Vertical band saw

Weipert KB 45

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Hodpfsd Spf Rjx Aa Eeg Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: used, Year of construction: 1967, functionality: fully functional, table width: 1,000 mm, table length: 810 mm, overall weight: 11,000 kg, workpiece weight (max.): 1,200 kg, spindle speed (max.): 1,600 rpm, spindle speed (min.): 32 rpm, spindle diameter: 120 mm, space requirement height: 2,475 mm, space requirement length: 3,970 mm, space requirement width: 2,230 mm, Equipment: rotational speed infinitely variable, - Maximum power consumption: 14 kW - Rated spindle power: 8 kW - Spindle drive power: 8 HP - Control voltage: 110 V - Table rotation continuously 360 degrees in both directions Hjdpfxewdwqne Aa Esg - Transverse table stroke (X-axis): 760 (+20) mm - Longitudinal table stroke (Z-axis): 760 (+20) mm - Vertical headstock stroke (Y-axis), min. and max. height of the spindle axis above the table: 50-710 (+20) mm - Rapid traverse: 2 m/min - 9 adjustable feed rates: 0.04 - 0.6 mm/rev - Hydraulically continuously adjustable working feed rates in manual mode (strokes): 0 - 3000 mm/min - Optical reading accuracy: linear axes 0.001 mm / manual rotary axis 1 sec. arc - Positioning referenced Accuracy on the built-in scales: ± 0.0015 mm / ± 2 sec. arc - With central lubrication of the guideways - Internal spindle: ISA No. 40 steep taper with Dixi bayonet, diameter 75 mm - Extras: Various tool holders, accessories, and operating instructions are included.

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces. Hjdsfqpxispfx Aa Ejg

Condition: used, Tool holder, milling holder, milling tool -Number: 515x SK50 holders with tool holder from KOMET GEWEFA and others -Standard mount: ISO 7388-1 SK50 Hsdpfxspgkwgs Aa Ejg -Standard pull studs: ISO 7388-3 -various designs -Drill chuck: face chuck, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -Delivery complete as shown in the pictures -Dimensions: 10x Euro pallets -Weight: 2464 kg

Condition: new, Year of construction: 2025, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. Hodpfoi D Dgwsx Aa Eeg The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 1,5 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 280 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, WMD30LV - 230V / 1F Drilling capacity steel ----- 32 mm Milling capacity steel ----- 20 mm Flute cutters ----- 76 mm Motor ----- brushless 1.5 KW Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 70 mm Spindle mounting ----- ISO 30 Worktable ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal displacement ----- 565 mm T-slots ----- 3x14 mm Unloading ----- 240 mm Distance spindle - table ----- 470 mm Weight ----- 230 KG STANDARD ACCESSORIES * Drill head incl. drill chuck * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch Hedega T Agepfx Aa Ejg * Milling head left / right 90 degrees rotatable * Toolbox OPTIONS * 3-axis digital readout * Base cabinet * Automatic longitudinal feed * Milling clamp * ISO30 Collet holder & 12 collets in case * Milling set

Condition: excellent (used), Vertical band saw JAESPA type MSU 4roller diameter 420 mmoutreach 400 mmtable size 615 x 615 mmcutting height 350 mmsaw blade length min. 3450 - max. 3640 mmsaw blade speed 20-2500 m/min. stepless mains connection 400 volt, 50 Hz - stepless saw band speed over 2 motor speeds, 2 gear stages and stepless belt drive - saw table swivelling - 2 gear stages - saw blade butt welding machine IDEAL BS 0-16- saw blade shear - grinding stone for grinding the weld seam space requirement L x W x H 1100 x 950 x 2000 mmWeight approx. 700 kgsehr good, immediately operational condition2 identical machines in stock Heded Tx D Uspfx Aa Eeg

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: iTNC 530, rotational speed (max.): 18,000 rpm, overall weight: 12,500 kg, General Data Measurements width 3970 mm Measurements depth 4629 mm Dqmcjh Measurements height 3050 mm Hedpfxjvambio Aa Eeg Machine weight 12700 kg Main Drive Number of spindles 1 Spindle speed range 16000 rpm Spindle motor power 10 kW Tool taper SK 40 Number of axis 3 Movement X-Axis Movement 1200 mm Y-Axis Movement 900 mm Z-Axis Movement 500 mm Unfpvoddib Table Outer length 1400 mm Outer width 900 mm This 3-axis HERMLE C 1200 V vertical machining centre was manufactured in 2003. It features a robust clamping table measuring 1400 x 900 mm and a high-performance milling spindle with a maximum power of 10 kW, torque up to 87 Nm, and speeds up to 16,000 RPM. Ideal for complex machining tasks, the HERMLE C 1200 V machine we have for sale offers precision and durability. Tool magazine can be dismantled so the width can be reduced to 2500 mm. Contact us for more information. Application Types Milling

Condition: new, OPTIMUM OPTIsaw S275N metal band saw - Exhibition machine - Feed infinitely adjustable, tiltable ----- Technical data ----- Swivel range: 0 - 60 °, Cutting height: 150 mm, cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg Hedju R S Hpepfx Aa Eog - new exhibition machine -

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm turning length 1500 mm Hodpfx Ast Tqgxea Eog spindle bore 65 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U total power requirement 9 kW weight of the machine ca. 4,5 t