Disk grinding machine

ZIMMERMANN SZ 1 V

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Djdpfx Ajk H Ic Usfnsun Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: good (used), Used radial drill SASS Mod.TRM 2200 Excellent condition, fully functional. Cube supplied Maximum diameter drilling from solid cast iron 20-22 100 mm Maximum diameter drilling from solid steel R=60 80 mm Sliding quill spindle diameter 102 mm Spindle morse taper 6 Spindle vertical travel 500 mm Rotational speed 32 Spindle speed values with 50 Hz motor - rpm/1' 18 ÷ 1600 Automatic feeds Maximum reach from column edge to spindle axis 2230 mm Minimum and maximum drilling radius 660 ÷2505 mm Head displacement on arm 1845 mm Vertical arm displacement 1040 mm Column diameter 550 mm Column height with motor 3720 mm Djdpfsikqz Sox Afnoun Base plate height 260 mm Base plate height 2490 x 1230 mm Spindle motor 11 HP Weight 9000 kg

Condition: excellent (used), functionality: fully functional, height adjustment type: electric, power: 90 kW (122.37 HP), input voltage: 380 V, Ready for work. Maximum capacity from the manufacturer 1.5T/H Dujdpfew Ulq Aex Afnen

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg Dsdpfxonzpx Rj Afnsun

Condition: new, Year of construction: 2025, Roller diameter: 640 mm Stand projection: 620 mm Dusdegtdpmepfx Afnen cutting depth: 400mm table tiltable: yes -0 to + 15° Table size: 870 x 620 mm belt speed: 1660m/min Motor power: 2,2 kW / 400V Motor brake: yes / automatic Suction connection: 2 x 120mm Machine length: 1190 mm Machine width: 780 mm Machine height: 2063 mm Weight: 320 kg

Condition: new, The KNWP H 100 is a robust Motorized Workshop Press, part of the Workshop Presses category by KNUTH. This hydraulic workshop press features a torsionally rigid welded gantry-style frame, making it ideally suited for professional use in technical workshops and maintenance departments. Its stable portal design includes an adjustable open support table that allows for versatile applications, such as pressing in and out bearings, assembly work, and testing workpieces. The press boasts a finely adjustable press force of up to 100 tons and a long piston stroke of 400 mm, ensuring efficiency and adaptability for various tasks. Operators can monitor the current working pressure via the built-in gauge, while the horizontal adjustment of the working cylinder simplifies setup without needing to reposition the workpiece. To enhance reliability, the KNWP H 100 is equipped with premium components and includes a motorized hydraulic drive, movable working cylinder, and height-adjustable work table. For anyone seeking a dependable Motorized Workshop Press, the KNWP H 100 is an excellent choice—request a quote today to add this essential tool to your lineup. Dsdeuyh A Eepfx Afneun

Condition: used, Year of construction: 1971, drilling capacity steel/GG: 23 mm Dodpfx Afjrz Nqaonjun spindle taper: 3 MK arm length: 275 mm table size: 300 x 400 mm spindle sleeve stroke: 90 mm spindle turning speed range: 100 - 1180 rpm carriages: 0,1/0,6/0,25 mm engine: 380 V, 1,25/2,15 kW space needed: 850 x 400 x 1770 mm weight: 280 kg

Condition: new, Year of construction: 2026, functionality: fully functional, A sandblaster connected to a compressor is an ideal solution for quick, accurate and effective cleaning of various surfaces, eg removing rust, paint, sludge from metal surfaces, such as: automotive parts, engines, fittings, casings, wheels, rims, hinges, etc. As abrasive can be used, among others: sand made of plastic, corundum, quartz, glass, etc. The sandblaster we propose is very well equipped and prepared for work. Machine description The machine is equipped with a proven control system, a solid and roomy chamber with side doors, a solid sandblasting gun, four ceramic nozzles, high-quality work gloves, workspace lighting, a large window - a viewfinder (without a blind spot). The recommended device is provided in addition to a compact construction and a large and spacious workspace, ease of use, reliability and work safety. Dust-free operation of the device is ensured by the use of perimeter gaskets, which allows you to perform work in an environmentally friendly way. The blasting hose was placed in the bottom of the collecting container. The drain hole allows a quick change of material for sandblasting. The advantages of our sandblaster model Complete for use Dujdorh Erxspfx Afnon Comfortable sandblasting gun with 4 interchangeable ceramic nozzles Large, stable side door with rubber perimeter gasket for safe and dust-free operation High-quality rubber gloves integrated with the device Venting connection Efficient lighting of the working space 4 pieces of removable protective film for the window, viewfinder Sanding hose located in the bottom of the collecting container Adapted to work with various abrasives The drain hole allows a quick change of material for sandblasting Ease of use, reliability and work safety Technical data Workspace dimension 840x550x370-550 mm Air consumption 400-700 L/min Required air pressure 2,75 - 5,5 BAR Arm hole opening 180 Air connection 1/4" Weight 49 kg We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), cutting width (max.): 700 mm, cutting height (max.): 120 mm, Right-hand machine, machine number 188 Dusdpjv Raqxsfx Afnjn Electrically adjustable hydraulic width adjustment Infinitely variable feed rate from 0-80 m/min 37 kW drive motor with V-belt pulley, motor tensioning rail, Various saw heads, shims, and saws Infeed table with individual trestles Fixed outfeed table The machine has been completely overhauled and is in excellent condition.

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Dedpfoghtvaex Afnoun Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition