Swivel Bow Bandsaw

Bomar 620-460

Condition: good (used), Year of construction: 2012, Used Bomar bandsaw with dual column system Model: Individual 620.460 DGH Capacity: 620 x 460 mm Gbsdey Rktiopfx Aaxjl Double mitre Year of manufacture: 2012 Includes 6 meter infeed conveyor + 6 meter outfeed roller conveyor with measuring system

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Gedsuwrv Dspfx Aaxjbl

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm Gsdpfjv Tpxqox Aaxjbl -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: used, Year of construction: 2008, machine/vehicle number: MBxx-25, DEMAG KBK 2 - crane sky crane runway indoor crane Please ask your crane runway about your dimensions. Payload / lifting capacity from 80 125 250 500 to 1000 Kg Technical data of the system: Profile Demag KBK 1, 2L, 2 rails Also available as a monorail with curved sections, turntables and points! Mounting height variable The system can be delivered complete, including accessories such as: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. All sizes of chain hoists are optionally available Various facilities available. Very good used condition Rails available in yellow or red! Gedpfx Ajwq A Avjaxobl Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg Gedpfx Aasul Svlexjbl The machine is fully refurbished and tested.

Condition: used, Year of construction: 2017, operating hours: 56,681 h, laser power: 4 W, 2017 Laser cutting machine with changing table and pipe cutting function. DURMA HD-FL 3015 BH / IPG 4kW – Manufacturer: DURMA – Model: HD-FL 3015 III BH-IPG 4kW – Year of manufacture: 2017 – Laser source: IPG – Control system: SIEMENS + CAD software + nesting software – Operating hours: 56,681 h Technical data: – Working area: 3000 x 1500 mm – Pipe cutting diameter: Ø 12 – 400 mm – Laser power: 4000 W (fiber laser) Maximum thickness parameters of cutting materials: – Black steel: up to 12 mm – Stainless steel: up to 10 mm – Aluminum: up to 10 mm – Copper: up to 4 mm – Brass: up to 6 mm Additional functions: – IPG fiber laser resonator – Water cooling system for laser source and cutting head – Extraction and filtration system under and above the laser Gedpfxjvyhczo Aaxjbl – Double table system – Pipe laser with 4-point chuck and can cut up to 6 m – CAD software – Nesting software – Pipe laser software – Very good condition, annual service performed 2024.12. If you have any more questions, we will be happy to answer.

Condition: new, Year of construction: 2022, IN STOCK -- Semi-automatic metal bandsaw machine with high cutting precision! With this machine, miter cuts up to 45° on the left and up to 30° on the right are possible (swivel range 45° on the left and 60° on the right) Technical data: ● Cutting range: - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm - 45° right round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0,9-1,5 kW / 400 V / 50 Hz ● Band saw speed: 35 / 70 m/min Gbjdpemf T Hpefx Aaxel ● Saw blade dimensions: 3270 x 27 x 0,9 mm Basic equipment: ● Hydraulic control of the saw frame ● Automatic height limitation of the saw frame via contact sensors ● Easy and convenient clamping of the material via a hydraulic short-stroke cylinder ● Hydraulic cutting pressure regulation ● Simple, continuous adjustment of the saw for miter cuts ● Electrical blade tension monitoring with saw blade breakage control

Condition: new, Stempel von Wila typ für Trumpf/Safan Darley und alle Abkantpressen verwenden das Wila-Klemmensystem Gbjdpfxjr Akrao Aaxsl

Condition: new, Year of construction: 2026, Robotic gantry system for metal sheet and profile cutting 3D robotic gantry system for plasma and oxy-fuel cutting has double-side drive, precise positioning system by racks and pinions on the 3 linear axes with exceptional speed and dynamics. Zero-backlash on the 3 rotational axes allow 4-side machine processing of profiles and round tubes. Precise gearboxes with minimum backlash, dynamical engagement of the motors to the racks, and rigid guide system allows smooth movement, excellent cut quality of corners and small holes. The gantry system has a cantilevered part crossbeam, which allows profile cutting in a cabin especially designed for this purpose. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 1500 mm Beams and profiles types: T, L, H, U, rectangular tube, round tube Maximum dimensions of beams: Width up to 1200mm Rectangular tubes: Cross-section up to 600x600mm KEY FEATURES ▪ Stable metal construction with precise linear guides and servo-drives with racks and pinions on all axes; ▪ High dynamics, on all X, Y and Z axes: up to 30 m / min speed and acceleration up to 3 m / s²; ▪ 3D control on seven axes allows for a higher level of CNC programming; ▪ Maximum use of machine resources, thanks to the concept of combined processing of sheets and profiles - the ability to 100% load the machine when switching between sheets and profiles, without downtime for loading sheets and profiles and unloading cut parts ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request Gedpfjh I Nw Dex Aaxjbl ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm TONNAGE: 60 ton THROAT DEPTH: 410 mm DISTANCE BETWEEN UPRIGHTS: 1700 mm UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 Godpsxn U Rqofx Aaxsbl WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm