Welding Table

WMT PM 1200 x 800

Condition: new, Ramp 10T premium, internal usable width 2m TM-GROUP, the best choice on the market. ⭐️ Galvanized ramp grating! ⭐️ ✅ Specification: - Manufacturer: TM-GROUP - Maximum lifting capacity: 10 tons - Internal width of the ramp: 2000cm - ELECTRIC and manual control of the ramp height 1m - 1.6m - galvanized ramp grating - Reinforced ramp barriers on both sides - Solid rubber transport wheels - Central ramp handle allowing the ramp to be moved with a forklift - Adjustment of the angle of inclination and height of the flap - Double-sided, reinforced ramp supports - Moving elements of the ramp equipped with lubricators - The ramp is also equipped with a reel ✅ Ramp grating: - Galvanized grating with anti-slip grooves. Safe and secure ground. Forklift and pedestrian traffic are guaranteed the best possible traction and solid support. The competition mainly offers ramps in which the approach is made of sheet metal covered with mesh. Our product has the aforementioned grid with grooves - a much more durable solution, thanks to which dirt from under the forklift wheels does not remain on the ramp, and the truck itself does not slip. ✅ Forklift handle - can be installed on both sides: - Convenient and quick attachment for the forklift allows the ramp to be transported in all directions. A specially designed handle allows the ramp to be maneuvered even in limited space. ✅ Chain for connecting to a TIR, wagon or permanent warehouse ramp: - A solid steel chain is another advantage of our ramp, additionally, the protection excludes the possibility of the ramp moving during loading work. Kedswa Smpspfx Ag Uedg ✅ Solid side barriers: - Safety barrier with the possibility of unscrewing and installing a frame/roof (roof is optional). ✅ Electric control of the ramp height: - Smooth electro-hydraulic drive uses a high-class pump. The pump requires 230V, so it can be operated from a regular socket. ✅ Double-sided hand pump: - Hydraulic pump for height adjustment in the absence of the possibility of connecting to the electro-hydraulic power supply - double-sided lifting. This is an excellent solution ensuring work in all conditions. ⭐️ We offer the following variants: ⭐️ - Driveway width in the ranges of 1700 cm, 2000 cm and 2500 cm Standard, Premium and Premium plus. - Mobile ramps with a load capacity of 10 tons, 15 tons and 20 tons and 25 tons. - Thickness of driveway grids 3 - 5 cm. - Colors: red, blue, black and green (it is possible to produce a ramp in any color - individual order) - Mobile ramp with tarpaulin. As a manufacturer, we can produce ramps for special, individual orders - with different dimensions, load capacities or variants. Do you need an individual solution that you cannot find by browsing all the ads? Ask our specialist. Tags: Loading ramp, unloading ramp, loading ramp, mobile ramp, loading dock, loading dock, mobile loading ramp, mobile loading ramp.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 Kdjdpfxofgyicj Ag Ujg saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, 15000 kg length 10000 mm width 2450 mm height 625 mm lenkbar lenkbar size of tyres 425 x 260 mm Kdjdofrzvlspfx Ag Usg weight of the machine ca. 2,9 t dimensions of the machine ca. ca. 11,7 x 2,5 x 0,625 mm Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance - Reversible drawbar, Length 1320mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us.

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, Protec KT 2000 HV, Hydraulically height adjustable Load 2000 KG Manual remote control with digital display Kodpfencfvhjx Ag Ujdg Double foot remote control Height approx. min. 800mm tilted to middle , height max. 1400mm Height min. horizontal 1000mm diameter faceplate 1200mm Tilt angle min. 135 Speed 0,05 to 0,9 rpm. Motor power 3 KW

Condition: excellent (used), Heating boiler Loos UT 5200Kw.incl.oil burner Kdedpsmn Hpysfx Ag Ueg

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm Kjdpfx Ashzbipeg Uodg - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 2017, machine/vehicle number: 119, Lg.no. 24217 Technical data: Kdedjtpnplopfx Ag Ueg - max. working width 2520 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - preselectable bending angle setting - upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, Kdjdpfjd Hy Elsx Ag Ueg feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized control Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO position control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at the front for access protection - 3 material support arms with ball rollers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Extremely heavy-duty machine in very robust construction Base machine dimensions L x W x H: 4650 x 2610 x 3200 mm Base machine weight: 27,000 kg Transport space required (base machine) L x W x H: 4650 x 2610 x 3200 mm Ksdpfxjd Hxx As Ag Uodg Transport space required (additional) L x W x H: 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau. Test cuts possible.

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items available! !! SPECIAL OFFER !! SIEGMUND Welding Table Retro 2400x1200x200 incl. accessories Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole Ø 28 mm - Holes surface 100x100 mm grid - Corners, edges, and holes rounded - Side panel height 200 mm Kdodpfx Aexflftjg Ueg - Side panel holes in diagonal grid - Construction reinforced with ribs - Grid lines enable precise assembly The welding tables are equipped with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Features: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version with scale - Includes 4x feet Basic equipment - Includes accessory set (see image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999