Four side planer U22A, 7 spindles

WEINIG U22A

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: KR210 R3100 ultra KRC4, overall weight: 1,154 kg, load capacity: 210 kg, arm reach: 3,095 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. Reliability as Standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: KUKA Type: KR210 R3100 ultra Controller: KRC4 Rated Payload: 210 kg Reach: 3095 mm General purpose: For heavy payloads and much more. Nodpfxexxamle Akiown Delivery time: To be agreed upon. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash), especially useful for 3D applications such as 3D milling, 3D printing, and 3D trimming. About: Our daily business is the reliable supply of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Established in 2002. We ship worldwide.

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Nedsxz Hh Uepfx Akiewn Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: excellent (used), functionality: fully functional, Weinig Profimat 23 Fortec four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Arrangement of spindles Bottom 7.5kw Right Left 11kw Top 7.5kw Top 5.5kw Bottom 5.5kw Njdpfx Ajumxqrskiswn Pneumatic pressures Feed speed adjustable on variator Drive on cardan shafts CE certificate

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm elevated on pedestal u- re-li-o-u.o without feeder Nwedencc Igepfx Akisn only machine machine is dismantled, immediately available Transport can be organized

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Dimter / Weinig OptiCut 450 Quantum Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 450 Quantum Year of manufacture: 2006 Nsdpfx Akjyu Urieiswn Machine description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for high-speed and precise cross-cutting of timber with yield optimization. The Quantum version is one of the top models in the OptiCut 450 series and was developed for industrial use with extremely high output, precise positioning and reliable material transport. The machine is suitable for fixed-length cutting, defect cutting and production optimization. The OptiCut 450 series was designed for integration with scanners, sorting systems and automatic handling equipment. Typical Quantum features include VarioSpeed infeed, HighGrip feed rollers, an independent length measuring system and a servo-controlled intelligent waste gate. Technical data: - capacity: up to approx. 540 cuts/min - feed speed: approx. 300 – 415 m/min - maximum workpiece length: approx. 6.3 m - saw blade diameter: 450 mm - maximum cutting width: 235 mm - maximum cutting height: 100 mm - working height: 900 mm - motor: 7.5 kW - air consumption: approx. 1200 NL/min - cutting accuracy in the OptiCut 450 series: approx.± 0.8 mm Features / advantages: - extremely high cutting performance - high positioning accuracy - VarioSpeed system reducing gaps between boards - HighGrip rollers for secure material transport - servo-controlled waste gate - suitable for integration with scanners and sorting lines - proven Weinig / Dimter technology for continuous industrial production Condition: very good Note: Technical details may vary depending on the exact machine configuration, control version, handling equipment and installed options.

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle at 45° left or right 200mm round 180x180mm rectangle at 30° left or right Nwjdpfxezrmk Rj Akisn 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of hydraulic lifting of the saw frame.

Condition: reconditioned (used), working length 3600 mm Working width 1140 mm Working height 820 bis 1050 mm WEINIG RF15 Return Conveyor System ----- Suitable for use after a chamfering, planing, and milling machine with a maximum feed speed of approximately 22 m/min. For the continuous return transport of workpieces to the operator. After passing through the planer, the workpieces are transferred to a roller conveyor, where they are conveyed transversely and then taken over by a driven roller conveyor. This conveyor directs the workpieces onto a downstream longitudinal roller conveyor back to the operator and also serves Nedpfoxpn Tnjx Akiown as a parts buffer. Manufacturer’s technical specifications: Workpiece length: 250–3,600 mm Workpiece width: 30–230 mm Min. workpiece thickness: 10 mm Max. feed rate of the planer: 22 m/min Cross conveyor with 2 integrated roller conveyors: Cross conveyor length: 1,140 mm Constant conveyor speed: 30 m/min Max. cycles per minute: 40 Roller conveyor length: 2,200 mm Constant speed: 30 / 60 m/min Gear motor: 1 kW (1.3 PS) Operating voltage: 220/380 volts, 50 hertz Compressed air connection: 6 bar Longitudinal roller conveyor (non-driven): Length: 1,700 mm Width: 160 mm Swing-mounted, adjustable incline Special equipment: Extension of the longitudinal roller conveyor (non-driven) by 3,000 mm ----- Price of the above machine available upon request! ----- (Technical data according to the manufacturer—subject to change without notice!)

Condition: new, Year of construction: 2026, machine/vehicle number: diverse, The professional solution for crosscuts, miter cuts, and bevel cuts The ZS 200 N is ideally suited for crosscuts, miter cuts, and bevel cuts. Materials such as wood, PVC, and aluminum profiles can be processed cleanly and precisely. The saw unit runs on a hardened guide arm and can be swiveled horizontally on both sides for miter cuts. The "N" stands for "Neigung" (inclination) and indicates that the saw unit can also be tilted vertically on the side – thus, bevel cuts can also be carried out easily. Fact Check ZS 200 N Crosscut and miter saw with a maximum cutting height of 200 mm Njdpfx Akjh Nu Iueiewn Stable cast iron construction Precise ball bearing guide of the tool carriage on hardened and ground steel shafts Manual saw feed Fast miter adjustment up to 65° horizontally and up to 60° vertically Adjustable stops and lower saw blade guard Can be connected to a dust extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical Details: Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal 45°-90°-25° Miter range vertical 60°-90°-30° Saw blade diameter 520 mm Weight 310 kg Scope of delivery: Miter and bevel saw ZS 200 N Machine stand Machine can be tilted on both sides from the front Hydraulic feed brake Circular saw blade HM Z 60 negative Operating tool and hand crank

Year of construction: 2001, condition: good (used), Heavy-duty roller conveyor, 2 units, driven Overall height: 600 mm Width: 1400 mm Length: 7000 mm Njdpfx Akeh Icrnjiswn All dimensions are approximate System is immediately available and has already been dismantled.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x930x1500 mm Nodev A Hgqspfx Akiswn Weight 700 kg Total power requirement 1,65 kw