Used machining centers (vertical) X-axis travel 400-599mm for sale (234)

Condition: used, TECHNICAL DETAILS - Number of axes : 3 Dcjdsxcbt Uopfx Aqvep MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : BLUM Z NANO

Condition: used, Year of construction: 2001, controller model: Siemens 840D, 1 CNC 5-axis vertical machining center, make Stama, type MC 535/S, with fixed rotary table, SK-40, 42-tool magazine, tool breakage control, year 2001, machine no. 5351126, Siemens 840 D control, with Knoll filter unit type VRF 300/800, with chip conveyor Knoll type 340 K-1/100. Dodpfx Aey Nb Syeqvecp

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) Dodpfxou Idn Hs Aqvecp *

Condition: used, Year of construction: 2009, FANUC Robodrill ALPHA T21iFa Fanuc 31i control X 500mm Y 400mm Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Spindle speed 24,000 rpm NIKKEN DD5AX-200AF 5-axis rotary table Tool height sensor on the table Dodpfx Aezrkyceqvjcp

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 10.1 [kW] - Spindle speeds : 10 - 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50/50/50 [m/min] - Cutting feed rates (X/Y/Z) : 10/10/10 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie Dsdpfx Ajuhbunoqvecp - Tool magazine capacity : 14 - Tool exchange time : 1,7 [sec] TABLE - Table dimensions : 600 x 320 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 15.9 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1,624×2,829 [mm] - Machine height : 2,608 [mm] - Machine weight : 2300 [kg] MACHINE HOURS - Number of hours under power : 1479 [h] EQUIPMENT - CNC : BROTHER CNC-B00 - Electronic handwheel - DIVIDING UNIT * manufacturer : KITAGAWA * model : MR160LAS16 - Coolant tank - Robot interface - Automatic gate - Electric transformer - Tool-holders : 15

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 360 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, number of axes: 3, This 3-axis CHIRON FZ 12 KW vertical machining center was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. The machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Two Chiron units in combination with two x Fanuc M - 20iA (2011) Machine Benefits Dodpfx Aqozvyaajvecp Technical Machine Benefits • Controlled axes: 6 axes • Reach: 704 mm • Acceleration/deceleration: 0 to 12000 min-1 in 0. 6 seconds • Clamping surface: 820 x 440 mm² • Drilling capacity in st 60: Ø 16 mm • Tapping: m 16 • Milling capacity in st 60: 80 cm³/min • Acceleration: x & y axis 0. 7 g, z axis 1. 0 g Extra Information Movement Axis Movement Range and Speed: J1: 340°/360° (option) at 350°/s J2: 200° at 350°/s J3: 388° at 400°/s J4: 380° at 450°/s J5: 240° at 450°/s J6: 720° at 720°/s Allowable Load Moment: J4 & J5: 11.9 Nm J6: 6.7 Nm Repeatability: +/- 0.02 mm Maximum Speed J1: 195°/s J2: 175°/s J3: 180°/s J4 & J5: 400°/s J6: 600°/s Allowable Load Moment J4 & J5: 7.7 Nm J6: 9.8 Nm Tools Automatic Tool Changer: Tool Pockets: 24 Tool Change Time: approx. 0.9 s Chip-to-Chip Time: approx. 2.4 s The workpieces are supplied via an automated feeding system and sequentially loaded into the Chiron machining centres by two Fanuc industrial robots. Depending on the process specifications, these are either palletised automatically or further processed in a downstream step, for example by riveting. The entire system operates fully automatically.

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Dcedpspkyn Refx Aqvjp Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Dcodpfxjw Ed U Ne Aqvop Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 30000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450/270/310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+90 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 40 TURNING SPINDLE - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - C axis indexing precision : 0.001 [°] - Travel : 360 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500X2600 [mm] - Machine height : 2300 [mm] - Machine weight : 2850 [kg] Dedpeuhbr Tefx Aqvecp MACHINE HOURS EQUIPMENT - CNC : Siemens 840 D - 3 colors status lamp

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Dcodsyb D Dbepfx Aqvsp Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm Dodpfx Aqsyb Nc Njvjcp T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Travel range, Z-axis: 508 mm Distance from spindle nose to machine table: max. 610 mm Distance from spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Tool diameter (overall): max. 89 mm Dedpfezxhmtox Aqvjcp Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s MACHINE DETAILS Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full-load current, three-phase, low: 70 A Input voltage AC, three-phase, high: 440 V AC Full-load current, three-phase, high: 35 A Weight: 3539 kg The seller estimates the operating hours to be approximately 9,000 hours. EQUIPMENT 20-position tool changer Chip conveyor Internal cooling, 21 bar Coolant mist extraction system Additional coolant filter

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 2.2 / 3.7 [kW] - Spindle speeds : 15.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 300 / 250 / 250 [mm] - Rapid traverses rates (X/Y/Z) : 48 / 48 / 48 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 12 - Tool exchange time : 1.6 [sec] PALLET CHANGER - Table dimensions : 400 x 250 [mm] - Pallets number : 2 Djdpfx Aowdamrjqvocp - Maximum weight upon table : 100 [kg] - Pallet exchange time : 3 [sec] - Distance table / spindle nose (min./max.) : 180 - 430 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 21 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2.690 x 1.570 [mm] - Machine height : 2.420 [mm] - Machine weight : 3.300 [kg] EQUIPMENT - CNC : Fanuc Oi-MD - 3 colors status lamp - Coolant tank - Oil mist extractor - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,317 h, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, controller model: Fanuc i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 520 mm Travel range, Y-axis: 360 mm Travel range, Z-axis: 350 mm Spindle speed: 12,000 rpm Distance spindle to base plate: min. 150 mm / max. 500 mm Table area: 650 × 375 mm Table load: 2 × 200 kg Tool weight: max. 2.8 kg Tool magazine: 14 positions MACHINE DETAILS Control system: Fanuc i Dimensions & Weight Dimensions (L x W x H): 3,230 × 1,620 × 2,507 mm Machine weight: approx. 5,200 kg Operating hours: 14,317 h EQUIPMENT Rigid tapping – thread drilling without compensation chuck Spindle overspeed and power display Telescopic guards on the X, Y, and Z axes Rapid traverse in the X, Y, and Z axes Door safety switch 3-color indicator light Work area lighting Coolant supply from a 200-liter tank via adjustable coolant nozzles at the spindle nose Internal cooling Machine cover, closed on top / Top cover Oil skimmer Pneumatic clamping system A, 1 pair per pallet Dcedpfezul R Isx Aqvsp Automatic work area door with safety strip Coolant system with delivery pressure: 4.5 bar

Condition: new, functionality: fully functional, feed length X-axis: 1,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, spindle speed (max.): 10,000 rpm, XV 1060 Control SINUMERIK 828 D - ShopMill with 15.6" touch screen Clamping surface 1,160 x 600 mm, number of T-slots: 5 X-axis: 1,000 mm, Y-axis: 600 mm, Z-axis: 650 mm Min. distance spindle nose - table: 130 mm, max. 780 mm SK 40 taper, spindle max. speed 10,000 rpm Double-arm tool changer, 24 tools Standard features: - Rigid tapping - Swiveling operator panel - Sliding door with interlock - Viewing windows in work area enclosure - Control cabinet with heat exchanger - 2 LED work area lights - 3-color machine status indicator light - Portable electronic handwheel - Central automatic grease lubrication for all linear axes and X, Y, Z ball screws - Power-off after program end - Compressed air at main spindle for chip removal - Chip flushing system with rinse gun - Spindle cooler for 10,000 rpm - Air gun Djdpfxsxugyqe Aqvecp - Coolant nozzles at spindle - Work area lighting on/off switch - 1 set of leveling elements - Electrical system in accordance with VDE regulations

Condition: excellent (used), Working travels 510 x 360 x 300 mm Table size 600 x 360 mm Dodpfx Asuy S Hbeqvecp Spindle taper BT30 Spindle speeds -12'000 rpm Tool changer 20 Pos. Control FANUC 18i-MB Coolant through spindle misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 500 mm, controller manufacturer: Fanuc, controller model: 31i - Model A5, spindle speed (max.): 20,000 rpm, tool diameter: 125 mm, tool length: 250 mm, tool weight: 7,500 g, operating hours of spindle: 5,000 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 20,000 rpm HSK63 180 tool positions IKZ 20 - 80 bar programmable Bar passage Ø 65mm Hainbuch clamping top BZI65 LNS Servo II bar feeder (flat and 4-edge) Renishaw tool measurement/breakage monitoring Djdpfx Ast Azdtoqvecp CLIMATIZED machine room 2 spreader center clamps with hydraulic pressure regulation, Delivery/invoice possible from 2 locations: Swiss plant Austrian plant

Condition: ready for operation (used), Year of construction: 2013, TECHNICAL DATA Brand: FANUC Model: ROBODRILL α-D21LiA5 Year: 2013 CNC: FANUC 31i-MODEL B5 Serial Number: P135 YH478 TABLE DIMENSIONS Table size: 850 x 410 mm Load capacity: 300 kg T-slot spacing: 125 mm Number/size of T-slots: 3 x 14 mm TRAVELS X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Distance from table to spindle nose: 150 to 480 mm FEEDS Rapid traverse X/Y/Z: 54 m/min Cutting feedrate: 1 to 30 m/min MOTORS Drive motor: 11 kW (1 min) / 3.7 kW continuous Feed motors X/Y/Z: α8/4,000is (2.9 kW) TURRET Taper: MAS BT 30 Drawbar type: MAS P30T-1 (45°) Column to spindle center distance: 400 mm PRECISION Positioning accuracy: 0.006 mm Repeatability: ±0.004 mm Tool magazine capacity: 21 Maximum tool length: 250 mm Tool change time: Approx. 1.8 s SPINDLE Spindle speed range: 100 to 10,000 rpm Spindle taper: 7/24 Taper No. 30 Internal cooling MACHINE DIMENSIONS Machine height: 2,236 ± 10 mm Floor space required: 2,115 x 2,040 mm Machine weight (including control section): Approx. 2,100 kg Dcsdpfoy At Aqox Aqvep POWER SUPPLIES Electrical supply: 11 kVa Compressed air requirement: 0.35 to 0.55 MPa (gauge pressure) (0.5 MPa recommended), 0.15 m3/min (150 l/min) (at atmospheric pressure) ACCESSORIES Original FANUC 4th axis rotary table DDR (new price €18,000) Zero point clamping system Schunk NSE plus 138-V1 mounted on rotary (new price €2,100) Two Schunk KONTEC KSM2 90-400 vices (new price €2,000 each)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,831 h, functionality: fully functional, machine/vehicle number: 15465588584, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller model: Heidenhain iTNC 530 HSCI, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 375 mm B-axis: -5 to +110 degrees C-axis: 360 degrees Table dimensions: 450 x 400 mm Maximum workpiece weight: 250 kg Spindle speed: 18,000 rpm Tool interface: HSK-A63 Number of tool positions: 60 Rapid traverse rate: 80 m/min MACHINE DETAILS Control system: Heidenhain iTNC 530 HSCI Machine weight (approx.): 7,150 kg Operating hours Spindle hours: 23,831 h Power-on hours: 57,330 h EQUIPMENT Band filter system NC rotary table Handwheel FS Coolant gun Tool measurement system Chip conveyor Dcodpfx Ajzgt U Ejqvjp Rotoclear viewing window Temperature monitoring

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Dcedpfx Aow T Tlreqvop Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: like new (used), Year of construction: 1985, Parts shown by hand not come. 4 axis not come with machine. Djdpfxsgw Shre Aqvjcp

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,934 h, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: HAAS, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details. • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 Dsdjyhfltepfx Aqvjcp • Tool changer: • Type: Automatic Tool Changer (ATC) • Capacity: 18 tools • Working hours (from control): • Servo time: 9,158 h • Motion time: 4,984 h • Spindle time: 5,934 h • Idle time: 0:44 h • Electrical data: • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 20 A • Largest load: 35 A • Short-circuit interrupting capacity: 10,000 A Technical Specification Taper Size HSK 32

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 21,000 rpm, number of axes: 4, This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document). Dcjdex D N Ntspfx Aqvjp Machine Benefits Technical Machine Benefits • 4 cnc axes, with chick horizontal axis dividing head and support bearing. • 21 tools • X =m 500 mm / y = 400 mm / z = 330 mm • Central coolant system with pump and filtration • Oil tank. Technical Specification Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2010, operating hours: 28,600 h, functionality: fully functional, Machine partially overhauled by Willemin with new geometry. Ready for production. Country of origin: CH (Switzerland) Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 Dsdpfx Asw T Tk Isqvscp X Axis: 450 mm Y Axis: 200 mm Z Axis: 425 mm B Axis: -45° to +100° U Axis: 300 mm Tool magazine: 48 stations PickUp Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motorized spindle: HSK40E, MAX 30,000 rpm Subject to error or omission, technical data provided without obligation.

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, controller model: FANUC, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 9,870 h, number of slots in tool magazine: 30, VC 430 - worked in 1 shift only. Still precise and well maintained over the years. We need space in december so machine has to go out. Dcsdpfxsv Acpuj Aqvop