Used 3D Printers for sale (178)

Condition: not inspected (used), Dear Sir or Madam We hereby offer you the following device for sale: Keyence Agilista 3200W 3D printer. The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Please inform us of your binding bid by 07.12.2025 at 10 am. Gsdpfx Ajwktwksayjkf You will be informed of the outcome of the auction within 72 hours of the end of the auction.

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, Used ProJet SD6000 3D printing machine using stereolithographic technology. Gkedpetvfwkefx Aayef The machine has had extremely low hours usage during its life so far, having been installed and minimally utilised from time to time for research projects at the University of Sheffield AMRC research department known as the “Factory of the Future”. Serial # 10311178101 Year 2014 MACHINE CONSTRUCTION & FEATURES The ProJet 6000 HD SLA 3D provides SLA quality in a compact footprint and is a printer which puts the unmatched capabilities of Stereolithography 3D printing technology, fine-tuned for cost-efficiency and unrivalled material availability, into a smaller footprint. 3D Printed SLA parts with unrivalled accuracy and surface finish. High Flexibility 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. • Two build platforms • One material delivery cart • Projet TM6000 Print tray • Washing Unit • Curing Unit 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. Print modes: High Definition, Ultra High Definition Resolution: (HD) 0.125mm, 0.125mm layer. (Ultra-high definition): 0.125mm, 0.10mm layer. Net construction volume: (short) 250 mm x 250 mm x 50 mm (medium) 250 mm x 250 mm x 125 mm, (tall) 250 mm x 250 mm x 250 mm. Accuracy: 0.025 – 0.05 mm per 25.4 mm of part dimension. BENEFITS: Stereolithography technology (SLA) Max build envelope capacity (W x D x H): 250 x 250 x 250 mm (10 x 10 x 10 in). Highest precision and accuracy Exchangeable Material Delivery Modules (MDMs). Utilizing two laser spot sizes per layer – no compromise between speed or feature detail. True line drawing in X and Y to accurately define curves. Industry-leading 3D Sprint software for file preparation and production. Cloud connectivity for predictive and prompt service with 3D Connect.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 211 h, General Data Measurements width 610 mm Measurements depth 650 mm Measurements height 1200 mm Additional Equipment Inert Gas Control System: Yes Gjdpfx Aox D Ehreayjkf This SINTERIT lisa x was manufactured in 2023. A compact and efficient plastic 3D printer, it offers advanced printing capabilities suitable for various applications. Ideal for small to medium-sized projects requiring precision and reliability. Consider the opportunity to buy this SINTERIT lisa x plastic 3D printer. Contact us for more information. Application Types 3D Printing

Condition: like new (used), functionality: fully functional, Year of construction: 2014, total length: 1,100 mm, total height: 1,510 mm, total width: 850 mm, overall weight: 160 kg, We are offering an unpacking and sieving station as well as an unused drum mixing station from EOS GmbH. This mixing station is ideally designed for use in combination with wide-neck drums. It enables the efficient blending of sieved used powder with virgin powder over a defined period. The prepared powder mix can then be used in EOS Formiga P100 or P110 systems. The unpacking and preparation station consists of: • an unpacking area • a sieving unit for used powder • a feed for virgin powder • and a scale for the preparation of plastic powder. Godpfxjxzpw Sj Aayokf After removal from the machine, the cooled exchange frame is inserted into the unpacking and preparation station. By gradually raising the build platform using a foot pedal, the powder bed with components is pushed out of the exchange frame. The sintered parts are manually unpacked from the powder bed. Reusable used powder from the powder bed is pushed onto the adjacent perforated plate and falls through a hose into a sieve bowl. The used powder is sieved into a powder container placed on a scale beneath the sieving unit. The scale enables precise measurement of the quantity of recycled powder. Then, by turning the hand crank, a pre-determined quantity of virgin powder is fed into the powder container with the recycled powder. The prepared plastic powder then needs to be mixed in the mixing station before it can be used again in the build process. Mixing station We are offering an unused drum mixing station from EOS GmbH. In the mixing station, virgin and recycled powder, filled into powder containers by the unpacking and preparation station, are mixed. A powder container is rolled or placed onto the mixing station and then rotated continuously for a pre-set period. After the time has elapsed, the mixing station stops and the powder container can be removed.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 7,508 h, 💡 Unique Opportunity – Showroom Machine from Official Dealer This machine comes from the demonstration showroom of a former official Markforged and DWS dealer who operated in the Italian market until 2025. It was used exclusively for demonstration purposes, maintained in excellent condition, and has very few operating hours. Now available through 3D Machineries Srl, this represents a rare opportunity to purchase an almost new industrial 3D printer, at a fraction of its original cost – with immediate availability and full transparency on provenance and usage. -----LISTING DESCRIPTION----- Markforged – Complete Metal X System for Metal 3D Printing (Printer + Wash + Sintering Furnace + Accessories) 💰 New value over €200,000 For sale: complete Markforged Metal X system for metal 3D printing, including all necessary components for in-house metal part production using the bound metal printing process (FFF technology + debinding + sintering). ✅ The system comes from a showroom and is in excellent condition. Sale of individual components also considered. The package includes: 🔹 Markforged Metal X 3D Printer 🔹 Markforged Wash-1 – Debinding unit for binder removal 🔹 Markforged Sinter-2 – Industrial sintering furnace 🔹 Argon gas control panel – with reducers and quick couplings 🔹 Original Markforged case – with spare build plates 🔹 Mobile wheels for machine handling 🔹 Isolation transformer Key technical data: Printer model: Metal X (F-PR-5101) Sintering furnace model: Sinter-2 (F-SR-0002) Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Furnace power supply: 200–240 V AC 30+PE | 347–415 V AC 30+N+PE / 30 A Certifications: CE, FCC, UL, RCM, UKCA Assembled in the USA ✅ The Metal X system enables printing of stainless steel components (17-4 PH, 316L), pure copper, Inconel, and tool steel ✅ Ideal for machine shops, R&D departments, prototyping centers, and companies in the aerospace and automotive sectors Gkodpfx Aaowzmgteyof 💡 The new value of the complete package is over €200,000. 📦 Option for separate sale: printer, wash unit, sintering furnace, accessories. 📩 Contact us to receive a detailed price list, images, videos, usage hours or to schedule an inspection.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 720 h, total length: 700 mm, total height: 1,000 mm, total width: 760 mm, type of input current: AC, overall weight: 110 kg, input voltage: 230 V, The printer is in good optical and functional condition and ready for demonstration. Gedpfjxz N Rfjx Aayekf The printer can process not only PLA, PETG, ASA, PA, etc., but also fiber-reinforced filaments (1.75mm). The IDEX printer is equipped with 2x 0.4 mm nozzles and can be accessed via WiFi, LAN, and USB. The printer is fitted with Klipper and can process models generated by the MINGDA-ORCASLICER. Due to over 700 operating hours, the 400x400x400 mm printer is being sold as a spare parts donor only, without any guarantee, even though it is in working condition. Viewing and test printing on site are welcome. The printer must be picked up in person in Genthin (39307) and is offered without packaging. Please refer to the relevant online resources for further technical data regarding this model. Packaging and transport must be organized by the buyer. Collection in person only!

Condition: like new (used), Year of construction: 2016, For Sale: EOS P 396 – Guaranteed Working Condition This EOS P 396 was purchased from EOS in 2022 by the previous owner and is now available for resale in fully guaranteed working condition. Before the sale, the machine is thoroughly inspected and revised by our experienced technicians to ensure top performance. The package includes: • 2 build frames • Hydac water cooler Additional accessories are available upon request. We offer transport in the original EOS packaging and provide professional installation services to ensure a seamless experience. Warranty and maintenance plans are available to suit your needs. For more information or specific requests, please don’t hesitate to contact us. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS SLS machines and unparalleled support. With our team of ex-EOS technicians, we are the only provider in the market offering a complete solution for used EOS equipment—including installation, maintenance, repairs, upgrades, and consumables. What sets us apart: • Guaranteed reliability: Every machine is inspected and revised before delivery. • End-to-end support: From transport and installation to tailored maintenance plans, we’ve got you covered. • Expertise: With years of experience in the SLS industry, we ensure that your machine runs at its best. • Exclusive offerings: Unique materials, accessories, and service plans designed specifically for EOS users. Gksdpfx Aaotp Up Eoyjf Choose IM3D for unmatched expertise, value, and service. Feel free to reach out to learn more about how we can support your SLS production needs!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SP0119240003037, Year of construction: 2019, input voltage: 240 V, Equipment: CE marking, Bound Metal Deposition™ metal 3D printing system composed of: - printer - debinder - sintering furnace - frequency converter for 60Hz furnace power supply. System in perfect condition, used for R&D in a climate-controlled environment. Printer equipped with 2 nozzles (0.40mm diameter) and one high-definition nozzle (0.25mm diameter). Furnace equipped with a technical gas supply system from an external installation. Gkodpfx Aaexlcldsyjf Set of original replacement parts for furnace (ceramic setters, graphite retort shelves, gaskets, filters, vacuum pump oil). Firmware updated to the latest release throughout the system. Material cartridges included: 1x AISI 316L 1x 17-4PH 1x ceramic support

Condition: excellent (used), functionality: fully functional, machine/vehicle number: F170, Year of construction: 2018, operating hours: 2,732 h, Rarely used fully functional 3D Printer Washing unit for cleaning of soluable support material included Gkjdpfx Aoxhbxzoayef

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, total length: 406 mm, total height: 1,117 mm, total width: 406 mm, type of input current: AC, overall weight: 52 kg, input voltage: 220 V, input current: 5 A, input frequency: 50 Hz, positioning accuracy: 0.093 mm, feed length X-axis: 180 mm, feed length Y-axis: 101 mm, feed length Z-axis: 330 mm, EnvisionTEC Envision One cDLM XL – High-Precision 3D Printer (Demonstration Unit, Like New) For sale is an EnvisionTEC Envision One cDLM XL 3D printer—a professional high-end system for precise and rapid production of prototypes, functional parts, dental models, and small series. Condition: - Demonstration unit, very lightly used - Technically and visually like new - Clean, well-maintained, and ready for immediate use Technical Data: - Model: Envision One cDLM XL - Technology: Continuous Digital Light Manufacturing (cDLM) / DLP - Build Volume: 180 × 101 × 330 mm (X × Y × Z) Gkodpfxjxzdp Ao Aaysf - Native XY Resolution: 93 μm - Enhanced XY Resolution: up to approx. 60 μm - Layer Thickness: approx. 25 – 150 μm (depending on material) - Print Speed: up to approx. 45 mm/h - Light Source: High-performance DLP projector, 385 nm UV LED - Z-Axis: Dual linear guideway for high precision - Power Supply: 110/220 V, 50/60 Hz, 5 A - File Formats/Software: STL, Envision One RP Software External Dimensions & Weight: - Device dimensions: approx. 406 × 406 × 1,118 mm - Weight: approx. 52 kg Advantages: - Very high level of detail and outstanding surface quality - Ideal for dental, product design, industry, prototyping, and small batch production - Fast print times thanks to cDLM technology - Large build volume for a desktop SLA/DLP system - Robust, precise, and suitable for industrial use Note: Perfect for companies, laboratories, and workshops looking for a reliable, professional, and almost new device. Inspection possible.

Condition: ready for operation (used), Year of construction: 2021, This EVO-tech EL-102 V2 was manufactured in 2021. A plastic 3D printer featuring a robust 400 VAC system, it operates efficiently within a temperature range of 5–35 °C and humidity levels of 20–85% RH. It adheres to safety with IP41 protection and CE marking. Consider the opportunity to buy this EVO-tech EL-102 V2 plastic 3D printer. Contact us for more information. Gedex D Sicspfx Aayekf Application Types 3D Printing

Condition: like new (used), functionality: fully functional, machine/vehicle number: SG79434002, Year of construction: 2019, operating hours: 1,090 h, (English below) A very well-maintained HP MJF 4200 machine is for sale. Only PA12 was printed with it. This machine has only 1090 operating hours or 68 full build jobs (verifiable) on the clock. During operation, there was always an active HP service contract. This means all parts/problems were immediately resolved directly by HP. Since the machine is no longer in use (we have a newer version of this machine), there is no longer an active service contract with HP. The machine is connected to power and can be started. Print heads/powder/agents are not included in the offer, but can be obtained through us. If you have never worked with HP machines, we will be happy to help, as we have a lot of experience. The sale includes the printer + processing station + 2x build unit. This allows 24/7 printing. Pickup must be organized by the buyer or HP. We are happy to help with packing. All equipment can be viewed in Vienna. Gjdorg Dv Ajpfx Aayjkf 3D printer + processing station + 2x build unit.

Condition: like new (used), functionality: fully functional, machine/vehicle number: D362625, Year of construction: 2023, DWS DW 029XC – Professional 3D Printer – SN D362625 – As New Condition Installation Year: May 1, 2023 List Price: €95,000 Availability: Immediate Origin: DWS showroom, only used for demonstrations Condition: As new The DWS DW 029XC is in impeccable condition, coming directly from a showroom and used exclusively for demonstration purposes. The machine is perfect, fully operational, and available for any test or inspection in Turin. Clearance sale price. Technical Specifications • Technology: Laser stereolithography • Laser source: Latest-generation high-stability blue laser • X/Y axis resolution: 20 microns • Z axis resolution: up to 1 micron depending on resin • Build area: 90 x 90 x 90 mm • Layer thickness: from 10 to 50 microns • Production speed: Very high due to the high-precision laser • Motion system: Digitally controlled build platform • Compatible materials: All DWS industrial and dental resin series, including castable, rigid, flexible, transparent, and technical materials Gkodpfoxyuv Dox Aayjf • Resin loading: DWS cartridges with automatic management • Software included: Nauta Plus and Fictor • Connectivity: USB and Ethernet • Calibration system: Fast automatic calibration • Power consumption: Optimized for continuous professional use • Weight: approx. 45 kg • Power supply: 110/230 V Key Features • Micrometric precision • Ideal for jewelry, dental, fashion, and technical prototyping • Excellent surface quality • Professional-grade reliability • Compact, quiet, and simple to use • Certified showroom origin Sale Price Very advantageous price for clearance. Photos, videos, and full documentation available upon request. The machine can be inspected at any time in Turin.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, total length: 1,480 mm, total height: 2,040 mm, total width: 850 mm, overall weight: 360 kg, input voltage: 220 V, input current: 32 A, Mint condition XYZPrinting MfgPro230xS 3D printer from 2022. The device has hardly been used and is in excellent condition - perfect for anyone looking for a reliable and powerful 3D printer. Why the XYZPrinting MfgPro230xS? Outstanding print quality: With its precise printing technology and a resolution of up to 50 micrometers, the MfgPro230xS delivers impressive print results that meet the highest industrial standards. High printing speed: Save valuable time during production. The MfgPro230xS offers fast printing speed without compromising on quality. Large installation space: With a generous print volume of 230 x 230 x 230 mm, even larger projects are no problem. Ease of use: The simple operation and intuitive interface make this 3D printer easily accessible even for beginners. Reliability: Thanks to its robust design and high-quality components, the MfgPro230xS is extremely durable and reliable. With the XYZprinting MfgPro230 xS industrial 3D printing system, the most complex structures can be produced in one piece and without support structures using selective laser sintering in your workshop. Developed for professional use as well as for use at institutes and universities. Accessories: Sinterit FZ138 PHS Station Sinterit FZ101 ATEX Vacuum Cleaner 230V Sinterit Sandblaster SLS N2 Generator Gedpfet H I Tvsx Aayokf

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,504 h, Equipment: ABS, compressor, Printer is fully functional and it is still under power. Printer was not used much often only 1504 working hours There are available all model materials licences available in 2019. Gedpjw Imk Rofx Aayokf New PM Kit is on site and it will be installed just before printer dispatch to the new customer Support removal unit type EFT-900 is available

Condition: reconditioned (used), For Sale: EOS P100 – Ready for Immediate Use KNOW WHAT YOU BUY! Fully revised and with warranty! This EOS P100 has been fully inspected and revised, making it ready for immediate use in your production environment. Included in the package: • 2 build frames • Set of hoppers Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Build volume: 200 x 250 x 330 mm • Laser type: Synrad 48-3, 30W CO2 laser • Minimum wall thickness: 0.4 mm Consumables Highlight We offer a wide range of plug-and-play materials, fully tested and optimized for use with EOS machines. Our Inframotion PA12 delivers top performance and provides significant cost savings compared to OEM powders, without compromising on quality. Choose our exclusive materials to drastically reduce your operational costs. Gksdpfx Aaerm Tdwsysf Included Services: • Transport & Installation: Safe delivery in original EOS packaging and professional installation included. • Warranty & Maintenance Plans: Flexible options tailored to your specific needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we distinguish ourselves through extensive expertise and unique services. What we offer: • Expert maintenance: Installation, servicing, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS machines. • Complete support: From transport to maintenance plans, we handle it all. Trust IM3D for reliable machines, superior materials, and the expertise to optimize your SLS production. Feel free to contact us for more information or inquiries!

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 155-11000, Year of construction: 2022, total length: 129 mm, total height: 198 mm, total width: 90 mm, overall weight: 601 kg, input voltage: 208 V, input current: 18 A, input frequency: 60 Hz, ambient temperature (max.): 29 °C, Bring the speed, agility and design freedom of advanced additive manufacturing to your business while gaining the latest advances in FDM® technology. The Fortus 450mc™ 3D printer builds high-requirement functional prototypes, rugged manufacturing tooling and custom production parts in its large 406 x 355 x 406 mm (16 x 14 x 16 in.) build envelope. Fourteen Stratasys Preferred Materials1, multiple Stratasys Validated Materials2 and soluble support address a wide variety of applications. Gkjdpfxewx H Eds Aayef

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 1,500 h, warranty duration: 3 months, 3DGence Industry F350 High-Temp 3D printer in fully operational condition Compatible materials: PEEK, PEKK, Ultem, PC, PEEK-CF etc. Godox Avbtopfx Aayskf 3D printer including original accessories (3x extruder modules) Includes approximately 3 months of remaining warranty Inspection possible at any time!

Condition: used, Year of construction: 2014, working width 250 mm working length 250 mm work height max. 280 mm laser capacity in Watt 400 Rofin travel -z axis 10 - 1000 mm/s positioning accuracy +/- 0,1 mm repeating accuracy +/- 3,5 my capacity 6,8 kVA Required air-pressure 6-10 bar Type of gas Schutzgas Stickstoff 5 bar dimensions of the machine ca. 5,9 x 4,2 x 3 m range L-W-H 2,44 x 1,63 x 2,36 m weight 2 300 kg Little used Concept Laser M2 Cusing system for processing reactive and non- reactive powder materials. Design of process chamber, handling station, powder suction according to ATEX Directive II for flammable substances. Materials: steel, stainless steel + aluminum. Supplementing titanium against additional payment possible. Dynamic coating system with 3 different wiper blades. Peripherals and accessories: Rofin laser source - photo 4 Gsdpowdiwyefx Aayjkf Nitrogen generator (in the other room, photo 7) External filter including fan and operating hours counter: 10464 - Photo 8. Storage container for the filter inserts. Transport device with lift for powder loading - photo 9. 6 stainless steel powder charging containers. Pneum. Vibrating sieve for attachment to the powder container. Powder container rack for swap containers, dimensions 1.15 x 0.17 x 1.22 m - photo 10. Orange wet vacuum cleaner - photo 8. Selling due to production change. Price at the time € 1/2 mio! Vid 1: Machine outside, Vid 2: Machining - created on this machine, Vid 3: Slide show Workpiece creation on this machine + accessories. Machine dealer with own stock of 1600 m².

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, type of input current: three-phase, nozzle diameter: 1 mm, Best large scale 3d printer we have ever purchased and has run 4 years without missing a beat, Super reliable with zero failed prints. New nozzle and new print bed just installed, ready for new owner. Gedpfx Aevblu Djayjkf

Condition: excellent (used), Year of construction: 2007, For sale is a Dimension BST 3D printing center with serial number P1588. Gkjdpfoh Uc Iqsx Aaysf The center was used as a test center Interior component Table 203x203x305 mm Nozzle head computer controlled Material cassette automatically reloadable Technical data Dimension dimensions 686x1041x914 (WxHxD) Weight 136 kg Max construction volume 203x203x305 Electrical connection 230V, 60hz, 15A Accessories: - power cord - 20 material cassettes - instruction manual - Basic training manual - Div Software - 29 Table tops Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52181, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. Gksdpfx Aowna R Seayjf The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, warranty duration: 6 months, Polyamide laser sintering system including two interchangeable containers and unpacking station. The machine can be inspected and tested at any time at the BIBUS Austria demonstration center. Furthermore, the system features a quick-change mechanism between recoating blade and coater roller – the system is always up to date with the latest technology due to continuous upgrades. Gksdpsqwkypsfx Aayof

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52178, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Gsdpfx Aaswna N Uoyekf Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52177, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Gjdpfswna Nnjx Aayekf Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup.