chain conveyor for raw material 40-200 mm, front end can be adjusted higher/lower. Engine 1.5 kW. Totally new conveyor. Bwsdpfxewk Rnas Ac Tst

Condition: used, Trolley 7 levels - year of construction unknown - min. part length 320mm Bwjdowbtvzepfx Ac Tot - max. part height approx. 210mm - number of levels 7 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Condition: used, Trolley 12 levels Bwjdjwbtvuopfx Ac Tet - year of construction unknown - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Condition: used, Chain conveyor - IDL000773 Bsdeufib Rjpfx Ac Towt - length: 6,1 m - working width: 600 mm - electric motor: 1,1 kW - Chain conveyor with pushers after moulder or resaw.

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm Bwodpfsgvvn Eox Ac Tot feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Belt conveyor Belt width: 0.1m Between belts: 1.2m Length: 1.5 m Width: 1.5 m Bjdjwmm N Eepfx Ac Tjwt Height: 90 cm Power (kW): 0.25

Condition: used, Roller conveyors Length: 3.63 m Bwjdpewmnwkjfx Ac Tst Width: 0.8 m Roll width: 0.7 m Height: 20 - 60cm

Condition: used, Multi-station bridge unloader for unloading panels from an angle saw Panel Size: * Maximum length: 3200 mm (4200 – 5600 mm) * Minimum length: 300 mm * Maximum width: 1300 mm * Minimum width: 200 mm * Maximum thickness: 150 mm * Minimum thickness: 10 mm * Maximum height from the ground: 1850 mm * Minimum height from the ground: 250 mm * Maximum working height: 1600 mm Bwsdpfx Aerzhd Soc Tjt Load capacity: * Maximum weight per cycle: 250 (350 – 500 – 700) kg Work rate: * Charger: 8-10 cycles/minute * Unloader: 8-10 cycles/minute This unloader is particularly suitable for moving significantly heavy boulders in various product double beam structure and the Brushless motors make it fast and suitable for the automation of high-performance lines productivity []

Condition: used, Double picking station feeder. Designed to serve production lines of drilling, squaring, edging, squaring, pantographing, sanding and painting without operator supervision. Fully automatic not need for manual adjustments during the manufacturing process Bwodpfoqvt Ecsx Ac Tot Working dimensions: * Maximum length: 3000 mm * Maximum width: 1300 mm * Automatic double station panel unloading system. * Work capacity 13 minute cycles * Panel gripping system via motorized arm with suction cups with vacuum drive system TECHNICAL DETAILS TO BE CHECKED

Condition: used, Chip conveyor Bodpfxjzi T E Ne Ac Tswt Width: 500 mm Height: 900 mm Used for wood chip transportation after screen

Condition: used, Feed unit with 6 drum motors Round motor Motor roller Drum motor Bsdpfx Asq E Ipbsc Towt

Condition: used, heavy duty roller conveyor for buffering laminated beams or as a heavy-duty roller conveyor Bjdpfx Acjk Iuglj Tjwt from length 6 m up to a length of 84 m >also suitable for steel transport etc

Condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -without: hydraulic unit (can be supplied at an extra cost) -Turning station for: rotating workpieces -Inner width: 1075 mm -Interior height: 720 mm Bwodpfed Tg Dcsx Ac Tst -Transport dimensions: 2840/1600/H2300 mm -Weight: 969 kg

Year of construction: 2010, condition: excellent (used), I sell the automatic magazine GRUNDNER SONDERMASCHINEN MLD. Storing 82 Positions of Material 2,80 x 2,10m Total size 52 x 11,5 m x h. 2,3 + 1,5m. / Double-Deck Loading / Unloading 2 + 1 Positions. Bwjdpfx Acjyzcgie Tst Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Security fence system fully complete ! Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: used, - Manufacturer: Hackemack Bwsdexz Hb Uopfx Ac Tet - Working width: 1300 mm - Roller diameter: 65 mm - Roller pitch: 100 mm - All rollers with rubber surface - Infinitely variable feed via handwheel - Feed speed approx. 2 - 8 m/min - Length: 1,900 mm + folding table 600 mm, 2,500 mm - Voltage, Hz: 400 V / 50 Hz - Location: In stock, D-32825 Blomberg

Year of construction: 1995, condition: used, Water-based painting system complete with 865 linear meter chain with tracks, Sames reciprocators with rotating cups, generators, painting pumps, chart tables and accessories Bwodpfx Asit Rrvec Tjt

Condition: used, machine/vehicle number: 007998, Max. panel width: 1900 mm Max. panel length: 2700 mm Max. forward feed speed: 30 m/min Bodpfx Acow Idaco Tjwt

Condition: used, Tecnoaspirazioni overhead painting chain, complete with towing device, tracks, and poles. Length approximately 220-240 meters. Bjdpfxeit Umfs Ac Towt

Year of construction: 2010, condition: used, controller model: POWERTOUCH, power: 30 kW (40.79 HP), workpiece length (max.): 18,800 mm, workpiece width (max.): 15,000 mm, feed rate X-axis: 80 m/min, TECHNICAL DETAILS Workpiece length: 18,800 mm Workpiece width: 15,000 mm Min. plate length: 2,000 mm Max. plate length: 4,300 mm Min. plate width: 800 mm Max. plate width: 2,200 mm Max. feed rate: 80 m/min MACHINE DETAILS Bwsdpfx Acezmtmnj Tet Control system: POWERTOUCH Total connected power: 30 kW EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5107

Condition: ready for operation (used), working length 3600 mm Working width 1500 mm Working height ca. 900 mm WEINIG Return Conveyor System RF15 ----- Can be used after moulders, planers, and milling machines with a maximum feed speed of approx. 22 m/min. Technical Description: Workpiece length: 250 - 3,600 mm Workpiece width: 30-230 mm Bwsdpfx Acoxpn Tnj Tot Longitudinal-transverse conveyor with two integrated, driven roller conveyors: Transverse conveyor path 1,500 mm Constant conveyor speed: 30 m/min Roller conveyor length 2,200 mm Return roller conveyor (non-driven) to the operator (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Automatic double cell loader without pit for use in a squaring-edging line Motorized panel introduction transfer Double automatic panel loading station Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Bwodpfx Acorzhfho Tst Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Programming and control system

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from longitudinal to transservsal This device is commonly used in the wood and furniture industry to facilitate the movement of Bwodpfx Acorzhfaj Tet panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: new, Board separator conveyor Outfeed after HewSaw Manufacturer / model: Drive experts UK CA Bwodeyknpmopfx Ac Tjt Type: 3E100L4D-FC-A0-D36 Power: 3.0 kW RPM: ~1450 rpm (50 Hz) ~1750–1760 rpm (60 Hz)

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. Bjdpjrzhfdofx Ac Tewt * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from transverse to longitudinal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: excellent (used), LECEB S300 HIGH SPEED MOULDER INFEED CAPABLE OF FEEDING LONG AND SHORT BOARDS AT HIGH SPEED UP TO 3OOM/MIN+ SUITABLE FOR FEEDING SHORT LENGTHS DOWN TO 2.05M WITHOUT LOSS OF EFFICIENCY SUITABLE FOR LENGTHS UP TO 6.0M SUITABLE FOR THICKNESS FROM 8MM+ Bwodpfx Acezmmrqj Tot SUITABLE FOR RECEIVING RESAWN BOARDS WHICH CAN BE AUTOMATICALLY LOADED TO THE MAGAZINE FOR HIGH SPEED FEEDING VERY SUITABLE FOR USE IN BETWEEN SPLITTING SAW MOULDER (OR RESAW) AND HIGH SPEED MOULDER