Used horizontal band saws - manual - cutting range 221-299mm for sale (78)

Condition: used, Working mode: semiautomatic Machine type: Horizontal bandsaw Hnodpfoydp Udex Al Tjp Cut: Mitre cut Mitre cuts range: -60° – 60° Drive: 4 kW, 3×400 V/50 Hz Saw band speed: 20 – 120 m/min. Saw band dimensions: 6 100×41×1,3 mm Material loading height: 770 mm Shortest remnant length: 40 mm Smallest sawing diameter: Ø 5 mm

Condition: used, Year of construction: 1992, cutting diameter 260 mm saw band length 3890 mm cutting width 340 mm cutting speed Stufenlos m/min total power requirement 2,4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 1,4 x 2,0 m Vice can be adjusted for angle cutting. Hodpfxju Rt Hdj Al Tenp

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Hnodpog U Uv Refx Al Tsp Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available -

Condition: new, 1 brand new horizontal bandsaw machine with a swiveling frame and double miter capability (R/L) Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm Hedpsfk Ew Esfx Al Tjnp -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 760 mm Motor power, main drive 1.0 - 1.3 kW, 400 V, 50 Hz Motor power, coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Double miter capability through a swiveling frame o The material to be cut remains straight in space! o No need to turn the material for miter cuts! o High efficiency with enormous time savings! • Adjustable precision stops 0°, 45° and 60° on the left and 45° on the right • Interchangeable work table • Quick-release vise, can be shifted to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is regulated steplessly by a hydraulic cycle • Coolant system • Chip brush • Swiveling control panel • Electric safety switch for blade tension and saw blade guard • Automatic shutdown at the end of the cut • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: ready for operation (used), Year of construction: 1982, Band saw with miter cutting device, manufacturer: HESKA, type: HSE 260, year of manufacture: 1982. The machine has been partially overhauled and includes a support stand, machine documentation, and a coolant system. Hedpfx Alezictco Tsnp Sawing capacity for round stock: max. 260 mm.

Condition: new, Technical data: Cutting range: round 0°: 255 mm square 0°: 200 x 200 mm flat 0°: 320 x 200 mm round 45°: 195 mm square 45°: 195 x 195 mm flat 45°: 195 mm round 60°: 125 mm square 60°: 125 x 125 mm flat 60°: 130 x 120 mm round -45°: 200 mm square -45°: 170 x 170 mm flat -45°: 200 x 170 mm Cutting speeds: 35 / 70 m/min Saw band: 2750 x 27 x 0.9 mm Working height approx.: 930 mm Coolant pump: 100 W Saw motor: 1.5 kW Connection: 400 V Dimensions L x W x H, approx.: 2000 x 1250 x 1900 mm Weight, approx.: 350 kg Features: - Double miter saw with a swiveling saw arm from -45° on the left to +60° on the right - Ideal for cutting tubes, profile material, and solid material made of stainless steel, iron, etc. in commercial applications - Generously sized cast saw arm for vibration-free operation - With 2 saw band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vise for easy and fast workpiece clamping - Precise, adjustable saw band guide for optimal cutting results Hsded R Sipopfx Al Tsnp - CE/IEC, German documentation and German service Scope of supply: - Saw band - Material stop - Manometer (band tension) - Saw band carbide guides - Vise with quick-release mechanism - Integrated coolant system - Hydraulic arm lowering - Motor protection switch - Automatic end stop - Base frame

Condition: good (used), Year of construction: 2017, – 2 speeds – Double miter – Saw pressure hydraulically adjustable – Quick clamping device – Cooling – Automatic shut-off Hjdpfxjzggd He Al Tjnp – Emergency stop – 400V

Condition: used, Year of construction: 1970, cutting diameter 250 mm saw band length 3660 mm cutting width 1,3 mm clamping range Länge 450 mm clamping range Höhe 250 mm cutting speed 20 - 70 m/min cutting capacity stufenlos mitter cutting - all-position 45 ° voltage 380 V frequency 50 Hz power capacity 0,55 kW weight of the machine ca. 0,7 t Hedpfx Aexc Nwuel Tenp dimensions of the machine ca. 1,5 x 1,0 x 1,6 m coolant device

Condition: used, Year of construction: 1994, Semi-automatic horizontal bandsaw for solid material and profiles Cutting capacity up to approx. Ø 260 mm Hnedjwbfhcspfx Al Tjp Robust cast construction Manual feed and hydraulic cutting cycle Swivel head for angular cuts Integrated coolant system Ideal for workshops and industrial use

Condition: good (used), functionality: fully functional, Cutting speed, continuously variable: 20-70 m/min Saw blade: 3660 x 27 x 0.9 mm Feed length: 400 mm Cutting range – round / square: 250 / 250 mm Hnsdpfxszgdbio Al Tep Cutting range – rectangular: 300 x 260 mm

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V power capacity 1,5 kW dimensions of saw-band 2480 x 27 x 0,9 mm mitter cutting 0 - 60 ° Hsdpfx Aoy Ty Dpsl Tjnp cutting speed 20 - 90 m/min weight of the machine ca. 185 kg dimensions of the machine ca. 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device

Condition: used, functionality: fully functional, SEGATRICE MANUALE usata, BIANCO 370 M.REVISIONATA e RIVERNICIATA. Hnsdpfxszhupto Al Tjp

Condition: used, functionality: fully functional, SEGATRICE MANUALE usata BIANCO 370. Hodpfx Ajzhupasl Tjnp

Condition: new, MACC SPECIAL 411 CSO band saw with gravity feed New, CE compliant The key features of the machine (blade support rigidity, flywheel sizing, band guide, band tensioning) have been the subject of careful study in order to prevent band stress, increase its lifespan, improve cutting linearity, and reduce cutting time. – Band saw with arc-cut, adjustable by a hydraulic circuit, manual bar feed and vice closure, manual head return – Vertical rotation on a pin with adjustable tapered roller bearings, free of play – Band drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear – Appropriately sized flywheels – Robust band guides made with sealed guide bearings and adjustable carbide inserts – Band tension obtained via an electromechanical device with a microswitch-controlled blade rotation – Vice with quick-feed device Hnjdpfx Aeficb Tsl Top – Safety device on the flywheel cover, on the control handle, and on the blade – Hydraulic cylinder for controlled descent – Cutting thickness 1.2 mm – Cutting range 45° left, 60° right – Adjustable stop for cuts of the same size – Low-voltage 24 V system – 0.06 kW electric pump for band cooling – Stand with drawer for chip collection and removable tank for coolant – Machine designed for movement with a pallet truck

Condition: new, Brand new machine No. 1 available for immediate delivery!! “CE” certified Made in Italy Cutting capacity: 0° = round tube mm 230 – square tube mm 220 – rectangular tube mm 170 x 300 45° = round tube mm 200 – square tube mm 180 – rectangular tube mm 180 x 230 60° = round tube mm 130 – square tube mm 120 – rectangular tube mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on a pin with adjustable tapered roller bearings, ensuring no play. Belt drive with a two-speed motor and a special gearbox with bronze gear and hardened and ground worm gear. Flywheels appropriately sized. Robust belt guides made with sealed guide bearings and adjustable Widia pads. Belt tension obtained via an electromechanical device with a microswitch-controlled blade rotation. Vise with quick-locking device. Safety device on the flywheel cover, control knob, and blade. Cutting thickness 1.2 mm Cutting range from 0 to 60° to the right Adjustable stop for cuts of the same size Low-voltage 24 V system 0.06 kW electric pump for belt cooling The fundamental characteristics of the machine (blade support rigidity, flywheel sizing, belt guides, belt tensioning) have been the subject of careful study to prevent belt yielding, increase its lifespan, improve linearity, and reduce cutting time. Hnedpfx Aefibfgol Tep

Condition: new, Bandsaw machine Manufacturer: METALLKRAFT Model: BMBS 230 x 280 H-DG Art. No.: 3680013 Condition: New machine Cutting capacity (round): 230 mm Cutting speed: 35/70 m/min Standard equipment: Hedpjcuntzofx Al Tsnp - Horizontal clamping device - Length stop (600 mm) - Monitoring of saw blade tension, electromechanical - Chip removal brush - Coolant system - Operating manual

Condition: new, Year of construction: 2026, machine/vehicle number: MTP-BS260G-2026, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 260 mm, control type: manual, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 72 rpm, rotational speed (min.): 36 rpm, total height: 1,900 mm, total length: 1,950 mm, total width: 750 mm, overall weight: 230 kg, Equipment: CE marking, documentation/manual, motor brake, rotational speed infinitely variable, OFFER OF THE WEEK – 5% DISCOUNT! # MTP BS260G METAL BAND SAW ### Professional Horizontal Metal Band Saw with 0–60° Swivel Cutting Head Hnjdpfoyr Ndhox Al Tjp The brand-new MTP BS260G Metal Band Saw has been designed for precise cutting of carbon steel, stainless steel, acid-resistant steel, alloy steel, and non-ferrous metals. Thanks to its robust construction, hydraulic downfeed system, and high-quality blade guidance, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, maintenance departments, and engineering companies. The swivel saw head allows precise cutting at any angle from 0° to 60°, providing excellent flexibility for a wide range of applications. The hydraulic downfeed system ensures smooth, accurate, and repeatable cutting performance. ## Standard Equipment • Integrated coolant system • Hydraulic cylinder with infinitely adjustable downfeed • Manual mechanical blade tensioning system • Carbide blade guides with precision bearings • Swivel cutting head (0°–60°) • Material clamping vice • Infinitely variable feed adjustment • Automatic blade drive shut-off after completing the cut • Technical documentation and operating manual • CE Declaration of Conformity ## Key Features • Precise mitre cutting from 0° to 60° • Heavy-duty cast iron saw frame for maximum rigidity • Two blade speeds: 36 and 72 m/min • High-precision carbide blade guidance for extended blade life • Hydraulic automatic downfeed system • Integrated coolant system for improved blade durability • Excellent cutting accuracy and surface finish • Ideal for cutting tubes, pipes, profiles, bars, and solid steel sections ## Technical Specifications • Machine type: Horizontal metal band saw • Cutting angle range: 0°–60° • Blade dimensions: 2455 × 27 × 0.9 mm • Blade speeds: 36 / 72 m/min • Feed rate: 0–50 m/min (infinitely variable) • Blade tensioning: Manual mechanical • Downfeed adjustment: Hydraulic, infinitely variable • Vice base height: 1010 mm • Main motor power: 1.1 kW • Power supply: 400 V / 50 Hz / 3-phase • Machine dimensions: 1950 × 750 × 1900 mm • Machine weight: 230 kg ## Safety The machine is equipped with blade guards, safety switches, and an automatic motor shut-off system that stops operation after the cutting cycle is completed or when a guard is opened. An additional safety feature automatically switches off the machine if the saw blade breaks. ## Technical Support We provide professional technical advice, warranty and after-sales service, as well as assistance in selecting the appropriate saw blades and cutting parameters. Transport can be arranged throughout Europe and worldwide. Brand-new machine supplied with a 24-month manufacturer's warranty, fully operational and ready for immediate use.

Condition: used, Year of construction: 2000, gebraucht 2000 6253 prompt, Zwischenverkauf v 1900 € 1 Schwenkrahmen 2480 x 0,9 x 27 mm 45 / 90 m/min 225 mm 180 x 245 mm rund 100 mm, 100 x 100 mm rund 160 mm, 160 x 160 mm 935 mm 1.1 kW 1500 mm Hodpfxjynmy Ej Al Tonp 700 mm 1400 mm 225 kg Downfeed with damper cylinder and manual valve Coolant equipment Vice with fast clamping lever Roller table 2000 mm with manual gauge 3 pcs. spare bands Operating manual with EC conformity declaration OPTIONS: Further roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2023, gebraucht 2023 6242 prompt, Zwischenverkauf v Italien 5400 € 1 Schwenkrahmen 2450x27x0,9 mm 35/70 m/min 220 mm 220 mm 260x140 mm rund 160 mm, quadrat 155 rund 95 mm, quadrat 95 mm 965 mm 1200 mm 1100 mm 1860 mm 240 kg demo machine / mint condition net price (price for new machine € 6.730,00) manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment OPTIONS: Roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE Hedewiqpzspfx Al Tonp We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, Year of construction: 2025, – 2 speeds – Double mitre cut – Hydraulically adjustable sawing pressure – Quick-clamping device Hnjdpfxsyhh Tae Al Top – Cooling – Automatic shut-off – Emergency stop – Documentation – 400V

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min Hnedpfexaarkjx Al Tjp saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mm Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, Year of construction: 2025, cutting diameter 280 mm saw band length 3660 x 27 mm cutting width 0,9 mm capacity 90 degrees: square 270 x 270 mm capacity 90 degrees: flat 210 x 330 mm total power requirement 1,5 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1350 x 2250 x 1860 mm The GERD WOLFF KMS 280 is a precision servo-driven bandsaw designed for Hodeyk Ii Hjpfx Al Tonp consistently accurate cutting.

Condition: new, Model Name Shark 282 CCS Hodpjgvkbcefx Al Tjnp

Condition: new, Model Name Hnjdpjgvkchofx Al Tsp Shark 281 CCS

Condition: new, Year of construction: 2025, cutting diameter 240 mm saw band length 2910 x 27 x 0,9 mm cutting width 310 mm table height 900 mm 35 + 75 m/min 1,1/1,8 kW 470 kg 800 x 1720 x 1450 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV Hnsdpewa Ui Tjfx Al Top - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system