Used die-sinking EDMs with x-travel of 300-399mm for sale (42)

Condition: good (used), Details - Agie Mondo 50 Specifications X-axis (longitudinal) 497.8 mm Y-axis (transversal) 348 mm Z-axis (vertical) 348 mm Tank length 1018.5 mm Tank width 678.2 mm Tank height 398.8 mm Type CNC type AGIE FUTURA IV Table length 749.3 mm Table width 548.6 mm Maximum workpiece length 858.5 mm Maximum workpiece width 647.7 mm Maximum workpiece height 315 mm Maximum workpiece weight 499.1 kg Maximum generator current 64 A ----- Hnjdpfxozkcf Io Al Tep Dimensions (L x W x H) 1549.4 × 1955.8 × 2336.8 Weight 2131.1 kg *Factory-installed options - Plate 2* Option Ref. No. Purpose CAPACITANCE OPTION U05.629.7 Finer spark gap detection. Better surface finish. I/O MODULE ASSY. U05.759.2 Input/output module for automation. HEAT EXCHANGER U06.126.3 Water/oil heat exchanger to stabilize the dielectric fluid. Important. FILTER/REG/LUB U05.316.1 Air FRL unit for the cabinet. Standard. C-AXIS U06.831.8 4th rotary axis installed. Allows for indexing. TOOLCHANGER ASSY. U06.154.3 Automatic electrode changer. Major option, rare. PROGRAMMABLE FL. U06.756.7 Programmable flushing system. For deep machining.

Condition: used, Year of construction: 2002, Diesinking / EDM Hnjdpfx Aevtfn Iol Tsp Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 315 mm table size X: 576 mm table size Y: 400 mm max. workpiece weight: 500 kg C-axis quill chuck: EROWA

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 642544, travel distance X-axis: 350 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 2,600 mm, total width: 2,500 mm, total length: 4,000 mm, table width: 400 mm, table length: 450 mm, input voltage: 400 V, overall weight: 5,000 kg, input frequency: 50 Hz, controller manufacturer: CHARMILLES, controller model: SOLUTION, CHARMILLES ROBOFORM 350 SL Wire EDM machine - Rated current: 10.6 A - Table with three grooves The machine is equipped with an EROWA clamping system, as well as an EROWA Robot Compact automatic tool and electrode changing system, with a 44-position electrode changer. In addition, there are two workbenches with matching accessories such as clamping devices, a mounting plate, and various EROWA clamping systems and electrodes. Note: The item must be collected between September 8th and September 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck. Hedpfxjzldycj Al Tenp

Condition: excellent (used), Year of construction: 2011, operating hours: 26,882 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, Exeron S 310 MF Year of manufacture: 2011 Generator hours: 26882 Control system: Exowin 20 X, Y, Z travel: 310 x 270 x 270 mm C-axis 3R tool holder in the spindle Erowa chuck on the machine table with magnetic plate Generator: 64 A C-box for carbide and PKD tools 20-position tool changer Fire extinguishing system Chiller Aluminum clamping plate, Erowa Documentation Hjdpfxozguk Uj Al Tsnp Machine is connected and available for inspection.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Mitsubishi EA8 CNC die-sinking EDM machine Year of manufacture: 2010 Hnodpfxjyh E N Ae Al Tjp C-axis 4-position tool changer X, Y, Z: 300 x 250 x 250 mm Generator: 60 A Max. workpiece weight: 550 kg Max. electrode weight: 25 kg Chiller Hirschmann electrode holder in the spindle 24 x electrode holders 1 x Hirschmann electrode holder for milling Fire extinguishing system Magnet on the table Documentation and diskettes Machine is connected and ready for inspection

Condition: excellent (used), Year of construction: 2001, operating hours: 27,265 h, functionality: fully functional, Charmilles Roboform 35 with QCRI robot Year of manufacture: 2001 Operating hours: 27,265 X, Y, Z travel: 355 x 255 x 305 mm C-axis with Erowa chuck Erowa chuck on the table Erowa probe Magnet 3 x aluminium Erowa pallets 320 x 320 mm 35 x electrode holders 50 x 50 mm QCRI robot 4 x pallet positions on the table Hnodpfoyh E A Nox Al Tep 54 x electrode holder locations Documentation and diskettes Machine powered up for inspection

Condition: excellent (used), Table 600 x 450 mm Work piece 650 x 580 x 250 mm Hnedpfszi Nnmox Al Tjp Work piece weight max. 400 kg C-axis spindle speeds 60 rpm With pallets changer With tool changer Working head for 3 dimensional operation Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 2007, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 19,000 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, Charmilles Roboform 350 Year of manufacture: 2007 Die-sinking EDM machine with C-frame design Fixed table with lowering tank Travel distances (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable tank height: 100–325 mm Hnodpfx Aoyzzblel Tep Generator hours: 6,337 h

Condition: excellent (used), Year of construction: 2005, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, Control system: AGIEVISION Table dimensions: 600 x 450 mm Max. table load: 400 kg Max. travel ranges: 350 x 250 x 350 mm (X/Y/Z) 28-position tool magazine Hnodpfx Alszk Ibzs Tep C-axis integrated: 60 RPM CO2 extinguishing system Year of manufacture: 2005 Approx. 16,000 erosion hours The machine is fully functional, ready for operation, and connected.

Condition: used, TECHNICAL DETAILS - Strokes X x Y x Z : 350 x 250 x 350 [mm] - Max. part dimensions : 650 x 580 x 250 [mm] - Max. part weight : 400 [kg] - Machining intensity : 72 [A] - Tools magazine capacity : 28 Hnjdeuhcbispfx Al Tjp - Dielectric volume : 415 [l] - Machine floor space : 2.689 x 1.855 [mm] - Machine height : 2.593 [mm] - Machine weight : 3.000 [kg] - Welding hours : 39.554 [h] EQUIPMENT - CNC AGIEVISION with color screen LCD : 10,4 ['] - Deported electronic crank-handle - Axis C - Spindle chuck : EROWA - Automatic retractable tank - Integrated filtration : DAI 2

Condition: used, TECHNICAL DETAILS - part maxi dimensions : 650 x 420 [mm] Hjdpfx Asuhcbcjl Tsnp - part maxi thickness : 160 [mm] - maxi weight : 350 [kg] - strokes (X,Y,Z) : 320 x 220 x 180 [mm] - table traverse speed : 900 [mm/min] - wire unrolling speed : 0 - 10 [m/min] - wire tension : 80 to 2500 [gr] - wire guide : Ø 0,25 [mm] - tank capacity : 260 [l] - dimensions : 3 200 x 2 200 x 2 000 [mm] - weight : 1 900 [kg] EQUIPMENT - CNC FANUC 16W control - cooling unit - cooling tank with pump - automatic threading

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 1,900 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, tank capacity: 410 l, GF Machining Solutions FORM 200 Built in 2015 - Only 7,200 EDM hours! C-shaped die-sinking EDM machine Fixed table with lowerable tank Travel paths (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Including pneumatic chuck Erowa ITS 50 / 3R Systems / Hirschmann (optional) Max. electrode weight: 50 kg Max. inertia: 2000 kgcm² 4-position electrode changer AC FORM HMI user interface Operation via 15" LCD color screen with touchscreen Keyboard and handheld control unit also available Machine dimensions: 1900 x 1690 x 2398 mm Total weight: 2800 kg kg We will clean and service the machine upon receipt of the order. This is followed by an erosion test. We would be happy to commission the machine at your location and provide operating instructions. Optional: - Transport - Cooling unit - Dielectric Hnjdpfx Aswi Iuusl Top - Clamping device

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, Charmilles Roboform 35 Year of manufacture: 2000 C-frame design Hnodpoyyxbtefx Al Top Fixed table with lowering tank Travel distances: X=350 mm, Y=250 mm, Z=300 mm Max. workpiece size: X=780 mm, Y=400 mm, Z=300 mm Max. workpiece weight: 500 kg Max. electrode weight: 50 kg Distance table to chuck: 150 - 450 mm Working current 64 Ampere Isopulse generator Linear glass scales with 0.5 µm measuring resolution Includes pneumatic chuck Erowa ITS 50/3R Systems Machine weight (net): 2800 kg Machine dimensions (L x W x H): 1900 x 1690 x 2400 mm The machine was in operation with our customer until recently and is fully functional.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, total height: 2,372 mm, total width: 1,731 mm, total length: 1,000 mm, table width: 630 mm, quill stroke: 250 mm, table length: 400 mm, workpiece length (max.): 800 mm, workpiece width (max.): 500 mm, workpiece height (max.): 265 mm, GF AgieCharmilles FORM 20 Year of manufacture: 2017 AC-FORM HMI control Travel distances: X=350 mm, Y=250 mm, Z=250 mm Max. workpiece size: X=800 mm, Y=500 mm, Z=265 mm Max. workpiece weight: 200 kg Max. electrode weight: 50 kg Distance table – chuck: 230 – 480 mm ISPG generator – working current 80 amps Best achievable surface finish Ra 0.1 µm Linear glass scales with 0.05 µm measuring resolution Incl. pneumatic chuck Erowa ITS 50 Incl. 4-position electrode changer in the magazine Hnjdpfxoxf Dvqs Al Tep Machine weight (net): 2,000 kg Machine dimensions (L x W x H): 1000 x 1731 x 2372 mm The machine will be cleaned, serviced, and subsequently tested upon receipt of order. We are also happy to commission the machine for you.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, quill stroke: 250 mm, AGIE Spirit 2 Year of manufacture: 2005 APG FORM Control Travel paths: X = 300 mm, Y = 250 mm, Z = 250 mm Max. workpiece size: X = 500 mm, Y = 400 mm, Z = 185 mm Max. workpiece weight: 200 kg Max. electrode weight: 25 kg Distance table – chuck: 190 – 440 mm AGIE APG Spirit Generator – Working current 80 amperes Best achievable surface finish Ra 0.2 µm Including pneumatic chuck Erowa ITS 50 or 3R (at your choice) Hedpfjxt N Hksx Al Tonp Including 4-position electrode changer in the magazine Net machine weight: 1,280 kg Machine dimensions (L x W x H): 1850 x 2100 x 2360 mm The machine will be cleaned, serviced, and subsequently tested after receipt of order. We are happy to commission the machine for you as well.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, total height: 2,372 mm, total width: 1,731 mm, total length: 1,000 mm, table width: 630 mm, quill stroke: 250 mm, table length: 400 mm, workpiece length (max.): 800 mm, workpiece width (max.): 500 mm, workpiece height (max.): 265 mm, GF AgieCharmilles FORM 20 Year of manufacture: 2008 Travel paths: X=350 mm, Y=250 mm, Z=250 mm Max. workpiece size: X=800 mm, Y=500 mm, Z=265 mm Max. workpiece weight: 200 kg Max. electrode weight: 50 kg Distance table – chuck: 230 - 480 mm APG FORM Generator – working current: 72 Amperes Best achievable surface finish: Ra 0.2 µm Including pneumatic chuck Erowa ITS 50 Including 4-position electrode changer in magazine Machine weight (net): 2000 kg Machine dimensions (L x W x H): 1300 x 1850 x 2500 mm Hnedpfx Aoy Eml Rjl Tsp The machine will be cleaned, serviced, and subsequently tested after your order is received. We are happy to commission the machine for you as well.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 1,900 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, tank capacity: 410 l, Charmilles Roboform 350 Year of manufacture: 2007 C-frame sinker EDM machine Fixed table with lowering tank Travel (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Including pneumatic chuck Erowa ITS 50 / 3R Systems / Hirschmann (choice of one) Maximum electrode weight: 50 kg Without electrode changer Charmilles DPControl operating interface Operation via 12" LCD color touchscreen Keyboard and hand pendant also available Machine dimensions: 1900 x 1690 x 2522 mm Total weight: 2800 kg The machine will be cleaned and serviced by us upon receipt of order. Afterwards, an EDM test will be performed. We are happy to commission the machine at your site and provide operator training. Optional: - Transport - Cooling unit - Dielectric fluid Hnjdpfx Aeyu N Skol Tsp - Clamping devices

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: AGIE, number of axes: 3, This 3-axis AGIE Hyperspark 2 Exact with Erowa was manufactured in 2005. It features an X-axis travel of 350 mm, Y-axis travel of 250 mm, and Z-axis travel of 250 mm. The machine is equipped with AGIE VISION 4 Software and includes an EROWA ROBOT MULTI with 60 ITS 148 places and 240 ITS 50 magazine places. If you are looking to get high-quality die-sinking EDM capabilities, consider the AGIE Hyperspark 2 Exact machine we have for sale. Contact us for further details. • EROWA ROBOT MULTI with 60 ITS 148 Places and 240 ITS 50 Magazine Places Hodpsy S A Dcefx Al Tenp

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Hjdpfxepy Erro Al Tonp

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,290 mm, overall weight: 3,200 kg, controller manufacturer: MAKINO, controller model: MGF, number of axes: 3, This 3-axis Makino EDNC 30 die-sinking EDM machine was manufactured in 1998. It features travel paths of 300mm in X, 250mm in Y, and 250mm in Z, a table size of 500 × 350 mm, and can handle a maximum workpiece weight of 500 kg. Consider the opportunity to buy this Makino EDNC 30 die-sinking EDM machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Total area: width 3000 mm, y 2800 mm • Power: 12 kva, 400 v, 12 a • Table size: 500 mm x 350 mm • Tool positions: 8 • Polishing edm is possible with this machine. Hjdpsx U U Hujfx Al Tenp Extra Information Polishing EDM is possible with this machineFaulty circuit board (machine won't start up) Dimensions Machine Depth 2000 mm

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, overall weight: 2,500 kg, number of axes: 3, This 3-axis CHARMILLES ROBOFORM 35P die-sinking EDM machine was manufactured in 2002. It features a travel range of 350 mm in the X-axis, 250 mm in the Y-axis, and 300 mm in the Z-axis, with a maximum workpiece weight of 500 kg. The machine is equipped with a 32-position rotary tool changer and a high-speed Z-axis for enhanced performance. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES ROBOFORM 35P machine we have for sale. Contact us for further details. • Table dimensions: 400 x 500 mm • Maximum workpiece weight: 500 kg • Dielectric capacity: 400 l • Rotational axis: C-axis • Z-axis type: High-speed Z-axis • Tooling interface: Combi chuck • Tool changer: 32-position rotary changer • Electrical: 380 V, 3 Ph, 50 Hz, 5 kVA, 5 A • Safety: Integrated fire extinguishing system Hnsdpfx Aljy Idtkj Tep Additional equipment • Eckert cooling unit • Measuring probe (touch probe)

Condition: good (used), Year of construction: 1980, Travel X/Y/Z 350/250/300 mm, table size 480x360 mm, table - quill 450 mm, max. power 40 A; 4,8 kw; DRO Heidenhain, wire control system 3R, working hours 21383 h Hnodpfx Aeiv H Egel Tep

Condition: used, table length 400 mm table width 300 mm Hedpfxevwgq Sj Al Tenp x-travel 300 mm y-travel 250 mm z-travel 250 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm The machine is supplied with a wide range of accessories

Condition: excellent (used), Year of construction: 2001, Charmilles Roboform 2400 Year of manufacture: 2001 X-320 mm, Y-220 mm, Z-320 mm Max. workpiece dimensions: 880 mm x 550 mm x 225 mm Table: 560 mm x 320 mm Hedpfx Aljy Ncyls Tsnp Weight: 3,500 kg Including EROWA tooling Excellent condition!

Condition: excellent (used), functionality: fully functional, Despite its age, the machine is in like-new condition!!! Hnedpsykq U Eefx Al Tsp For sale is a powerful wire erosion machine, model 600 ERCOCOM II, from Dieter Hansen, equipped with a Heidenhain control system. The machine is equipped with high-quality components and is particularly suitable for precise applications in tool and mold making. Features & Highlights: • Adaptimat with gap process monitoring – specifically for graphite machining to avoid arcing (New price alone approx. €13,000) • 16-position electrode changer for automated series machining • Erowa clamping system for precise and fast setup • 3D probe with carbide ball for accurate measurement • Cooling system (7 kW) • Integrated extraction system for fumes Some barrels with dielectric fluid are included! An inspection and functional test are possible by appointment. If you are interested, we look forward to hearing from you. The price includes packaging on the original heavy-duty pallet and loading onto your truck using a forklift.