Moulder

WEINIG UNIPLAN 23

Condition: reconditioned (used), Working width 230 mm Working height 15-120 mm Number of spindles 2 St. Weinig Hydro Planer Type Uniplan 23 ----- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. Machine with full enclosure and integrated sound and dust protection including interior lighting. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC - 204 - 1. Chodpfexpn Tzsx Ad Ioc Other electrical regulations are not taken into account. Machine includes operating tools, but does not include machining tools. The Weinig Uniplan spindles operate at a speed of 7200 revolutions per minute. Before using existing tools, please check that they are suitable for the speed. Please also consider this when ordering new tools. Technical specifications Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed: 3 kW (4 HP) Horizontal spindles each: 7.5 kW (7.5 HP) Infinitely variable feed speed: 6 - 36 m/min. Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Maximum tool radius: 163 mm Fixed clamping clearance at bottom: 0.5 mm (Technical data according to the manufacturer - no guarantee!)

Condition: ready for operation (used), Wurster & Dietz round timber intake station with singulator and block chain conveyor with ejector. Chjdpoyxrtaofx Ad Ioc

Condition: reconditioned (used), Number of spindles 8 St. Working width 230 mm Working height 120 mm Weinig Planing and moulding line ----- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the Chjdpjxpn Tusfx Ad Iec mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!)

Year of construction: 1996, condition: used, Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible. Codpfx Adjz Da R So Iehc

Condition: reconditioned (used), functionality: fully functional, empty load weight: 2,400 kg, Compact sawing machine with mechanical centering infeed, el.motors 2x75 kW and 2x90 kW, machine can be equipped with edging block and electric-operating cabinet with frequency converters TECHNICAL DETAILS Top diameter: 80-230 mm Cjdpfx Asxfrmwsd Ishc Maximum log diameter: 350 mm Minimum log length: 2.4 m Cant height in Chipper Canter: 60-232 mm Cant width in Chipper Canter: 70-210 mm Line speed: 70-150 m/min Chip length: 20-30 mm

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Chedpfx Asyy A Iqjd Ioc Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: new, number 100 Positionen 28 mm condition neu weight 280 kg dimensions 1,2 x 0,5 x 1,3 m XXL starter package, consisting of: - 15x – standard clamping pliers - 5x – multi-clamp pliers - 10x – side tensioners with eccentrics Csdpfx Aou Aw Ngjd Iehc - 15x – Loose cam H30 - 10x – Loose cam H100 - 2x – pipe insertion cam series - 10x – quick release bolts - 10x – stop block 15mm - 4x – Right Angle XL - 6x – Right angle - 6x – angle of attack - 1x – box - 1x – Insert holder - 1x – Allen key - Tool trolley

Condition: new, Year of construction: 2026, 🔥 AVAILABLE NOW – READY FOR IMMEDIATE DELIVERY! 🔥 NEW WRAVOR WRC 1050 AC -- High-performance industrial horizontal band saw Looking for a powerful and reliable saw without a long delivery time? The brand-new WRAVOR WRC 1050 AC is robust industrial machine is equipped with a powerful 45 kW main motor and can process logs with a diameter of up to 1,050 mm. TECHNICAL SPECIFICATION • Maximum log diameter: 1,050 mm • Main motor: 45 kW • Control system: Schneider PLC with 12″ PRO touchscreen and dedicated WRAVOR cutting program • Track length: 11.00 m • Hydraulic log clamps: 5 • Hydraulic rollers: 4 • New-generation log centring devices: 3 • Hydraulic V-type log turners: 3 • Mechanical log support: 1 • Hydraulic pre-cutter: 1 • Log loading system with 3 arms • Outfeed conveyor belt for sawn timber • Log loader for passing logs onto the bandsaw Csdpfx Aozudauod Iehc Upgrade your production with a new WRAVOR industrial band saw. 📩 Contact us for the price, complete technical specifications and delivery details. WRAVOR – Built for performance. Engineered to last.

Condition: new, Type 400C Surface planer: Chodpfx Adjd Nl Sfe Ijc Table dimensions 400х1800 mm Cutterblock diameter 70 mm Cutterhead rotating speed 5700 rpm 3 knives 400x20x3 mm Max table adjustment 4 mm Thickness: Table dimensions 400x760 mm Max cutting depth 4 mm Feed speed 7 m/min Cutterblock rotation speed 5700 rpm Max working height 220 mm Min working height 4 mm Mortising: Table dimensions 250х500 mm Longitudinal stroke 205 mm Trasversal stroke 95 mm Chuck (SX) 16 mm Chuck rotation speed 5700 rpm Motor 3 kW Accessories: service wrenches, guards on mortise chuck, planer guide. Weight 390 kg

Condition: new, Year of construction: 2024, Padeves trepe. Stepfeeder. For log feeding and separation Height from 1.0 m. Width from 1.8 - 6 m For material diameters from 5 - 20 cm Speed up to 20 pieces/minute Cedpfxjudzyco Ad Iohc Hydraulic Automatic feed