Filter benche

- 1250 x 750

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Dedpfx Aasfyadbj Djwa Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Year of construction: 2022, condition: as good as new (ex-display), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal "Tested for wood dust according to BGI 739-1". YOUR ADVANTAGES Accessible from 4 sides Can be loaded with up to 150 kg Dwodpfodqzhbex Aa Doa Manual, tool-free height adjustment with scale Recessed longitudinal sides for edge grinding Workpiece-friendly beech wood grating (removable) Funnel-shaped air duct to the extraction nozzle TECHNICAL DATA AST 1.5 BASIC Extraction nozzle 140 / 160 mm Required extraction capacity 1,500 m³/h Negative pressure at the nozzle at 22 m/s 1,000 Pa at DN140 mm 700 Pa at DN160 mm Adjustable working height from 735-1,015 mm Working area (W x L) 946 x 1,500 mm Dimensions (W x L) 1,000 x 1,600 mm Weight approx. 73 kg

Condition: new, Year of construction: 2021, functionality: fully functional, Clean air dust extractor, mobile, certified for H3 residual dust concentration. The residual dust concentration of the air is below 0.1 mg/m³! This is achieved by the high-quality filter elements and the fan blades located on the clean air side. Dimensions: Dwodpfx Aey R D Sxsa Dea - Total length (A): 2275 mm - Total length (A1): 2640 mm - Total length (A2): 1165 mm - Total width (B): 1140 mm - Total width (B2): 1150 mm - Machine height (C): 2260 mm - Machine height (C2): 725 mm - Performance Data: Max. volume flow: 6000 m³/h Nominal volume flow at 20 m/s: 5090 m³/h Nominal pressure at 20 m/s extraction speed: 2680 Pa Extraction connection Ø: 300 mm Cartridge filter – Filter area: 50 m² Sound pressure level: 75 dB Chip containers: 2 x 250 l

Condition: excellent (used), 4 kW motor Transport dimensions Height 310 cm Width 90 cm Dwedpfx Aaoup Ulqs Dja Length 180 cm

Year of construction: 2025, condition: new, - With integrated extraction and pneumatic cleaning. - Various worktops available! (wood, grating, perforated plate) - Mobile with swivel castors Djdpfx Asxzt Uhsa Dswa - Plug-and-play ready

Condition: used, Year of construction: 2007, power: 3 kW (4.08 HP), intake manifold diameter: 160 mm, filter area: 10 m², total height: 1,800 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 04529 Mobile extraction unit / mobile dust extractor Felder RL 160 Used, year of construction 2007, good condition, machine comes from a small business Nominal air flow approx. 1750 m3/h Minimum air flow 1448 m3/h Maximum air flow 3250 m3/h Negative pressure at suction pipe 1720 Pa Nominal negative pressure 1120 Pa Extraction connection diameter 160 mm Motor 3 kW Residual dust content class H3, 0.1 mg/m3 Filter surface 10 m2 Design type B1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 Manual filter regeneration 2 chip collection containers, each 200 l GS-tested CE-compliant Transport dimensions approx. 1700 x 800 x 1800 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Dsdpfxozcqxus Aa Djwa Delivery terms: ex warehouse

Condition: new, Year of construction: 2024, functionality: fully functional, Extraction table without rear panel/side panels Dwjdpfx Ajuzf Ihea Dea Technical data: Work surface: 2,000 x 1,000 mm Working height: 850-950 mm (manual adjustment) Width: 2250 mm (including energy bar) Power strip with tool tray: 2x 230 V socket with hinged cover, 2x compressed air couplings, mains cable and main switch Extraction nozzle Ø 160 mm, with shelf

Condition: used, Year of construction: 2006, Nominal volume flow: 4900 m³/h. Minimum volume flow: 3532 m³/h. Intake nozzle: 250 mm. Static pressure at Vmin: 2740 Pa. Air pressure connection: 8.5 bar. Motor: 6.5 kW. Dwedszl Tdwopfx Aa Dja Storage location: Nattheim.

Condition: used, Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW Dwedpfx Aaezav Ebj Dja Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW TEKA-Dosiereinrichtung für Precoat, Filterpatronen gegen Verkleben schützen /  TEKA Precoat Dosing Unit: Protecting Filter Cartridges Against Clogging Baujahr / Year 2018 - Serial-No. 9501442110402 Filtersteuerung mit automatische Filterabreinigung / Filter Control with Automatic Filter Cleaning Motorleistung 11 kW / Motor power 11 kW Leistungsstarker Ventilator mit Steuerung / High-Performance Fan with Controls Ausführung SelfClean / SelfClean Version Ausstattung / Equipment: Standard Filterpatronen, Filterfläche je nach Luftleistung / 4 standard filter cartridges; filter area varies depending on airflow capacity Display gesteuerte Filterabreinigung / Display-controlled filter cleaning Ventilatorsteuerung / Fan Control Bogenschalldämpfer für Luftaustritt nach oben / Elbow Silencer for Upward Air Discharge Rauche und Stäube werden mit einer Filterleistung von über 99 % sicher abgeschieden / Smoke and dust are safely separated with a filtration efficiency of over 99% Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Grinding table with dust extraction Work surface: 149x105cm Overall dimensions: 149x105x160cm (H) + dust extraction port Dwsdpfjh Uci Eex Aa Dsa