Used machining centers (vertical) X-axis travel 1000-1199mm for sale (348)

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,814 kg, overall weight: 7,485 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 44,700 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis HAAS VF-3YT/50 was manufactured in 2019. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a high-performance spindle capable of 10,000 rpm and a 30-position automatic tool changer. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3YT/50 vertical machining centre we have for sale. Contact us for further details. • Condition: Used, fully operational • Operating/cycle hours: 6,744 h • Spindle/cutting hours: 4,454 hTravels • Spindle nose to table: 201–836 mm • Rapid traverse: 18 m/min • Maximum cutting feed: 12.7 m/minSpindle and tool changer • Maximum torque: 460 Nm • Drive system: Vector drive with 2-speed gearbox • Tool changer capacity: 30 toolsTable • Table size: 1,372 × 610 mm • T-slots: 7 • T-slot width: 15.9–16 mmShipping • Note: Dimensions listed as 1,370 × 660 × 630 mm are not overall machine dimensions • Export shipping dimensions (approx.): 3,970 × 2,600 × 3,230 mm • Approx. shipping weight: 7,485 kg Additional equipment Gbedpfxszwd Auj Acijt • Chip conveyor with four additional augers • Haas Chip Lift • Through-Spindle Coolant (TSC), 300 psi / 21 bar • Programmable coolant nozzle • Coolant chiller • ACF 25-micron auxiliary coolant filter • Coolant mist condenser • Minimum Quantity Lubrication (MQL) • Automatic air gun • Through-Tool Air Blast (TAB) • PulseJet system • Renishaw Wireless Intuitive Probing System (WIPS) with probe riser block • Fourth-axis drive and wiring • High-Speed Machining (HSM) • DWO/TCPC (Dynamic Work Offsets/Tool Center Point Control) • RTAP-3 synchronized tapping • Wi‑Fi network connection and Wi‑Fi camera • Automatic door • High-intensity lighting • Approximately 15 tool holders • Complete documentation Technical Specification Taper Size ISO 50

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 620 mm, table length: 700 mm, number of slots in tool magazine: 24, Equipment: documentation/manual, MIKRON VCE 600PRO VERTICAL MACHINING CENTER, MANUFACTURED IN 2011 Godpey Tvr Nsfx Acisbt EQUIPPED WITH HEIDENHAIN iTNC 530 ELECTRONIC HANDWHEEL TRAVELS: X 600, Y 500, Z 540 MM TABLE SURFACE: 700 x 620 MM 24-TOOL RANDOM TOOL CHANGER SPINDLE AT 10,000 RPM, 18 KW SPINDLE COOLING DUAL CHIP CONVEYOR LINEAR SCALES INTERNAL COOLING AT 18 BAR TOOL MEASURING PROBE

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer Gbodpfx Acjd I R E Nsiot • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2000, operating hours: 32,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, overall weight: 4,900 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2000. It features a travel range of 1000 mm in the X-axis, 600 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a vertical tool changer with 24 stations and a maximum permissible load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 103 V vertical machining centre we have for sale. Contact us for further details. - Rapid Traverse (X/Y/Z): 30 m/min- Max. Permissible Load: 800 kg- Tool Changer: Vertical tool changer with 24 stations- Machine Weight: approx. 4,900 kg- Main Drive: Speed-controlled asynchronous motor 9/13 kW- Electrical Specifications: 400 V, 3+PE~, 50/60 Hz, 50 A, 30 kVA, Control voltage 230 V / 24 V=- Operating Hours: approx. 32,000 operational hours (cabinet counter reads 054888 h)- Included / Additional Equipment: Chip conveyor, dividing head with counterholder (4th axis, currently disconnected)- Operational Condition: Configured for 4 axes; 4th axis power unit failed/disconnected; operated as 3-axis machine until end of 2021; out of service and available immediately Gbedpezu Nygefx Aciet

Condition: good (used), Year of construction: 2015, Micromill V 22, year of manufacture 2015, Heidenhain TNC 620 control, travel X/Y/Z 1000/570/560 mm, table size 1100 x 520 mm, max. table load 800 kg, spindle speed 15,000 rpm, 30-position tool magazine, SK 40, internal spindle cooling, oil skimmer, cooling unit, electrical cabinet air conditioning, chip conveyor, total spindle hours 5,500. Gedex Hynnopfx Aciobt

Condition: used, Year of construction: 2009, FADAL VMC 3016 FX MACHINING CENTER YEAR OF FIRST INSTALLATION: 2009 CNC: GE FANUC SERIES 0i - MC TRAVELS: X: 762 mm Gedpfszg Ivwox Acijbt Y: 406 mm Z: 508 mm SPINDLE SPEED: 10,000 RPM TOOL MAGAZINE: 20 POSITIONS TAPER: ISO 40 INTERNAL COOLANT SYSTEM CHIP CONVEYOR

Condition: excellent (used), functionality: fully functional, Double column VMC YCM DCV 3016B CNC control: Fanuc MXP-200FB Gedpfx Acjvurlcjijbt Manufactured: 2013 Max travel: X 3060mm, Y 1600mm , Z 762mm Working table: 3260x1500mm Distance between columns: 1820mm Distance between working table and tip of spindle: 200-962mm Max RPM: 4500rpms, 2-shifts gearbox Spindle taper: BBT50 Tool magazine: 40 tools Through spindle coolant CTS Machine thoroughly checked, fully working in very good condition.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,563 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 900 kg, overall weight: 7,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma M560-V was manufactured in 2016. It features a generous X-axis travel of 1050 mm, Y-axis travel of 560 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 22 kW spindle and a tool magazine that holds 32 tools. If you are looking to get high-quality machining capabilities, consider the Okuma M560-V vertical machining centre we have for sale. Contact us for further details. • Table size: 1300 × 560 mm Gbsdpfx Acey Nb T Doijt

Condition: ready for operation (used), Year of construction: 2013, operating hours: 989 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, controller manufacturer: HAAS, table width: 267 mm, table length: 1,467 mm, table load: 159 kg, overall weight: 2,295 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, number of slots in tool magazine: 10, number of axes: 3, This 3-axis HAAS HAAS TM-2P was manufactured in 2013. It features an X-axis travel of 1016 mm, Y-axis travel of 406 mm, and Z-axis travel of 406 mm. The machine includes a table size of 1467 x 267 mm and a maximum table load of 159 kg. If you are looking to get high-quality machining capabilities, consider the HAAS HAAS TM-2P vertical machining centre we have for sale. Contact us for further details. • Max tool diameter: 89 mm • Positioning accuracy: 0.01 mm • Repeatability: 0.01 mm • Air pressure: 6.9 bar • Air consumption: 113 l/min Gsdpfjzcnzmsx Aciebt • Power supply: 3 × 400 V, 50 Hz Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2018, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Internal coolant system Chip conveyor Godpszmy T Ujfx Aciobt Detachable handwheel

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available Gsdpfezvni Ajx Aciebt

Condition: good (used), Year of construction: 2013, CNC Machining Center Posmill C 800 Kompakt Year of manufacture: 2013 Operating hours: Machine on: approx. 47,000 hrs Program run: approx. 5,700 hrs Spindle: approx. 4,800 hrs Spindle: SK40 Spindle speed: 10,000 rpm Tool changer: 24 positions Travel: X 800 / Y 520 / Z 550 mm Table size: 950 x 520 mm Control: Heidenhain iTNC 530 The spindle was replaced in 2022. + Through-spindle coolant (IKZ) + Hexagon probe Sale WITHOUT NC clamps and tool holders! Gsdey D Uf Nepfx Acisbt Dimensions (LxWxH): approx. 260 x 260 x 270 cm Weight: 6,800 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 826, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: 18IMB, table width: 1,650 mm, table length: 650 mm, table load: 1,500 kg, spindle speed (max.): 6,000 rpm, spindle nose: 50, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, With Manual Guide, rigid tapping, helical interpolation, chip conveyor, high pressure 20 bars. Vertical machining center AA1565#50 CNC FANUC 18IMB Table dimensions: 1650x650 mm Max weight allowed: 1500 kg Longitudinal X-travel: 1500 mm Gjdpfx Aeyf E Ayjcijbt Cross Y-travel: 650 mm Vertical Z-travel: 650 mm Spindle nose: 50 ISO Spindle speed: 6000 rpm. Motor power: 15-18 Kw Rapid X,Y,Z axis: 24000 mm/min Tool Stations: 30 no.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,800 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h (estimated) • Due to the installation of a new hard drive, the spindle hours can no longer be accurately verified. • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Only steel and aluminium have been machined. • Internal coolant system • The machine has a double-wound AC spindle motor. • The axes are also directly driven. • The machine does not have a direct measurement system. Additional equipment • Chip conveyor • WinMax Mill Version V09.01.39314 • Removable handwheel • No Accessories included, but can be purchased at a reasonable price for an additional charge. Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun Gsdpjy Tw R Hefx Acisbt • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating statuswith deep-hole drilling cycle function Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: FANUC, controller model: 18 IM, table width: 800 mm, table length: 1,550 mm, table load: 1,800 kg, spindle speed (max.): 6,000 rpm, distance table to spindle center: 900 mm, spindle nose: BT50, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, TABLE Table dimensions: 1550x800 mm Max weight allowed: 1800 kg CAPACITY Longitudinal X-travel: 1400 mm Cross Y-travel: 800 mm Vertical Z-travel: 700 mm SPINDLE Spindle nose: BT50 ISO Gbjdpfsw D Enhox Aciet Spindle speed: 6000 rpm. Motor power: 18-22 Kw ADVANCES Rapid X,Y,Z axis: 24000/24000/20000 mm/min TOOL WAREHOUSE Tool Stations: 30 no. SPECIFIC PROPERTIES Distance between table surface and spindle nose: 200–900 mm Distance between table and floor: 980 mm Max torque (continuous / 30 min): 626 / 740 Nm Positioning accuracy: 0.015 mm Repeatability: 0.008 mm

Condition: like new (used), Year of construction: 2024, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 25 m/min, controller manufacturer: Heidenhain, controller model: TNC640, workpiece weight (max.): 1,000 kg, total height: 3,355 mm, table width: 700 mm, table length: 1,350 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5 h, coolant supply: 20 bar, distance table center to spindle nose: 130 mm, number of slots in tool magazine: 60, tool length: 250 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Equipment of Axon VMC 1270 Heidenhain TNC 640 Travel X/Y/Z – 1,200/700/700 mm 12,000 rpm Direct Drive Spindle 60-position chain magazine with double-arm gripper Heidenhain glass scales on X/Y/Z ICS (internal coolant supply) 20 bar Chip conveyor Air cooling internal/external Gbsdpfx Ajywy Hleciet Automatic workpiece measurement Renishaw OMP 40 Chip flushing Coolant spray gun Handwheel Air gun Status LED in machine housing

Condition: used, VERTICAL MACHINING CENTER "FAMUP" MOD. MC 120/60 X-axis travel: 1200 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Rapid traverse X-Y-Z = 40-40-40 m/min Spindle: 12,000 rpm, 22.5 kW ISO 40 - DIN Table size: 1380x600 mm Max. permissible load: 800 kg Tool magazine: Random, 30 positions Control: SELCA S4045 PDH Godexwclhspfx Aciobt

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Gbodozguh Hjpfx Aciot Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler Hurco MAX 5 control with WinMax software

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,631 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 410, total height: 2,700 mm, table load: 500 kg, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 13,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details. • Table: 1150 x 580 mm; T-slots 5x; T-slot size 18 mm • Spindle torque up to 110 Nm • Tooling: holder SK 40 DIN 69871; tool changer 22 stations (optional 30); max tool Ø 75 mm; max tool length 250 mm; tool change time approx. 5.2 s • Axis speeds: rapid X/Y 40,000 mm/min; rapid Z 30,000 mm/min; feed 1–12,000 mm/min; acceleration 6 m/s² • Accuracy: positioning ±0.005 mm; repeatability ±0.002 mm • Coolant system: tank capacity 450 l; pump capacity 70 / 140 l/min • Electrical: 400 V, 3-phase, 50 Hz; full load current 30 A; fuse protection 63 A; connected load approx. 20 kVA • Pneumatics: compressed air 6 bar; consumption approx. 80 l/min Gbedpfxey D N Ais Acist • Machine size/weight: dimensions 2830 x 2360 mm; transport with Chip conveyor weight approx. 4700 kg • Spindle operating time: 10,631 h Additional equipment • Chip conveyor (included) Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2015, operating hours: 6,600 h, 1 used machining centre Manufacturer: Spinner Model: VC 750 Year of manufacture: 2015 Control: Heidenhain iTNC 530 Approx. 6,600 spindle hours Gbsdeyngc Topfx Acijt Travel: X 760 mm Y 460 mm Z 460 mm Clamping table: 900 x 410 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Tool changer: 24 positions Workpiece weight: 350 kg Equipped with: Robot automation Heidenhain iTNC 530

Condition: excellent (used), Year of construction: 2010, Victor A26Y 2010 Fanuc 18i TB Gjdpfx Acjy Iwt Deisbt C-axis, Y-axis Subspindle Live tooling Barfeeder Video available!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Equipment: chip conveyor, CNC Vertical Machining Center DECKEL MAHO DMC 100 V For sale is a CNC-controlled vertical machining center, DECKEL MAHO DMC 100 V, with Heidenhain control. This machine is ideally suited for tool and die making, single-part production, and general CNC milling operations. Technical specifications: Manufacturer: DECKEL MAHO / DMG Type: DMC 100 V Control: Heidenhain Travel distances X/Y/Z: approx. 1000 / 800 / 500 mm Table size: approx. 1250 × 800 mm Max. table load: approx. 1200 kg Tool holder: SK40 / ISO40 Tool changer: 30/60 positions, depending on the model Spindle speed: up to approx. 15,000 rpm Equipment: Heidenhain CNC control Tool changer Gbodpjzh Hxmjfx Aciot SK40 tool holder Renishaw measuring probe Coolant system Chip conveyor Condition: Used Machine is complete Inspection under power possible by arrangement.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,100 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, table load: 1,100 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis Wele AA1165 was manufactured in 2014. A vertical CNC machining center featuring a Fanuc 0i-MC control, it offers X/Y/Z travels of 1,100 mm, 650 mm, and 600 mm respectively. Rapid feeds reach up to 24 m/min, with a spindle speed of 15,000 rpm. The table supports loads up to 1,100 Kg. Consider the opportunity to buy this Wele AA1165 vertical machining center. Contact us for more information about this machine. • Status: Excellent Gedpfsygmd Ujx Aciobt • Rapid feed (X/Y/Z): 24 / 24 / 20 m/min • Distance table–spindle nose: 125–725 mm • Table size: 1,300 x 650 mm • Tool turret: 24 positions • Notes: Spindle recently replaced Additional equipment • Chip evacuator (chip conveyor) Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Travel X/Y/Z: 1020/510/610 mm Speed: 8000 rpm Gjdpfx Aezwhk Asciobt Tool magazine for 24 tools, SK 40 DCF software

Condition: good (used), Year of construction: 2014, Spinner MCV 1000, year of manufacture 2014, Heidenhain TNC 620 control, travel X/Y/Z 1016/610/508 mm, 32-position tool changer, SK 40 spindle taper, prepared for internal coolant, table size 1200 x 500 mm, max. table load 800 kg, spindle speed up to 10,000 rpm, SK 40 spindle taper, chip conveyor, 4-jaw chuck Ø 250 mm with jaws, 3-jaw chuck Ø 315 mm with jaws. Gbodpfx Aeyaqn Djcijt